Computer networks

24 Port fiber tray With SC simplex adapters, /SC 24 Port (Core) Simplex Plate/ Multi mode with 24 Beige SC Adapters Loaded 24 Port SC Single Mode Patch Panel Kits, Ready

The D-Link DWR-711 Wireless N300 3G Router is a cost efficient solution that allows users to access mobile broadband networks. Once connected, users can transfer data, stream media, and send SMS messages. Simply insert your HSPA+ SIM card and share your 3G Internet connection through a secure wireless network or by using any of the three 10/100 Ethernet ports. Connect to your HSPA+ mobile connection with fast downlink speeds of up to 21 Mbps and uplink speeds up to 5.76 Mbps, which gives you the speed you need for fast, responsive Internet access. Surf the web with ease, and stream music and video over the Internet to your PCs and mobile devices. The DWR-711 utilizes dual active firewalls (SPI and NAT) to prevent potential attacks over the Internet. WPA/WPA2 wireless encryption keeps your wireless network secure and your traffic safe, allowing you to share your 3G connection without worrying about unauthorized users accessing your network. The Wireless N300 3G Router can be installed quickly and easily almost anywhere. It can be configured through almost any web browser without the need for special software. This router makes it stay connected even when conventional broadband services are unavailable.

Material: PVC Size: 1" x1" (25mm by 25mm) Standard: 2.5m length

The Cisco Catalyst 3850-48F-S Switch provides capabilities that ideally suited to support the convergence of wired and wireless access. The new Cisco Unified Access Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility, and application optimization. This convergence is built on the resilience of the new and improved Cisco StackWise-480 technology. The Cisco Catalyst 3850-48F-S Switch supports full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power Over Ethernet (Cisco UPOE), modular and field-replaceable network modules, RJ-45 and fiber-based downlink interfaces, and redundant fans and power supplies. Product Overview ● Integrated wireless controller capability with support for up to 100 access points and 2000 wireless clients on each switching entity (switch or stack) ● 48 10/100/1000 Ethernet PoE+ [800W] ports with Energy-Efficient Ethernet (EEE) ● Cisco StackWise-480 technology provides scalability and resiliency with price showns of stack throughput ● Cisco StackPower technology provides power stacking among stack members for power redundancy ● Full IEEE 802.3at (PoE+) with 30W power on all copper ports in 1 Rack Unit (RU) form factor ● 715WAC power supply 1 RU ● IEEE 802.3bz (2.5/5 G/s BASE-T) to go beyond 1 Gb/s with existing Cat5e and Cat6 ● IEEE 802.1ba AV Bridging (AVB) built-in to provide better AV experience for including improved time synchronization and QoS ● Software support for IPv4 and IPv6 routing, multicast routing, modular Quality of Service (QoS), Flexible NetFlow (FNF), and enhanced security features ● Single universal Cisco IOS Software image across all license levels, providing an easy upgrade path for software features ● Cisco DNA services delivered through Cisco ONE ™ Software, providing simplified, high-value solutions with license portability and flexibility ● Support for AES-256 with the powerful MACSEC 256-bit for SFP+ and Multigigabit models and 128-bit encryption algorithm available on all models ● Enhanced Limited Lifetime Warranty (E-LLW) with Next Business Day (NBD) advance hardware replacement and 90-day access to Cisco Technical Assistance Center (TAC) support

The Light Head Grid (LHG 5) is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna The LHG 5 is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol The LHG 5 grid design ensures protection against wind The fact that the antenna element is built into the wireless unit means no loss on cables

Mikrotik hEX lite (RB750r2) 5x Ethernet port router 850MHz CPU, 64MB RAM, 16 MB storage size, RouterOS L4 Includes 12V 0.5A power adapter Dimensions are 113x89x28mm and Weight without packaging and cables is 129g Perfectly fits into any SOHO environment

STAR BITS: T8H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H Hex key bits: 5/32", 9/64", 1/8", 7/64", 3/32", 5/64" Hex bits: 2, 2. 5, 3, 4, 5, 6mm Spanner bits: 4, 6, 8, 10mm TORQ SET BITS: 6, 8, 10mm 60mm magnetic bit holder Torque screwdriver Set: T10, T15, T20, T25 5 piece socket: 3/16", 1/4", 5/16", 11/32", 3/8"

Ceiling Access Point - RouterBoard cAP AC-US Dual-band 2.4 / 5GHz The cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. Mount on a ceiling or wall Two Gigabit Ethernet ports (one with PoE output)

The Giganet Cabling solution products have been designed and manufactured to top International standards for end-to-end Category 6 UTP installations in both horizontal and backbone areas. The Giganet 4 pair UTP RJ45 patch leads are manufactured from stranded conductor cable and verified to Cat 6 TIA/EIA-568-B.2-1 standards. Available for flexible and cost effective Cat 6 installations. The Giganet Category 6 patch cords when used with high performance Giganet Category 6 connectivity (solid UTP cable, patch panels and work area outlets) provide superior performance capabilities of high bandwidth applications support. Unshielded 4 pair twisted multi-stranded cable Colours: grey, blue, green, red and yellow ½m, 1m, 3m and 5m lengths available from stock Highly flexible Jacket: 0.453mm 75°C PVC Insulation: 0.153mm polyolefin Stranded copper conductor Unshielded 8P8C Plugs Meets all requirements for Gigabit Ethernet ISO/IEC 11801 transmission requirement for stranded wire UL, CSA & ETL verified Tested and verified to TIA/EIA -568-B.2-1 Moulded strain-relief boots 50 micron gold plated RJ45 connector Individually packed in Poly bag Suitable for high density Blade Network equipment

Overview WMPFSE The Panduit® PatchLink® Horizontal Cable Manager manages category 5e and 6 copper, fiber optic and coaxial cables on the front and rear of any standard 19in (483mm) EIA rack or cabinet. Flexible fingers not only provide a safe integral bend radius but simplify adds, moves and changes for an easy-to-maintain finished, professional finish. Front Only Cover, ABS, 1RU, Black, 1pc, Black. Specifications Product Type Single Sided Manager Body Material ABS Orientation Horizontal Cover Material PVC D-Ring Material NA Finger Material ABS Overall Height (In.) 1.7 Overall Height (mm) 44.1 Overall Width (In.) 19 Overall Width (mm) 483 Overall Depth (In.) 3.7 Overall Depth (mm) 93.7 Number of Rack Units 1 Sub Brand PatchLink Color Black Standards Met RoHS For Use With NA Includes Manager, cover, hardware kit Number of Rack Spaces 1 Material ABS CE Compliant NA CE Marking NA Compatibility NA D-Ring Size NA Read more below Single Sided Manager

Type a description for this product here...

Buy the Businessclaud Ubiquiti UniFi UAP-AC-M AC Mesh Wide-Area Indoor/Outdoor Access Point from Businessclaud for genuine quality and reliable products. We provide authentic products with full warranty, fast nationwide delivery, and dedicated customer support.

Overview The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Based on the IEEE 802.3ab and 802.3z standards, the DMC-700SC is designed for use with multi-mode fiber cable utilising the SC-Type connector. The DMC-700SC supports shortwave (SX) laser specifications at a full wire-speed forwarding rate. Other features of this module include the ability to be used as a standalone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The DMC-700SC will transmit at extended fiber optic distances utilising multimode fiber up to 550 meters. Technical Specifications LED Indicators Power (PWR) LINK/ACT Dimensions 120 x 88 x 25 mm Power Input 7.5V 1.5A Through external AC power adapter Operating Temperature 0° - 40° C Storage Temperature -25° - 70° C Humidity 10 ~ 90% non-condensing Emission (EMI) FCC Class B VCCI Class B CE Class B C-Tick

OVERVIEW 10/100Mbps Multi-Mode Media Converter Complies with 802.3u 10/100Base-TX, 100Base-FX standards Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends fiber distance up to 1.2 miles (2km) What This Product Does The MC100CM is a media converter designed to connect 100BASE-FX fiber to 100Base-TX copper and vice versa. Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed using multi-mode fiber cable with an SC-Type terminal for physical connections. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode for flexibility. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 1.2 miles (2km). TECHNICAL SPECIFICATIONS Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 1.2 miles (2km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Multi-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 16MB Flash • Networking Interface: 1 x 10/100/1000 Ethernet Port • Power Supply: 24V, 0.5A PoE • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Supported Voltage Range: 20-26VDC • Max. Power Consumption: 5.5W • Gain: 22dBi • Operating Frequency: 5150-5250 MHz*, 5250-5350 Mhz*, 5470-5725 Mhz*, 5725-5850 Mhz* ( *Some frequencies may require activation; visit: here ) • Wind Loading: 210 N @ 200 km/h (47 lbf @ 125 mph) • Wind Survivability: 200 km/h (125 mph) • LEDs (1) Power, (1) LAN, (4) WLAN • Channel Sizes: PtP Mode: 10/20/30/40/50/60/80MHz; PtMP Mode: 10/20/30/40MHz • Polarization: Dual Linear • Enclosure: Outdoor UV Stabilized Plastic • Operating Temperature -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% Non-Condensing

Height 6U Width 450mm Depth 600mm Colour RAL6089/RAL7035 Loading Capacity Static Loading 1000KG Doors Perforated or glass front door/ Perforated steel rear door 800mm include bifold rear doors. Side Panels Steel side panels with release handles and locks Top Panels 2 & 4 fan tray – Cabinets with glass doors only, multiple entry knockouts Mounting Rails Front & Rear mounting rails

D-Link solid cables are the best twisted-pair cables in the market for transmitting data over local area Networks (LANs). These cables exceed performance requirements specified by the TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standards. • 4 Pairs Unshielded Twisted Pair (UTP) Cable • Conductor Metal: Bare Copper • Color Code: Gray • Conductor: 24 AWG • Insulation Material: HD-PE • Jacket Material: PVC UL94V-0 • Heat-resistant: 60oC minimum (Temperature limited)

Advanced Switching Technology for the Masses. Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. Features: (24) Gigabit RJ45 Ports (2) SFP Ports (1) Serial Console Port Non-Blocking Throughput: price showns Switching Capacity: price showns Forwarding Rate: 38.69 Mpps Maximum Power Consumption: 25W Rack- or Wall-Mountable DC Input Option (Redundant or Stand-Alone

Powerful, yet Cost-Efficient The D-Link DGS-1210 Series Smart Managed Switches are the latest generation of switches to provide increased Power over Ethernet (PoE) output, a range of physical interface types, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1210 Series provides a cost-efficient and flexible solution for expanding any business network. The DGS-1210 Series switches support 8, 24, or 48 10/100/1000BASE-T ports. Each switch also supports an additional 2 or 4 Gigabit SFP ports for optical connections using multimode or singlemode SFP transceivers. PoE Support Five of the nine models in the DGS-1210 series family support Power-over-Ethernet capabilities, simplifying deployments with IP cameras, VoIP phones, wireless access points, and other powered devices. These models include the DGS-1210-10P, DGS-1210-10MP, DGS-1210-28P, DGS-1210-28MP and DGS-1210-52MP. Using the switch’s management interface, an administrator can control various PoE functions, such as remotely rebooting cameras or access points, from anywhere on the network, including over the Internet. They also support time-based PoE, which allows administrators to set a time window that determines when each port’s PoE power is turned on and off. All PoE models support the IEEE 802.3af and 802.3at standards, and each PoE power budget varies per model. Automatic Configuration The DGS-1210 Series supports Auto Voice VLAN and Surveillance Mode, which allow voice and video traffic to be automatically identified and handled differently to regular network traffic. Auto Voice VLAN detects Voice over IP (VoIP) traffic and automatically segments it from the rest of the network, increasing security and allowing Quality of Service (QoS) to be applied. Surveillance Mode detects compatible ONVIF cameras and places them in a surveillance VLAN, allowing a single switch to be used for voice, video, and data, removing the need for dedicated hardware and reducing maintenance costs. Surveillance Mode also includes its own Web UI, making surveillance features easily accessible and simplifying management of your surveillance network. Extensive Management and Layer 2 Features The DGS-1210 Series comes equipped with a complete lineup of L2 features, including IGMP snooping, port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers. The Series also supports advanced features such as static routing, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. And, because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. Comprehensive Security Features to Protect Your Network D-Link’s innovative Safeguard Engine protects switches against traffic flooding and virus attacks. 802.11X port-based authentication allows the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network.

Junction box PVC

Part Number: GLC-LH-SM Device Type: Cisco SFP LX Package: SFP Data Rate: 1.25/Businessclaud.com showns Wavelength: 1310nm Distance/Power Budget: 10km Optical Components LD: FP PD: PIN Output Power: -9.5~-3dBm Receiver Sensitivity: -20dBm Power Supply Voltage: 3.3V Connector: Dual LC Fiber Type: SMF Operating Temperature: 0~70 °C DDMI: Without Application: Gigabit Ethernet Compatiblity: 100% Cisco Compatible

Brand: Aico

Mikrotik RB2011iL-RM 1U rackmount, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. The RB2011iL-RM includes a new feature - power injector on Ethernet port 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports. RouterBOARD 2011iL-RM comes with 1U rackmount enclosure and power supply. Specifications Details Product code RB2011iL-RM Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Dimensions 443 x 92 x 44 mm RouterOS license 4 Operating System RouterOS Size of RAM 64 MB Storage size 128 MB Storage type NAND Tested ambient temperature -40°C to 60°C MTBF Approximately 100'000 hours at 25C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 8-30 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V Max power consumption 18 W Max power consumption without attachments 6 W FAN count Passive PoE-out Details PoE-out ports Ether10 PoE out Passive PoE Max out per port output (input 30 V) 510 mA Max total out (A) 510 mA Ethernet Details 10/100 Ethernet ports 5 10/100/1000 Ethernet ports 5 Certification & Approvals Details Certification CE, EAC, ROHS

TP-Link CPE 5GHz 300Mbps 13dBi Outdoor CPE - TL-CP510 Built-in 13dBi 2x2 dual-polarized directional MIMO antenna Adjustable transmission power from 0 to 23dBm/200mw System-level optimizations for more than 15km long range wireless transmission TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications Centralized Management System – Pharos Control AP / Client / AP Router / AP Client Router (WISP) operation modes Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

Overview Fast LTE CAT4 connections of up to 150Mbps Supports all Sim Cards i.e Faiba 4G (JTL), Telkom 4G, Airtel 4G, Safaricom 4g Ethernet connections are no longer bottlenecks. The HUAWEI LTE CPE B310 delivers maximum speeds of LTE CAT4 150Mbps through its Gigabit Ethernet port. Strong Wi-Fi coverage Enjoy smoother wireless network connections with the HUAWEI LTE CPE B310’s robust Wi-Fi coverage that eliminates dead corners. Total control over system upgrades Even after a successful upgrade, you can easily restore software to the previous version. Simply hold the WPS and Power buttons for a seamless rollback. Technical Specifications Size: Width:126.0 mm , Height:181.0 mm , Depth:70.0 mm ,Weight:About 226 g Form : LTE Router Communication System : LTE/UMTS/GSM Speed : 150Mbps DL/ 50Mbps UL Display : NA Battery : NA microSD card slot : NA External Antenna Interface : 2*SMA Receive Diversity : Yes Wi-Fi Protocol : 802.11b/g/n Wi-Fi Connection Number : 32 Operation System : NA

Tool Side Cutter

Brand: D-Link

D-Link DBA-2820P/UDL Wireless AC2600 Wave2 Business Nuclias Cloud Access Point

OVERVIEW These converters convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet multi-mode fiber signals. Maximum fiber cable distance is 2km . 1 RJ-45 twisted-pair port and 1 fiber port are provided. - DMC-300SC: the fiber port on this media converter is the SC connector TECHNICAL SPECIFICATIONS Interface Number of Ports • 1 x 10/100BASE-TX RJ-45 port • 1 x 10/100BASE-FX SC port Standards • IEEE 802.3 for 10BASE-T/F • EEE 802.3u for 100BASE-TX/FX Data Transfer Rate • Ethernet: 10 Mbps/20 Mbps (halfduplex/full-duplex) • Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode • Half-duplex/full-duplex Media Types • 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) • 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) • 100BASE-FX: Multi-mode fiber optic cable with SC connector (up to 2 km) Media Exchange Interface • Auto-MDI/MDIX Functionality Transmission Mode • Store-and-forward Forwarding Rate • Full wire-speed forwarding rate Management • Through the DMC-1000 chassis with the DMC-1002 management module installed Management Functions • Fiber port duplex mode Physical Diagnostic LEDs • Power • Speed (for twisted pair ports) • Full-duplex/Collision (for twisted pair and fiber ports) • LINK/ACT (for twisted pair ports) AC Input • 5 V/1 A external power adapter Temperature • Operating: 0 °C to 40 °C (32 °F to 104 °F) • Storage: -25 °C to 70 °C (13 ºF to 158 °F) Humidity • 10% to 90% RH, non-condensing Dimensions • 120 x 88 x 25 mm (4.72 x 3.46 x 0.98 in) Weight • 291 g (0.64 lbs) Fiber Wavelength • 1310 nm Supported Fiber Cable Length • Up to 2 km Emission Certifications (EMI) • FCC Class A • VCCI Class A • CE Class A

Overview S6212B Net-Access™ S-Type Cabinet frame with top panel. Single hinge perforated front door. Split perforated rear doors open in the middle to minimize door swing footprint. Solid side panels (2), casters, POU brackets (1 set), cage nut rails (2 sets). Dimensions: 79.8in H x 23.6in W x 42.0in D (2026mm x 600mm x 1070mm). Color: Black Specifications Sub Brand Net-Access™ Product Type S-Type Cabinet Rear Door Type Split Perforated Front Door Type Single Hinge Perforated Material Steel Color Black Overall Width (In.) 23.54 Overall Width (mm) 598 Overall Depth (In.) 43.89 Overall Depth (mm) 1115 Overall Height (In.) 79.76 Overall Height (mm) 2026 Number of Rack Units 42 Casters Yes Static Load Capacity (Kg) 1360 Static Load Capacity (lb) 3000 Rolling Load Capacity (Kg) 1133 Rolling Load Capacity (lb) 2497.83 Finish/Coating Powder-Coated Standards Met RoHS Compliant, EIA-310-E, TIA/EIA-942, UL2416 Cable Management None Package Type Fully Assembled Rails Cage Nut Side Panels Yes UL Listed UL 2416 Read more

-Connector: SC/UPC -Length: 1.5m

Keep your whole home connected with strong Wi-Fi expansion at combined speed of up to Businessclaud.com showns Integrated power socket makes sure that no power outlet is waste Intelligent signal light helps to fi­nd the best location for optimal Wi-Fi coverage by showing the signal strength Works with any Wi-Fi router or wireless access point

Overview Connect to a Wireless Network The D-Link DAP-1360 Wireless N Access Point connects to a broadband modem enabling you to wirelessly share your Internet connection. It is a 802.11n compliant device that delivers up to 14x faster speeds 1 and 6x farther range 1 than 802.11g while retaining backward compatibility with 802.11g and 802.11b devices. Enjoy surfing the web, checking e-mail, and chatting with family and friends online at faster speeds on your wireless network. Protect Your Wireless Network & Data The DAP-1360 provides 64/128-bit WEP encryption and WPA/WPA2 security to protect your network and wireless data. This device also supports Wi-Fi Protected Setup (WPS) to quickly and securely setup a wireless network. In addition, the access point features m AC address filtering and a disable SSID broadcast function to limit outsiders’ access to your home and office network. Configure Your AP for Different Applications The DAP-1360 can be configured to operate in seven different modes as needed. The Access Point mode allows the device to act as a central hub for wireless users. The Wireless Client mode is available to enable the DAP-1360 to connect to another access point. There is a Bridge mode to join two wired networks (LANs) together and a Bridge with AP mode so the device can act as a wireless hub and a bridge at the same time. The Repeater mode extends wireless coverage to cover all “dead” spots. A WISP Client Router mode allows wireless Internet service subscribers to share Internet connection with home/office Ethernet-enabled computers without the need for an extra Businessclaud.com, the device can act as a WISP Repeater to let WISP subscribers share their Internet connection with wired and wireless computers without any extra routers. Install Your AP Quickily & Easily With the D-Link Setup Wizard, you can set up your wireless network in minutes. It configures your DAP-1360’s operating mode and makes it easy to add new wireless devices to the network. Create a simple wireless network for your home and office quickly and easily with the DAP-1360. Technical Specifications NETWORK STANDARDS 802.11n wireless LAN 802.11g wireless LAN 802.11b wireless LAN 802.3/802.3u 10BASE-T/100BASE-TX Ethernet ANSI/IEEE 802.3 NWay auto-negotiation DEVICE INTERFACES 802.11g/n wireless LAN One 10/100BASE-TX Ethernet LAN port OPERATING FREQUENCY 2.4 to 2.4835ghz OPERATING MODES Access Point Wireless Client Bridge Bridge with AP Repeater WISP Client Router WISP Repeater SECURITY 64/128-bit WEP data encryption WPA-PSK, WPA2-PSK WPA-EAP, WPA2-EAP TKIP, AES MAC address filtering SSID broadcast disable function WPS (Wi-fi Protected Setup) DEVICE MANAGEMENT Web-based management through Microsoft Internet Explorer 6 or higher,firefox 1.5 or higher, or other Java-enabled browser DIAGNOSTIC LEDS Power Wireless Security LAN POWER INPUT 5V DC/1.2 A external power adapter DIMENSIONS (WxDxH ) 147.5 x 113 x 31.5 mm(5.81 x 4.45 x 1.24 inches) CERTIFICATIONS FCC Class B CE Wi-fi b/g/n

Model: Tray 6842U

Brand: TP-Link

8 10/100Mbps auto-negotiation RJ45 ports, supports auto MDI/MDIX Green Ethernet technology saves the power up to 60% IEEE 802.3x flow control provides reliable data transfer Plastic case, desktop design Plug and play, no configuration required

Features microUSB for a 3G/4G modem, or for power input. CPU: Atheros AR9331 300MHz Memory: 64MB DDR SDRAM Ethernet: 2x 10/100 Mbit/s Fast Ethernet ports OS: MikroTik RouterOS, Level4 license

Terminating stranded and solid wire cables Terminating RJ11, RJ12 Telecoms Style Plugs Terminating RJ45 Data Communications Plugs

D-Link DBA-3621P/UDL Wireless AC1300 Wave2 Business Nuclias Cloud Outdoor Access Point Part Number: DBA-3621P/UDL Centralized cloud-based management, with intuitive web and app-based interface Dual-band wireless speeds offer a formidable 1267 Mbps throughput Slice through congestion with better handling of multiple connections thanks to IEEE 802.11ac Wave 2 wireless 2 x 2 MU-MIMO Antenna with two spatial streams handles simultaneous connections more efficiently Supports WPA3™ - the latest WiFi security for more protection Band Steering pushes 5 GHz capable devices onto the faster band Beamforming tracks devices, giving better connectivity while on the move Create a secure guest network with social login amongst other authentication options Supports Power over Ethernet for simpler installation with less cable clutter With Zero Touch Deployment, deployment is flexible and fast: get online in no time IP67-rated water-resistant and dust-resistant housing Delivers powerful Wi-Fi, even in extreme temperatures (-40 to 50°C ) Product Datasheet

24-port 10/100/1000Base-T Unmanaged Green Desktop Gigabit Switch (UK Plug) Number of Ports Twenty-four 10/100/1000 Gigabit ports Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet ANSI/IEEE 802.3 NWay auto-negotiation IEEE 802.3x Flow Control Data Tranfer Rates Ethernet: 10 Mbps (half duplex) 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex) 200 Mbps (full duplex) Gigabit Ethernet: 2000 Mbps (full duplex) Network Cables 10BASE-T: UTP CAT 3, 4, 5/5e (100 m max) EIA/TIA-586 100-ohm STP (100 m max) 100BASE-TX, 1000BASE-T: UTP CAT 5/5e (100 m max) EIA/TIA-568 100-ohm STP (100 m max) Functionality D-Link Green Features IEEE 802.3az Energy Efficient Ethernet (EEE) Link status detection power saving Cable length detection power saving RoHS Compliance Media Interface Exchange Auto MDI/MDIX Transmission Method Store-and-Forward switching method MAC Address Table 8K MAC addresses RAM Buffer 512 KBytes RAM for data buffering Jumbo Frames 9216 Bytes 9600 Bytes Switching Capacity price showns price showns Port Packet Filtering 10M: price shown pps 100M: price shown pps 1000M: price shown pps Physical LEDs Power LED 16 Link/Activity/Speed LEDs (one per port) Power LED 24 Link/Activity/Speed LEDs (one per port) Power Inputs 100 to 240V AC Input Power Consumption Standby: 4.48 watts Maximum: 9.84 watts Standby: 6.5 watts Maximum: 13.5 watts Heat Dissipation Standby: 15.2768 btU/h Maximum: 33.5544 btU/h Standby: 22.165 btU/h Maximum: 44.035 btU/h MTBF price shown hours price shown hours Dimensions 11.02 x 4.92 x 1.73 inches (280 x 125 x 44 mm) 11.02 x 7.09 x 1.73 inches (280 x 180 x 44 mm) Weight 2.34 lbs (1.06 kg) 3.66 lbs (1.66 kg) Operating Temperature 32 to 104 °F (0 to 40 °C) Storage Temperature 14 to 158 °F (-10 to 70 °C) Humidity 5% to 90% non-condensing Certifications FCC Class A ICES-003 Class A CE Class A C-Tick Class A CB cUL

Network faceplate is a kind of cabling accessories, which applies to the cabling sub-system in network, and it is suitable for installing multi-type modules. Its main function is to fix the module and protect the cable at the data interface, which acts as a shield. In all network system, faceplate is not a key-feature accessory, but it is one of surface accessories, it plays a role of good-looking and connection in the overall cabling effect. The material of faceplate is generally ABS/PC, as well as metal in some condition. The external dimensions of the faceplate conform to the international standard 86*86MM. The embedded faceplate is easy to install and easy to identify data and voice port with embedded chart and label position on surface. The faceplate is dust-proof by shutter to protect the module from dust and dirt when it is not used. Faceplate is suitable for multi-type both Rj45 and Rj11 module installation, flexible for the workspace subsystem. There is a transparent presentation board inside a blank card on the above of exit port. Bolein faceplate fearures: Made from high-impact ABS for long years use; Perfectly blends into the decor of your home or office; Protect and hide your network connection; Accept all keystone jack inserts; Standard 110 type IDC termination;

Description The GWN7615 include support for advanced QoS, low-latency real-time applications, mesh networks , captive portals, 200+ concurrent clients per AP and dual Gigabit network ports with PoE/PoE+, the GWN7615 can be us ed to create a scalable solution as big or small as needed for the deployment scenario, from office buildings to reta il locations, hotels and Businessclaud.com ensure easy installation and management, the GWN7615 uses a controller-less distributed network management design in which the controller is embedded within the product’s web user interface. The GWN7615 is also supported by Businessclaud.com and GWN Manager, Grandstream’s cloud and on-premise Wi-Fi management platforms. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments and offers a seamless connection with Grandstream’s Wi-Fi-capable IP phones. Features Businessclaud.com showns aggregate wireless throughput and 2x Gigabit wireline ports Dual-band 3x3:3 MU-MIMO technology Self power adaptation upon auto detection of PoE or PoE+ Support 200+ concurrent Wi-Fi client devices Up to 175-meter coverage range Advanced QoS to ensure real-time performance of low-latency applications Anti-hacking secure boot and critical data/control lockdown via digital signatures, unique security certificate/random default password per device Embedded controller can manage up to 50 local GWN series APs; Businessclaud.com offers unlimited AP management; GWN Manager offers premisebased software controller Gigabit 3x3: MIMO Technology PoE Supports Most Devices 175 Meter range Advanced QoS Encryption security Built-in Provisioning/Management Controller

4 Port Fast Ethernet Unmanaged POE Switch Intelligent PoE Management. When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime. Up to 300 m Long Range PoE Transmission. The distance between IPCs and switches can reach maximum of 300 meters. 4/8-Core Adaptive Power Supply with Less Power Loss. 8-core power supply reduces the power loss on cables. 6KV Surge Protection to Improve Reliability in Harsh Environment. The built-in surge protection device protects the switch from the sudden lightning surge in a harsh environment. Design for Video Transmission. VIP port ensures important data transmission when network congestion occurs. The Hikvision HIK-3E0105P-E is an unmanaged switch that requires no configuration and has 4 10/100Mbps PoE (Power over Ethernet) ports and 1 100Mbps port for uplink. It can automatically detect and supply power to all IEEE 802.3af/at compliant powered devices. With its Extended Transmission mode feature, this switch can extend PoE range from 100m to 250m by decreasing the throughput to 10Mbps. HIK-3E0105P-E Datasheet User Manual of DS-3E0105P-E Layer 2 unmanaged PoE switch 4x 10/100Mbps Ethernet ports 1x 100Mbps uplink IEEE 802.3af or 802.3at PoE standard 802.3af or 802.3at 132 mm x 93.3 mm x 27.6 mm Power: 51 VDC, 35 Watts max (PSU included) Operating Temperature: 0 – 40C

Buy the Businessclaud D-Link DMC-1002 SNMP Module for DMC-1000 from Businessclaud for genuine quality and reliable products. We provide authentic products with full warranty, fast nationwide delivery, and dedicated customer support.

Overview WS-C2960S-48FPD-L is one of the Cisco Catalyst 2960-S Switches, which are the leading Layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. The Catalyst 2960-S Series Switches include new FlexStack switch stacking capability with 1 and 10 Gigabit connectivity, and Power over Ethernet Plus (PoE+) with the Cisco Catalyst 2960 Series Switches offering Fast Ethernet access connectivity and PoE capabilities. The Cisco Catalyst 2960-S are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership Technical Specifications General Information Device Type: Switch - 48 ports - Managed Enclosure Type : Rack-mountable - 1U Ports : 48 x 10/100/1000 + 2 x 10 Gigabit SFP+ Power Over Ethernet (PoE) : Yes Performance : Switching capacity : price showns, Forwarding performance (64-byte packet size) : 101.2 Mpps MAC Address Table Size: 8K entries Remote Management Protocol : SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Encryption : Algorithm SSL Authentication Method : Secure Shell (SSH), RADIUS, TACACS+ Features : Layer 2 switching, auto-sensing per device, dynamic IP address assignment , power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at RAM: 128 MB Flash Memory: 64 MB Flash Status Indicators : Port status, link activity, port transmission speed, port duplex mode, power, system Interfaces: 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 - PoE USB : 1 x 4 pin USB Type A 1 x console - mini-USB Type B - management 1 x console - RJ-45 - management 1 x 10Base-T/100Base-TX-RJ-45-management 2x SFP+ Power Device: Power supply - internal Voltage Required: AC 120/230 V ( 50/60 Hz ) Power Consumption Operational : 81 Watt Width : 17.5 in (44.5 cm) Depth: 15.2 in (38.6 cm) Height : 1.8 in (4.5 cm) Weight : 13 lb (5.9 Kg) MTBF : price shown hour(s) Compliant Standards : TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A

Features:

• Fully manageable L3 switch with full wire speed switching • Ports configurable as a switch, or for routing • Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to Internet • RouterOS gateway/firewall/VPN router • Built in 802.11b/g/n Wireless AP 1000mW • Desktop case • Color touchscreen LCD Product Specifications • CPU: Qualcomm Atheros AR9344 600 MHz • Memory: 128MB • Ethernet: 8x 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X • Storage: 128MB Onboard NAND with multiple OS partition support • Serial Port: One RJ45 serial port • Extras: Reset switch; beeper; voltage and temperature monitoring, touchscreen LCD • Power Options: 8-57V, 24V 0.8A PSU included, PoE in: 10-57V on Ether1 (802.3af/at or passive PoE) • OS: MikroTik RouterOS v6, Level 5 license, free product lifetime upgrades

8 10/100/1000 Mbps gigabit ethernet ports 2 10/100/1000 Mbps uplink port 120watts available PoE Flow control for protection against data loss Maximum distance of 250m Light protection (6kV) Operating Temperature: 0 to 40 deg C (32 to 104 deg F) Long-Distance Transmission with Surge Protection With high distance connectivity, ideal for surveillance solution. Can be used with cat5e or cat6 Businessclaud.com DGS-F1010P-E features four 10/100BASE-TX ports that support the IEEE 802.3af/at PoE protocol. With total power budget of 120W. Easy Deployment and PoE Convenience The DGS-F1010P-E is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free, and you can easily connect multiple computersprice shownare files, music, and video across your home or small office network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving you a more reliable connection for all of your connected devices. Different Switch working mode The DGS-F1010P-E switch works in 4 operating modes using DIP switch VLAN: Isolating ports each other, restrain network storms effectively and improve network performance EXTEND: Supports 250meters long distance power supply (recommended cat 5 or above) PoE: Automatic detection power of port, power off and restart the device if find PD device crash QoS: Customize application prioritization and increase network sensitivity. For example, video priority, monitoring transmission more smoothly