Computer networks

Extralink Single Mode Fiber Patch Cord | LC-LC/UPC, 5M, Duplex Connector type > LC-LC/UPC Length > 5M

Type a description for this product here...

The DES-102F is a two-port Ethernet module design to support the DES-1024R+ and DES-1016R+ Switches as an optional slide in module, which provides a two port 100BASE-FX Fast Ethernet connection. As an expansion module, the DES-102F increases connection distances without requiring signal regeneration using a repeater to re-boost the signal. With the two SC type port connectors, connection utilizing a fiber link can be initiated to servers or backbone switches for network expansion. DES-102F is targeted at small and medium businesses.

CAT6 Snagless 6ft Moulded Patch Cable Blue Tripp-Lite

Tripp Lite's 1-meter multimode duplex fiber optic ST/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC to ST connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. Features Manufactured from 62.5/125 duplex (zipcord) fiber PVC jacket Length: 1-meter/Connectors: 2 ST/LC connectors on each end Insertion loss testing performed on every connector (0.2db typical) and provided with cable Beveled edge on ends of glass makes insertion of plug a breeze Fiber made from glass (not a polymer) Duplex multimode fiber is most commonly used in LAN applications where links are 10 feet or less Fiber optic distributed data interface (FDDI) rated OFNR (riser rated System Requirements Any fiber optic hardware or NIC card requiring multimode duplex cable with ST/LC connectors

Brand: D-Link

D-Link DES-8503E Chassis of DES-8503E (including 1 fan tray, 2 power supply slots, 1 control module slot and 2 service slots)

SC-SC 3 Meters Duplex OM1 Multi-Mode Fiber Patchcord

Extralink Multi-Mode Fiber Patch Cord | SC-SC/UPC, 5M, Duplex

Buy the Businessclaud Mikrotik RBSXTG-5HPacD Antenna from Businessclaud for genuine quality and reliable products. We provide authentic products with full warranty, fast nationwide delivery, and dedicated customer support.

Features Two-layer network management PoE switch Support IEEE802.3af, IEEE802.3at standard Support spanning tree protocol STP/RSTP Conform IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards Support one-key recovery of IP address & user password Specifications Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1x, IEEE 802.1Q VLAN, IEEE 802.3af, IEEE 802.3at Management via WWW / console: Yes LAN ports: 2 x port SFP 1000 Base-X 2 x RJ45 10/100/1000 Base-T 24 x RJ45 10/100 Base-T ( 24 x PoE (802.3af/at) ) Transmission speed: 10 / 100 Mb/s – 24 LAN & PoE ports 10 / 100 / 1000 Mb/s – 2 Uplink ports 1000 Mb/s – 2 SFP ports Maximal output power: 30 W / port PoE Maximal total power: 370 W MAC addresses table: 16k Transmission method: Store and Forward Main features: Switch is web managed IEEE 802.1Q VLAN Spanning Tree STP/RSTP Full Duplex: PAUSE frame, Half Duplex: Back Pressure IGMP Snooping Hardware supports IP + MAC binding based on port IEEE 802.1x port authentication Upload and download configuration file System logs protection against lightning discharges and voltage differences and strokes between devices LED diodes: Power, Link/Act, Console Certificates: CE Power supply: 100 … 240 V AC Operation temp: -10 °C … 55 °C Weight: 3.836 kg Dimensions: 442 x 265 x 45 mm Manufacturer / Brand: DAHUA Guarantee: 3 years

Brand: D-Link

SIM card slot for a mobile broadband connection Four 10/100/1000 Ethernet LAN ports to connect, WAN port to connect to the Internet Supports WEP, WPA/WPA2 andWPA-PSK/WPA2-PSK Businessclaud.com-active rewalls (NAT/SPI) to control tra c and prevent exploits and intrusions

Punch Down Tool On Blister Card Yellow

Brand: Tripp Lite

Product code MTAS-5G-19D120 Beamwidth 120 deg (azimuth) 5 deg (elevation) Connector two RP-SMA Cross Polarization >30 dB Diameter x Depth 152 x 598 x 78 mm Frequency Range 5.17 - 5.825 GHz Front-to-Back Ratio >30 dB Polarization Vertical and horizontal Port to Port Isolation >40 dB min VSWR 1.43 typ, 1.8 max Weight 1270 g

Cat.6 UTP Patch Cable 1000Mbps 250MHz/ Stable surfing/Double twist Anti-interference/Refined Crystal interface 250MHz Stable bandwidth, 1000Mbps High Speed Supports bandwidth up to 250MHz, offers a maximum networking speed at price showns for you to surf the Internet, stream videos, music and other data without the hassles of slow network. One-Sec Installation Plug-&-play: Ready to use, once each end is connected to a respective port on a compatible device

Perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer. CPU: Qualcomm QCA9880 Memory: 64MB DDR SDRAM Ethernet: 1x 1Gbit/s Fast Ethernet port OS: MikroTik RouterOS, Level4 license

A cable clip is a device that manages wires and cables and secures them to a fixed point on a surface, like a wall, ceiling or floor. A wide range of cable clips is available to control cables of all sizes and shapes, in almost any number, in both home and industrial applications.

2-Post Rack-Mount or Wall-Mount Adapter Kit for select Rack-Mount UPS Systems Features Allows for 2 post mounting of Tripp Lite 2U rackmount UPS systems and battery packs with a maximum load capacity of 150 lbs Enables wall mount installation with select Tripp Lite 2U rackmount UPS systems and battery packs

D-Link DAP-3410/BAU 300Mbps outdoor IP65 Access point Part Number: DAP-3410/BAU The DAP-3410 is a Wireless N 5GHz Outdoor Access Point. It can be deployed to expand the coverage and signal strength of an existing wireless network or alternatively used as a low cost alternative to connect networks that are not joined physically by an Ethernet or fibre cable. Within PoE integrated as standard, the DAP-3410 is built to withstand harsh outdoor deployments. SPECIFICATIONS Type Software Managed AP Wireless standard Wireless N Frequency band mode Single-band Wireless speed 300 Mbps 5 GHz Antenna type Embedded sector antenna Antenna gain 15 dBi for 5 GHz Power-over-Ethernet Yes Wired interface 2 x Fast Ethernet LAN Indoor/outdoor Outdoor Type of housing Plastic IP rating IPX6 Wireless modes Access Point (AP) WDS bridge WDS with AP Wireless client Advanced features MIMO Maximum number of SSIDs 8 Auto channel selection Yes WMM-PS/802.11e (U-APSD) Yes Wi-Fi scheduler Yes WEP 64/128 bit Yes WPA/WPA2-Personal/Enterprise Yes TKIP/AES encryption Yes WPA_WPA2_PSK over WDS Yes SSID broadcast disable Yes Station isolation Yes MAC address filtering Yes 802.1X authentication Yes WEB Yes SNMP (v1, v2c, v3) Yes Telnet Yes SSH Yes Product Datasheet

Description Cisco SFP-10G-SR SFP+ Transceiver Module – 10 GigE Buy Cisco SFP-10G-SR SFP+ Transceiver Module – 10 GigE from Pavuta in Kenya Cisco SFP-10G-SR SFP+ Transceiver Module – 10 GigE details Cisco 10GBase-SR SFP+ module offers customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. This module boasts a variety of features and benefits, including being the industry’s smallest form factor which results in the greatest density per chassis. The modules are also hot-swappable and can be switched out with ease. These modules also feature Digital Optical Monitoring (DOM) functionality which allows for monitoring of the signal strength, the temperature of the SFP, and the transceiver voltage. The Cisco 10GBase-SR Module supports a link length of up to 300 meters on multi-mode fiber. The SFP-10G-SR requires a minimum of OM3 fiber. Cisco SFP-10G-SR SFP+ Transceiver Module – 10 GigE Quick Specs: Brand Cisco Manufacturer Part # SFP-10G-SR Cable Type Multimode Fiber (MMF) Min Operating Temp 32° F Max Operating Temp 158° F Wavelength 850 nm Transmit Power -7.3~-1.2 dBm Weight 0.05 lbs Transceiver Type SFP+ Interface LC Duplex Cabling Distance (MAX) 300 Meters (984 ft) Data Transfer Rate price showns Min Required Fiber Cable OM3 Power Consumption 1W Receive Power -9.9~-1.0 dBm Warranty Lifetime

Description Solid and reliable terminations, for copper cabling featuring a minimum of 3 mm 50 micro inch gold plated. Compatible with both 110 and Krone so as to punch down tools. Supports 22 to 26 AWG, because of stranded and solid wire. Bold like port numbering, because of the quick and ready identification of outlets. Additional mounting like hardware, for necessary tie wraps and mounting screws.

A cable clip is a device that manages wires and cables and secures them to a fixed point on a surface, like a wall, ceiling or floor. A wide range of cable clips is available to control cables of all sizes and shapes, in almost any number, in both home and industrial applications.

Brand: Ubiquiti

U TP Cable Cat6, 305m Roll Tembo

The Ubiquiti PowerBeam 5AC ISO Gen2 supports up to 450+ Mbps real TCP/IP throughput and features improved surge protection. The integrated isolator design also spatially filters out interference, so the PBE-5AC-ISO-Gen2 delivers improved noise immunity in co-location deployments. Ubiquiti PowerBeam 5AC ISO Gen2 Key Features Frequency 5GHz Throughput 450+ Mbps Range 25+ km Filers out interference to improve noise immunity Protective radome for shielding against weather conditions It also features a rear housing with a metal-plated interior, designed to enhance RF shielding, and an included protective radome, to shield the PowerBeam 5AC ISO Gen2 from harsh weather conditions.

16 x Gigabit Ethernet Ports 8 x PoE+ Compliant Ports 16 Gb/s Switching Capacity Desktop & Wall Mountable Design 45W Power Budget Includes Wall Mounting Kit Supports UniFi Network Controller

Brand: Ubiquiti

Tripp Lite B022-004-R 4-Port Desktop KVM Switch Description Tripp Lite's 4-port B022-004-R KVM Switch is the optimal solution for controlling 4 computers from one keyboard, mouse and monitor. Installation is a snap - just connect the PCs using Tripp Lite's P774-Series (PS/2) or P776-Series (USB) KVM cable kits (Not included). No software or complicated set-up procedures are required. Easily switch between computers via the front-panel push buttons or keyboard hotkey commands. Features ● Control 4 computers from a single keyboard, mouse, and monitor ● Supports VGA, SVGA, or Multisync monitors Connect to PS/2 and USB computers using Tripp Lite's P774-Series (PS/2) and P776-Series (USB) KVM cable kits (Not included) ● ● Easy to install - no software required ● Easily select a computer via front-panel push buttons or keyboard hotkeys ● Auto Scan function to monitor computer operation ● Supports Microsoft IntelliMouse and the scrolling wheel on most mice ● Superior video quality - up to 2048x1536; DDC2B ● External power not required ● Compatible with all major operating systems except Mac and Sun Highlights Control 4 computers with 1 keyboard, monitor and mouse ● Connect to PS/2 and USB computers using Tripp Lite's P774-Series (PS/2) and P776- Series (USB) KVM cable kits (Not included) ● ● Simple plug-and-play design Ultra-slim design takes up minimal space ● Compatible with all major operating systems except Mac and Sun ● System Requirements VGA, SVGA or Multisync Monitor with an HD15 port ● ● PS/2 mouse ● PS/2 keyboard ● PS/2 or USB computer P774-Series (PS/2) and/or P776-Series (USB) KVM Cable kit(s); 1 for each connected computer ● Compatible with all major operating systems except Mac and Sun ● Package Includes ● B022-004-R 4 Port KVM Switch ● PS/2 console cable kit ● Owner's manual OVERVIEW UPC Code 010-100-110143 Console No

A cable clip is a device that manages wires and cables and secures them to a fixed point on a surface, like a wall, ceiling or floor. A wide range of cable clips is available to control cables of all sizes and shapes, in almost any number, in both home and industrial applications.

-Link DWL-6610AP/UNA 11AC 2.4/5 Ghz Wireless Access Point with built-in Gigabit PoE

Brand: Tripp Lite

Brand: Ubiquiti

D-Link DGS-1510-28 Overview With extensive Layer 2 features and Layer 3 traffic management capabilities, the DGS-1510 Stackable 28-Port Smart Managed Switch with 10G Uplinks from D-Link offers enhanced networking functionality making this switch great for a variety of business needs. This model of the DGS-1510 Series of switches features 24 Gigabit Ethernet ports, 2 Gigabit SFP ports, and 2 10G SFP+ ports allowing for a variety of connection options. Performance enhancements include a 92 Gb/s switching capacity, a 68.45 Mpps forwarding rate, and price shown hour MTBF rate all designed to provide improved performance even when pushing the switch to its limits. Unlike other switches, the DGS-1510 features both Layer 2 and Layer 3 functionality. Layer 2 network features include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). Layer 3 traffic management functionality offers static routing so workgroups can communicate between VLANs which reduces the load on core devices. The combination of Layer 2 and Layer 3 functionality in conjunction with enhanced QoS functionality and improved network security make the DGS-1510 Switch a valuable tool in nearly any business networking environment. 10G SFP+ Stacking/Uplink Ports The last two SFP+ ports of the DGS-1510 Series switch allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Copper (DAC) cables or any compatible SFP+ transceiver. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Network administrators can also easily configure and manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gb/s full-duplex capabilities, the DGS1510 Series offers 10G connectivity to core networks and servers while still maintaining fast data transfer rates. Layer 3 Traffic Management The DGS-1510 Series provides static routing, allowing network segmentation into workgroups that communicate between VLANs and increase application performance. With these capabilities, network administrators can reduce the load on core devices, creating a scalable and efficient network. Extensive Layer 2 Features This DGS-1510 Series switch is equipped with a complete lineup of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection automatically detects and shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can determine cable quality and can quickly discover sections of cabling that need to be replaced. Traffic Classification and Quality of Service This DGS-1510 Series Switch supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart switches. This technology consolidates data and surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware and infrastructure. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets. Keep Your Network Secure D-Link's innovative Safeguard Engine helps to protect the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS1510 Series supports both MAC and web-based access control. This gives network administrators multiple authentication options, reducing deployment times and removing the need for client software. The DGS1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users' traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. IPv6 Ready The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 security features, and IPv6 Quality of Service (QoS), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv4/v6 dual stack functionality, which allows the switches to act as a bridge between IPv4 and IPv6 networks. Versatile Management The DGS-1510 Series supports a variety of management options. A web-based Graphical User Interface (GUI) enables administrators to easily set up and remotely manage their networks, greatly reducing switch deployment time. Two modes of GUI are supported - Standard Mode and Surveillance Mode. Surveillance Mode detects compatible ONVIF cameras and places them in a surveillance VLAN, allowing a single switch to be used for voice, video, and data, removing the need for dedicated hardware and reducing maintenance costs. The DGS-1510 Series also comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The DNA utility furthermore allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment and display them onscreen for instant access. This allows for simultaneous configuration and basic setup of all discovered devices, including password changes and firmware upgrades. The DGS-1510 Series also features an extensive Command Line Interface (CLI) and SNMP support, allowing centralized management of a large number of devices. Out-of-band management of the switches is also available via a designated console port. This provides access to devices in the event that there is a loss of connectivity or that the switch is overloaded with bulk or malicious traffic. Energy Efficient All of the DGS-1510 Series switches are capable of conserving power without sacrificing operational performance or functionality thanks to D-Link Green 3.0 technology. Using the IEEE 802.3az Energy Efficient Ethernet (EEE) standard, the switches will automatically decrease power usage when traffic is low. For environments that do not fully support this standard, these switches offer advanced power-saving settings including port shut-off, LED shut-off, and system hibernation based on custom profiles. These profiles can also be applied to the PoE switches so that there is no unnecessary power consumption during off-hours.

High Speed Ethernet Adaptor Cliptec CLiPtec OCB480 is a Hi-Speed Ethernet Adapter specifically designed to plug into an available Universal Serial Bus (USB) port on a Ultrabook laptop or PC. The OCB480 extends the transfer speed of earlier USB Fast Ethernet adapters to true 10/100Mbps connectivity. CLiPtec OCB480 USB 2.0 Hi-Speed Ethernet Adapter provides a standard LAN port RJ-45 for a quick and simple method of connecting to an Ethernet 10Mbps or Fast Ethernet 100Mbps based LAN via a network hub or switch. The built-in USB 2.0 cable connects directly to your computer or laptop. Features | Switch 10Mbps or 100Mbps network automatically. Full-duplex and Half-duplex 10/100Mbps operation. Support Full Duplex Flow Control (IEEE 802.3x). Supports suspend/resume detection logic. Support 10Mbps and 100Mbps N-way auto-negotiation operation. Integrated Fast Ethernet MAC, physical clip and transceiver in one chip. Powered by USB port, No external power adapter required. Compact design is ideal for on the go professionals.

Mikrotik CRS112-8G-4S-IN 8 port Gigabit Cloud Router Switch 4xSFP Cloud Router Switch 112-8G-4S-IN is a “small size low cost” member of CRS series. It comes with eight Gigabit Ethernet ports and four SFP cages CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes. Size of RAM: 128 MB

Mikrotik BaseBox 5 RB912UAG-5HPnD-OUT in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit. MikroTik RouterOS, Level4 license (supports wireless AP mode) Built in 5GHz 802.11a/n,2x RP-SMA connectors

L2, Unmanaged, 24 100M PoE port, 2 1000M combo port, 802.3af/at, PoE power budget 370W

CAT6 Snagless 3ft Moulded Patch Cable Blue Tripp-Lite

• Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 16MB Flash • Networking Interface: 1 x 10/100/1000 Ethernet Port • Power Supply: 24V, 0.5A PoE • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Supported Voltage Range: 20-26VDC • Max. Power Consumption: 8.5W • Gain: 25dBi • Operating Frequency: 5170-5875MHz • Wind Loading: 210 N @ 200 km/h (47 lbf @ 125 mph) • Wind Survivability: 200 km/h (125 mph) • LEDs (1) Power, (1) LAN, (4) WLAN • Channel Sizes: PtP Mode: 10/20/30/40/50/60/80MHz; PtMP Mode: 10/20/30/40MHz • Polarization: Dual Linear • Enclosure: Outdoor UV Stabilized Plastic • Operating Temperature -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% Non-Condensing

SmartRack Energy-Saving, Row-Based Server Rack Cooling Unit - price shown BTU, 200-240V, Hardwire Input

Description Mercusys MW305R wireless n router Mercusys mw305r router offers wireless speeds of up 300Mbps. It is therefore ideal for HD streaming, online gaming, and large file downloads e.t.c Three 5dBi antennas greatly increase wireless signal strength, size and stability Intuitive webpage guides you through the setup process in minutes Specification Category Routers , Networking Brand Specification Wireless Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Frequency: 2.4 - 2.4835GHz Signal Rate: 11n: Up to 300Mbps (Dynamic), 11g: Up to 54Mbps (Dynamic), 11b: Up to 11Mbps (Dynamic) Reception Sensitivity: 270M: -70dBm@10% PER, 130M: -74dBm@10% PER, 108M: -74dBm@10% PER, 54M: -77dBm@10% PER, 11M: -87dBm@8% PER, 6M: -90dBm@10% PER, 1M: -98dBm@8% PER Wireless Security: 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK Wireless Functions: WDS bridge WAN Type: Dynamic IP/Static IP/PPPoE/L2TP/PPTP Management: Parental Control, Access control, Local management, Remote management DHCP: Server Port Forwarding: Virtual server, UPnP, DMZ Dynamic DNS: DynDNS、NO-IP Firewall Security: IP and MAC address binding Protocols: IPv4 Guest Network: 2.4GHz guest network Button: Reset/WPS button Antenna Type: 3 x 5dBi fixed omni directional antennas Package Contents: 300Mbps Wireless N Router, MW305R, Power adapter, Quick installation guide, Ethernet cable Dimensions (W X D X H): 169 x 116 x 35 mm

TRIPP-LITE 4-Port 1U Rack-Mount Cat5e 110 Patch Panel, 568B, RJ45 Ethernet, TAA Tripp Lite's Enhanced Category 5 Patch Panels offer you all the functionality and compatibility as any name brand. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Cat5e connecting hardware specifications. Color coded for both EIA/TIA 568A & 568B installations. 24 ports ensure a wide range of plug-n-play options. The clear numbering on both the front and back of each panel gives you a quick and easy way to identify cable runs and the high density 19in panel design will save you valuable space in on the rack. UTP Cat5e 22-24 AWG solid cable Features Cat5e UL approved Ports clearly numbered both on front and back Labels on front enable each port to be named Color coded label on back offers both EIA/TIA 568A & 568B wiring Metal frame EIA/TIA 2/32 spacing Rack mountable on a 19 rack (1U of space) Specifications OVERVIEW UPC Code 010-100-110194 Technology Cat5/5e PHYSICAL Shipping Dimensions (hwd / cm) 5.59 x 52.07 x Businessclaud.com shownipping Weight (kg) 0.59 CONNECTIONS Ports 24 Side A - Connector 1 110 IDC Side B - Connector 1 RJ45 (FEMALE) PoE Type Type 2 PoE+ (30W, IEEE 802.3at) WARRANTY Product Warranty Period (Worldwide) Lifetime limited warranty

8 Port Poe Switch 8 Port Rj45; 8 Port Poe; Poe Protocol: Ieee802.3af/At; Port Speed: 10/100m, With Power Adaptor

8 Gigabit electric ports 2 Gigabit optical ports 2 USB ports and 1 Console port 500 recommended concurrent clients High performance, “All-in-One” cloud managed security router. All-in-one firewall + network behavior audit + IPS + AC = NBR. Open API, freely third party Integration Accurate screen mirroring, one-to-one guest room screen mirroring. L7 DPI and intelligent flow control in VPN tunnels. Integrated wireless AC, free to use.

SmartRack Roof-Mounted Cable Trough - Provides cable routing and power/data cable segregation Features Safely routes cables across the top of an enclosure When cabinets are lined in a row, these trays create a dedicated path for cables Helps eliminate cable stress Organizes cables outside of SmartRack enclosure Toolless mounting on the SmartRack enclosure's top panel Grounding stud provided to allow tie-in to the enclosure and facility ground

Ubiquiti Part Number AMO-2G10 2.4GHz AirMax Omni (Not For Use With 5GHz) 10dBi, Rocket Kit Wind Survivability to 125mph