Professional Dera Professional 1500W PPR Pipe Welding Machine And Pipe Cutter Set Fusion Welder Hot-melt Plastic Welding Machine For PPR, PE, PP (20-63mm) in 1-petrol-welder-generator-wg-200i-100-copper-coil-120-amps

1. Install the radiator on the fixed welding equipment, put the welding equipment on the rack, install the corresponding heating mold according to the required pipe specifications, and tighten it with a wrench, usually at the front end.

2. Turn on: Turn on (note that the power supply must be equipped with a grounding protection wire), the green indicator light is on, until the green indicator light is off, and the red indicator light is on, indicating that the fuse enters the automatic temperature control state, and you can start to operate. Note: In the automatic temperature control state, the red light and the green light will light up alternately, indicating that the fuse is in a controlled state and does not affect operation.

3. Welded pipe: The pipe cutter cuts the pipe with a straight pipe. The pipe and the pipe enter the fuse mold without rotating at the same time, and operate according to the requirements of the table. After the heating time is reached, the pipe and the pipe are taken out of the mold at the same time, quickly and Directly enter the required uniform depth without rotation, so that the seam opening becomes uniform.