Computer networks

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

2-Post Rack-Mount Installation Kit of 3U and Larger UPS, Transformer and Battery Pack Components 2POSTRMKITHD is engineered to support the mounting of a single 3U or larger rackmount SmartPro or SmartOnline UPS power module, transformer module or battery pack in a 2 post rack environment. Features 2POSTRMKITHD is engineered to support the mounting of a single 3U or larger rackmount SmartPro or SmartOnline UPS power module, transformer module or battery pack in a 2 post rack environment

SmartRack Roof-Mounted Fan Panel - 6 208/240V high-performance fans; 420 CFM; C14 inlet

EnviroSense Rack Environment Sensor, Temperature, Humidity, Contact-Closure Inputs Features Monitors temperature, humidity and contact-closure inputs. Requires UPS with SNMPWEBCARD, MONITORED PDU or SWITCHED PDU, TAA Compliant Environmental Sensor for use with Tripp Lite SNMPWEBCARD enabled UPS systems, Monitored PDUs and Switched PDUs Reports on the contact closure status of up to four compatible devices (such as smoke detectors, fire alarms and security systems) Simple installation Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

SmartRack Roof-Mounted Cable Trough - Provides cable routing and power/data cable segregation Features Safely routes cables across the top of an enclosure When cabinets are lined in a row, these trays create a dedicated path for cables Helps eliminate cable stress Organizes cables outside of SmartRack enclosure Toolless mounting on the SmartRack enclosure's top panel Grounding stud provided to allow tie-in to the enclosure and facility ground

Tripp Lite's SmartRack SRCAGENUTS is compatible with all square hole rack enclosure cabinets. Square hole hardware kit has 50 each M6 cage nuts and bolts to fasten equipment to square hole rackmount rails. Features SmartRack SRCAGENUTS are compatible with all square hole rack enclosure cabinets Square hole hardware kit has 50 each M6 cage nuts and bolts to fasten equipment to square hole rackmount rails

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

Brand: Tripp Lite

SmartRack 2U Cantilever Fixed Shelf (60 lb / 27 kg capacity; 18-in. / 457 mm depth.) Features Fixed Shelf, 2U Cantilever mount. Required mounting hardware included 2 or 4 post rack compatible 18 inch shelf depth Cantilever shelf supports monitors and other equipment Cold rolled steel with black finish. Use two shelves back to back to create a deep fixed shelf in 2POST racks

Brand: Tripp Lite

SmartRack Standard Sliding Shelf (50 lb/23 kg capacity; 28.3 in/719 mm depth) Features Sliding Shelf mountable rack accessory Designed for 4 post rack mounting 28.3 in. / 72cm shelf depth, supports up to 50 lbs. Extendable shelf accommodates tower units, monitors, and other equipment Cold rolled steel with black finish Required mounting hardware included

The PDUMH15HVAT 2–2.4kW Single-Phase 200–240V Local Metered Automatic Transfer Switch / ATS PDU enables redundant power for network devices with non-redundant power supply configurations. Ideal for data centers and server rooms, it mounts in 1U of space in EIA-standard 19-inch racks and features 10 C13 outlets. Dual 3.6-meter input cords with IEC-320 C14 plugs connect to separate primary and secondary single-phase power sources in a nominal voltage range from 200–240V. Plug lock inserts prevent cords from accidental disconnection. The PDUMH15HVAT constantly evaluates the power quality of both input sources. Dynamic solid-state (TRIAC) automatic transfer switching allows the PDU to switch to the secondary source within 2–5 milliseconds should the primary source fail or become unstable to ensure your connected equipment operates without interruption. Built-in slot supports the optional WEBCARDLX (sold separate), which turn the PDUMH15HVAT into a switched PDU by allowing remote access to the PDU for power monitoring, configuration, outlet control and notifications via web browser, Sprice shown telnet or SNMP. Digital ammeter monitors total output current. LEDs display outlet on/off status and input power status on primary and secondary inputs. Features Primary and Secondary Inputs for Power Redundancy Enables redundant power for network devices with non-redundant power supply configurations Dual 3.6 m input cords with IEC-320 C14 plugs connect to separate primary and secondary single-phase power sources 10 C13 outlets Automatic Transfer Switching Dynamic solid-state (TRIAC) automatic transfer switching Switches to secondary power source if primary source fails or becomes unstable 2–5 ms transfer time ensures uninterrupted operation of connected equipment Built-in processor monitors both sources and prevents switching if secondary source is unavailable or of lower quality than primary source Digital Load Meter Easy-to-read ammeter displays total current used by connected equipment LED Indicators Individual LEDs display outlet on/off status and input power status on primary and secondary inputs Advanced Network Monitoring Options Built-in card slot accommodates SNMPWEBCARD and WEBCARDLX accessories (sold separately) Optional cards create a switched PDU by allowing remote access for power monitoring, configuration, outlet control and notification via web browser, Sprice shown telnet or SNMP Mounts Horizontally in 1U of Rack Space Compatible with EIA-standard 19 in. racks TAA-Compliant Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases Package Includes PDUMH15HVAT TAA-Compliant 2–2.4kW Single-Phase ATS/Local Metered PDU (10) C14 plug lock inserts (2) C13 to C14 power cords, 3.6 m (11.8 ft.) Rack mounting hardware (6) Screws Owner’s manual Specifications OVERVIEW UPC Code 010-100-110100 PDU Type Local Metered; Auto-Transfer Switch INPUT PDU Input Voltage 200; 208; 220; 230; 240 Recommended Electrical Service Two single-phase 10A 200-240V circuits Maximum Input Amps 10 Input Connection Type C14 inlet PDU Plug Type (2) IEC-320 C14 Input Phase Single-Phase Input Cord Details Set of 2 C14 inlets and two included cordsets enable connection to separate PRIMARY and SECONDARY power sources Input Cord Length (m) 3.66 OUTPUT Output Capacity Details 2.4kW (240V), 2.3kW (230V), 2.2kW (220V), 2.08kW (208V), 2.0kW (200V) / 10A total capacity Frequency Compatibility 50 / 60 Hz Output Receptacles (10) C13 Output Nominal Voltage 200-240V Customized Load Management Receptacles Adding supported Network Management Card accessory offers upgrade path to switched PDU (8 C13 outlets are switchable upon upgrade); Network Management Card also can be inserted temporarily as a configuration tool to custom program power-on and power-off C13 outlet sequences with user-specified time delays in response to loss and restoration of primary input USER INTERFACE, ALERTS & CONTROLS Front Panel LCD Display Digital display reports total PDU output current in amps Front Panel LEDs 8 LEDs display power on-off status for each C13 output receptacle, plus 2 additional LEDs to indicate input power status for primary and secondary inputs Switches Toggle switch near digital display enables the setting of "HI" for 220, 230 or 240V nominal applications or "LO" for 200 or 208V applications PHYSICAL Material of Construction Steel Form Factors Supported 1U rackmount Minimum Required Rack Depth (cm) 46.48 PDU Form Factor Horizontal (1U) Shipping Dimensions (hwd / cm) 11.00 x 51.51 x Businessclaud.com shownipping Weight (kg) 7.06 Unit Dimensions (hwd / cm) 4,34 x 44 x 36,7 Unit Weight (kg) 4.68 ENVIRONMENTAL Operating Temperature Range 0C ~ 40C (32F ~ 104F) Storage Temperature Range -30°C to +50°C (-22°F to +122°F) Relative Humidity 5-95% non-condensing Operating Elevation (ft.) 0-price shown Operating Elevation (m) 0-3000 COMMUNICATIONS Network Management Cards SNMPWEBCARD; WEBCARDLX FEATURES & SPECIFICATIONS High Availability PDU Features Auto-Transfer Switching STANDARDS & COMPLIANCE Product Certifications EN 55032; GOST (Russia); EN 62040-2; NOM (Mexico); UL 60950-1 Product Compliance RoHS; CE (Europe); FCC Part 15 Class A (USA) WARRANTY Product Warranty Period (Worldwide) 2-year limited warranty

A cable clip is a device that manages wires and cables and secures them to a fixed point on a surface, like a wall, ceiling or floor. A wide range of cable clips is available to control cables of all sizes and shapes, in almost any number, in both home and industrial applications

Wire Connector With Button (L+N) 16Amps 2 Way They are made to prevent electrical cables from touching anything that can cause a short and to create a secure connection between the cables. Any wiring connections, including those for the installation of electrical holders, light switches, ceiling fans, and lighting fixtures, require them. They are very simple to use because all you have to do is press, insert the naked wire and then release to complete the connection. Specifications: Color: White Amps: 16A Voltage: AC 220 - 240V Material: PVC Warranty: 1 Year

With Button (L+N+E) 16Amps 3 Way Wire They are designed to generate a secure connection between electrical cables and stave off the wires from coming in contact with anything that could cause a short. They are necessary for making any wiring connections, including installation of electrical holders, light switches, ceiling fans and light fixtures. They are also easy to use as you only have to press and insert the naked wire and let go and the connection is complete

It is a device designed to attach and secure the end of an electrical cable to the equipment. A cable gland provides strain-relief and connects the cable for which it is designed

Used in facilitating systematic wiring, it also helps in enhancing aesthetics and clarity, allows faster connections, ads issues related to bunching and taping as well as provides for complete electrical insulation support

Used in facilitating systematic wiring of the floor, it also helps in enhancing aesthetics and clarity, allows faster connections, ads issues related to bunching and taping as well as provides for complete electrical insulation support

Compartment trunking are generally used in commercial or industrial applications, to distribute power and enable power cables to be separated from data cables. The trunking is typically single compartment, which can be segregated into compartments using clip dividing fillets

Compartment Trunkings are generally used in commercial or industrial applications, to distribute power and data cabling around a building. The divider is generally used to divide the trunking into separate compartments

Trunking is used to speed up systematic wiring, improve appearances and clarity, enable quicker connections, prevent bunching and taping problems, and give full support for electrical insulation. Specifications: Colour: White Dimensions: 16mmx16mm Material: PVC Length: 2.9meters Warranty: 1 Year

Adhesive trunking is easy to install and comes with a strong self-adhesive backing; simply peel and stick to a smooth clean surface. Specifications: Colour: White Dimensions: 16mmx 25mmx2900mm Length: 2.9meters Material: PVC Warranty: 1 Year

Compartment trunking are generally used in commercial or industrial applications, to distribute power and enable power cables to be separated from data cables. The trunking is typically single compartment, which can be segregated into compartments using clip dividing fillets

Trunking is used to speed up systematic wiring, improve appearances and clarity, enable quicker connections, prevent bunching and taping problems, and give full support for electrical insulation. Specifications: Colour: White Dimensions: 50mmx50mm Material: PVC Length: 2.9meters Warranty: 1 Year

Trunking is used to speed up systematic wiring, improve appearances and clarity, enable quicker connections, prevent bunching and taping problems, and give full support for electrical insulation. Specifications: Colour: White Dimensions: 50mmx75mm Material: PVC Length: 2.9meters Warranty: 1 Year

70x20mm It is used to make the floor's wiring more orderly, and it also improves aesthetics and clarity, speeds up connections, prevents bunching and taping problems, and offers full support for electrical insulation. Specifications: Colour: Grey Dimensions: Height 70mm x Width 20mm Material: PVC Warranty: 1 Year

This bend offers the best connection possible between two conduit pipes as they circle the bend. It is a neat and expert method of cable management. Specifications: Colour: White Dimensions: 25mm Diameter Material: PVC Warranty: 1 Year

This bend offers the best connection possible between two conduit pipes as they circle the bend. It is a neat and expert method of cable management. Specifications: Colour: White Dimensions: 32mm Diameter Material: PVC Warranty: 1 Year

Couplers are attached using set screws or compression and are used to link runs of the same type of conduit. Non-metallic couplings are attached with solvent cement, whereas threaded couplings are screwed directly onto the pipe. Specifications: Colour: White Dimensions: 20mm Material: PVC Warranty: 1 Year

A coupler is used to connect runs of the same conduit type and is fastened with set screws or compression. While solvent cement is used to affix non-metallic couplings, threaded couplings are screwed directly onto the pipe. Specifications: Colour: White Dimensions: 25mm Material: PVC Warranty: 1 Year

A coupler is used to connect runs of the same conduit type and is fastened with set screws or compression. While solvent cement is used to affix non-metallic couplings, threaded couplings are screwed directly onto the pipe. Specifications: Colour: White Dimensions: 32mm Material: PVC Warranty: 1 Year

A coupler is used to connect runs of the same conduit type and is fastened with set screws or compression. While solvent cement is used to affix non-metallic couplings, threaded couplings are screwed directly onto the pipe. Specifications: Colour: White Dimensions: 38mm Material: PVC Warranty: 1 Year

They are applied to electrical junction boxes or enclosures in damp situations to secure threaded conduits or connectors. Specifications: Colour: White Dimensions: 20mm Material: PVC Warranty: 1 Year