Tripp Lite APSX750F 750W APS X Series Inverter Charger

Specifications OVERVIEW UPC Code 010-100-110122 OUTPUT Nominal Output Voltage(s) Supported 230V Frequency Compatibility 50 Hz Output Receptacles (2) Universal outlets Output (Watts) 750 Continuous Output Capacity (Watts) 750 Peak Output Capacity (Watts) 1500 Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%). Output Frequency Regulation 50 Hz (+/- 0.3 Hz) Overload Protection Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads INPUT Nominal Input Voltage(s) Supported 230V AC Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 100A minimum battery system fusing is recommended. AC INPUT: 230VAC Maximum Input Amps / Watts DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions) Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection Voltage Compatibility (VAC) 230 Voltage Compatibility (VDC) 12 BATTERY Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries DC System Voltage (VDC) 12 Battery Pack Accessory (Optional) 98-121 sealed lead acid battery (optional) Battery Charge Selectable 5 / 20 amp with 1/2 cycle (10 ms) transfer time Expandable Runtime Yes USER INTERFACE, ALERTS & CONTROLS Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences. Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads. SURGE / NOISE SUPPRESSION AC Suppression Joule Rating 1020 PHYSICAL Shipping Dimensions (hwd / cm) 31.50 x 26.67 x Businessclaud.com shownipping Weight (kg) 9.30 Unit Dimensions (hwd / cm) 17.78 x 22.23 x 22.86 Unit Weight (kg) 8.44 Cooling Method Multi-speed fan Material of Construction Polycarbonate Form Factors Supported Mounting slots enable permanent placement of APSX750 on any horizontal surface (see manual for additional mounting information) ENVIRONMENTAL Relative Humidity 0-95% non-condensing LINE / BATTERY TRANSFER Transfer Time (Line Power to Battery Mode) Transfer time from line power to battery mode: 10 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications) Low Voltage Transfer to Battery Power Low voltage transfer to battery power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual) High Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272 CERTIFICATIONS Certifications RoHS Compliant WARRANTY Product Warranty Period (International) 2-year limited warranty