Pedrollo Water Pump 1HP in 1-pack-100-cotton-all-white

The PEDROLLO CP range are non self-priming closed impeller pumps with integral motors. They are efficient, quiet and rated for continuous duty making them suitable for water boosting and transfer in a variety of domestic, industrial and agricultural applications. They are also particularly suited to automatic pressurized supply using either a surge tank or 'Press control' unit. Pump construction material is cast iron for the casing and brass alloy for impellers except Cpm130 which uses techno plastic and CPm150 which uses stainless steel.

MOTOR
Pumps are close coupled to a Pedrollo brushless TEFC induction motor designed for continuous operation. Single phase motors are provided with a thermal cutout in the winding to protect against electric and mechanical overload and can be connected directly to the mains power supply through a 10Amp fuse or MCB. Three phase motors require remote DOL starter protection according to local regulations.

Enclosure Class: IP44 Insulation Class: F Speed: 2900 rpm

OPERATING CONDITIONS
Pumped liquid: Thin, clean, chemically non-aggressive liquids without solids or fibres.
Max. Fluid Temperature: CPm130 - +400C, Other Models - +900C
Max. Ambient Temperature: +400C
Max. Suction lift: 7 m (at sea level)

The PEDROLLO CP range are non self-priming closed impeller pumps with integral motors. They are efficient, quiet and rated for continuous duty making them suitable for water boosting and transfer in a variety of domestic, industrial and agricultural applications. They are also particularly suited to automatic pressurized supply using either a surge tank or 'Press control' unit. Pump construction material is cast iron for the casing and brass alloy for impellers except Cpm130 which uses techno plastic and CPm150 which uses stainless steel.

MOTOR
Pumps are close coupled to a Pedrollo brushless TEFC induction motor designed for continuous operation. Single phase motors are provided with a thermal cutout in the winding to protect against electric and mechanical overload and can be connected directly to the mains power supply through a 10Amp fuse or MCB. Three phase motors require remote DOL starter protection according to local regulations.

Enclosure Class: IP44 Insulation Class: F Speed: 2900 rpm

OPERATING CONDITIONS
Pumped liquid: Thin, clean, chemically non-aggressive liquids without solids or fibres.
Max. Fluid Temperature: CPm130 - +400C, Other Models - +900C
Max. Ambient Temperature: +400C
Max. Suction lift: 7 m (at sea level)