The EM7000 is a FET (field-effect transistor) analog multimeter with a zero-deflection scale, which is great for testing low-power circuits. It has anaccuracy of ±3.0%of full scale, and can also measure the peak-to-peak values of an input signal (triangular, square-wave) over a 20% duty cycle. The device is also capable of measuringresistances up to 200MΩand ishighly sensitive when measuring lower value capacitances.It is recommended to use the device in an environment with a temperature less than 40 degrees Celsius at a maximum altitude of 2000m indoor, with pollution degrees level II.
The EM7000 comes with a set of test leads (TL-21a), instruction manual and a spare fuse (250V / 0.5A). The device is professionally calibrated by Sanwa and comes with a certificate of calibration.
- Zero center meter (NULL) of DC Voltage and DC Current
- The frequency characteristic of AC low voltage ranges
(3V and 12V) is 40Hz～1MHz (sine wave AC) - The Vp-p of triangular-wave, square-wave over 20% duty cycle voltages of waveforms can also be measured (at 3V range)
- Wide ohm range 0.2Ω～200MΩ
- ±3.0% of full scale
