Computer networks

Ubiquiti TOUGHCable Connector with Ground Wire The TOUGHCable Connector is specifically designed for use with TOUGHCable™. It protects against ESD attacks and Ethernet hardware damage, while allowing rapid field deployment without soldering. A pack of 20 pieces

The TOUGHCable Connector is specifically designed for use with TOUGHCable™. It protects against ESD attacks and Ethernet hardware damage, while allowing rapid field deployment without soldering. Pack of a 100 pieces

Overview Breakthrough Design and Performance The powerful airMAX ® RocketDish ™ Antennas feature carrier-class construction and 2x2, dual-polarity performance. Industrial-Strength Construction airMAX ® Antennas are designed with robust mechanical design for outdoor application use. Plug and Play Integration Every airMAX ® Antenna has a built-in Rocket ™ mount, so no tools are needed to install the Rocket BaseStation. Technical Specifications Frequency: 2.4 GHz Gain: 24 dBi

Brand: Ubiquiti

Manufacturer / Product: Ubiquiti Networks / RocketM2 Processor Specs: Atheros MIPS 24KC, 400MHz Memory Information: 64MB SDRAM, 8MB Flash Operating System: AirOS Networking Interface: 1 x 10/100 BASE-TX (Cat. 5, RJ-45) Frequency Band: 2.4 GHz (Standard) WiFi Standards: IEEE 802.11b: 11 Mbps IEEE 802.11g: 54 Mbps IEEE 802.11n: 300M Mbps TX Power: max. 28dBm RX Sensitivity: min. -97dBm TCP/IP Throughput: 150Mbps+ Antenna Connector: 2 x RP-SMA Connector (Waterproof) max. Power Consumption: 6.5 Watt Power Method: Passive Power over Ethernet PoE Injector is included Power Input: 12-24V, 12 Watt Dimensions: 16cm x 8cm x 3cm Weight: 0.5 kg Appliance: In- and Outdoor Operating Temperature: -30°C to +75°C Operating Humidity: 5 to 95% non condensing

Dimensions 650 x 650 x 304 mm (25.6 x 25.6 x 11.97") Weight 9.8 kg (21.61 lb) Frequency Range 4.9 - 5.8 GHz Gain 4.9 GHz: 26 dBi 5 - 5.9 GHz: 30 dBi HPOL Beamwidth 5° (3 dB) VPOL Beamwidth 5° (3 dB) F/B Ratio 34 dB Max. VSWR 1.4:1 Wind Loading 787 N @ 200 km/h (177 lbf @125 mph) Wind Survivability 200 km/h (125 mph) Polarization Dual-Linear Cross-pol Isolation 35 dB Min. ETSI Specification EN 302 326 DN2 Mounting Universal Pole Mount, Rocket Bracket, and Weatherproof RF Connectors Included

Type a description for this product here

The Ubiquiti airMAX Rocket AC Lite 5GHz R5AC-Lite is a Rocket Basestation equipment with 2×2 MIMO, passive 24V PoE, and 802.11ac. Rocket 5AC-Lite has a throughput of up to 500+ Mbps. Featuring proprietary airMAX ac technology, the Rocket 5ac Lite is ideal for deployment in Point-to-Point (PtP) bridging applications requiring maximum performance. Point-to-MultiPoint (PtMP) functionality will be added via a future firmware upgrade. The new ac technology offers improved latency, noise immunity, scalability and significantly increases throughout performance. The Rocket5ac Lite radio can be paired with a RocketDish RD-5G30 antenna to create the endpoint of a high-performance, Point-to-Point (PtP) backhaul. Ubiquiti airMAX Rocket 5AC Lite Features: 5 GHz Frequency Band Gigabit Ethernet Passive Power over Ethernet (PoE) Output Power Plug and Play Integration

Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Improved Noise Immunity: The PowerBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam blocks or spatially filters out noise, so noise immunity is improved. Integrated design: Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Software airOS: is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture which enables hi-performance outdoor multipoint networking. airView: Integrated on all Ubiquiti M products, airView provides Advanced Spectrum Analyzer Functionality: Waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference. airControl: is a powerful and intuitive web based server network management application which allows operators to centrally manage entire networks of Ubiqutii devices. Accessories IsoBeam: The IsoBeam TM is an isolator radome that is available as an optional accessory for the PBE‐M5-620 and other models: airFiber® AF‐5G30‐S45 PowerBeam PBE-5AC-620 RocketDish TM RD-5G30-LW The innovative RF‐choke perimeter of the IsoBeam delivers superior noise immunity in co-location deployments; its perimeter corrugation provides enhanced RF shielding. Precision Alignment Kit: he Precision Alignment Kit is available as an optional accessory for the PBE‐M5‐620. It features 15° of azimuth adjustment and 15° of elevation adjustment to enable extremely accurate aiming for optimal PtP link performance. The Precision Alignment Kit is also compatible with other dish antennas: airFiber AF-5G30-S45 PowerBeam PBE-5AC-620 RocketDish RD-5G30-LW Device Specification Dimensions: 420 x 420 x 275 mm (16.54 x 16.54 x 10.83″) Weight: 1.753 kg (3.87 lb) Power Supply: 24V, 0.5A Gigabit PoE Max. Power Consumption: 8W Operating Frequency: 5150 – 5875 MHz Gain: 25 dBi Networking Interface: (1) 10/100/1000 Ethernet Port Processor Specs: Atheros MIPS 74Kc, 560 MHz Memory: 64 MB DDR2, 8 MB Flash LEDs: (1) Power, (1) LAN, (4) WLAN Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels Max. VSWR: 1.5:1 Channel Sizes: 5/8/10/20/30/40 MHz Polarization: Dual Linear Enclosure: Outdoor UV Stabilized Plastic Mounting: Pole-Mount (Kit Included) Wind Loading: 278.4 N @ 120 km/h (63 lbf @ 75 mph) Wind Survivability: 120 km/h (75 mph) ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV Operating Temperature: -40 to 70° C (-40 to 158° F) Operating Humidity: 5 to 95% Noncondensing Wireless Approvals: FCC, IC, CE RoHS Compliance: Yes Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 Vibration Test: IEC 68-2-6 Temperature Shock Test: IEC 68-2-14 UV Test: IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5

Ubiquiti PowerBeam 5AC 500 (PBE-5AC-500) Overview The Ubiquiti PowerBeam 5AC 500 is a high-performance airMAX® ac Bridge Incorporating a dish reflector design with proprietary airMAX® ac technology, the PowerBeam™ ac is ideal for CPE deployments requiring maximum performance. Key Features -802.11ac Wireless AC: Built on the 5GHz ac standards for improved performance in wireless speeds up to 450mbps. -Plug and Play Installation: The PowerBeam requires no tools for assembly; only a single wrench is required for pole-mounting. -Incredible Antenna Beam Performance: The form factor of the PowerBeam features the highest gain for its size. The PowerBeams excellent beam directivity provides the best performance in high-noise environments. -Advanced Software Technology: Ubiquiti airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. -TDMA airMAX protocol: enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. -Protective Radome: Includes a protective radome to shield the radio from the elements. Dish Reflector Design This Ubiquiti PBE-5AC-500 PowerBeam ac features the “Dish Reflector Design”. This leverages Ubiquiti’s “InnerFeed” technology which integrates the radio into the feedhorn of the antenna, so there is no need for any cable, improving performance by eliminating cable losses. By providing increased performance with its faster processor and innovative mechanical design at a low price shown the Ubiquiti PBE-5AC-500 PowerBeam ac is extremely versatile and cost-effective to deploy. Software airOS airOS is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high-performance, outdoor multi-point networking. -Protocol Support. -Ubiquiti Channelisation. -Spectral Width Adjustment. -ACK Auto-Timing. -AAP Technology. -Multi-Language Support. Utilise airMAX Technology Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This ‘time slot’ method eliminates hidden node collisions and maximises airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class

Brand: Ubiquiti

Integrated radio design Plug-and-Play installation Incredible antenna "Beam" performance Advanced software technology

Ubiquiti Powerbeam AC Gen2 (PBE-5AC-Gen2) Overview Powerful dish reflector design with proprietary airMAX ac chipset and dedicated management Wi-Fi for easy U Mobile app support and fast setup. Excellent beam directivity provides the best performance for PtP or PtMP links located in high-noise environments. -Improved Radio Design -Improved Mounting -Improved Surge Protection -Management WiFi Radio/U-Mobile App -AirOS v8.1 New UI Product Specs ( View Datasheet ) -Frequency: 5 GHz -Throughput: 450+ Mbps -Range: 25+ km -Gain: 25 dBi -Max Power Consumption: 8.5W -Ports: (1) 10/100/1000 Ethernet Port -Dedicated management radio

• Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 16MB Flash • Networking Interface: 1 x 10/100/1000 Ethernet Port • Power Supply: 24V, 0.5A PoE • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Supported Voltage Range: 20-26VDC • Max. Power Consumption: 8.5W • Gain: 25dBi • Operating Frequency: 5170-5875MHz • Wind Loading: 210 N @ 200 km/h (47 lbf @ 125 mph) • Wind Survivability: 200 km/h (125 mph) • LEDs (1) Power, (1) LAN, (4) WLAN • Channel Sizes: PtP Mode: 10/20/30/40/50/60/80MHz; PtMP Mode: 10/20/30/40MHz • Polarization: Dual Linear • Enclosure: Outdoor UV Stabilized Plastic • Operating Temperature -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% Non-Condensing

Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 16MB Flash • Networking Interface: 1 x 10/100/1000 Ethernet Port • Power Supply: 24V, 0.5A PoE • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Supported Voltage Range: 20-26VDC • Max. Power Consumption: 5.5W • Gain: 22dBi • Operating Frequency: 5150-5250 MHz*, 5250-5350 Mhz*, 5470-5725 Mhz*, 5725-5850 Mhz* ( *Some frequencies may require activation; visit: here ) • Wind Loading: 210 N @ 200 km/h (47 lbf @ 125 mph) • Wind Survivability: 200 km/h (125 mph) • LEDs (1) Power, (1) LAN, (4) WLAN • Channel Sizes: PtP Mode: 10/20/30/40/50/60/80MHz; PtMP Mode: 10/20/30/40MHz • Polarization: Dual Linear • Enclosure: Outdoor UV Stabilized Plastic • Operating Temperature -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% Non-Condensing

The Ubiquiti PowerBeam 5AC ISO Gen2 supports up to 450+ Mbps real TCP/IP throughput and features improved surge protection. The integrated isolator design also spatially filters out interference, so the PBE-5AC-ISO-Gen2 delivers improved noise immunity in co-location deployments. Ubiquiti PowerBeam 5AC ISO Gen2 Key Features Frequency 5GHz Throughput 450+ Mbps Range 25+ km Filers out interference to improve noise immunity Protective radome for shielding against weather conditions It also features a rear housing with a metal-plated interior, designed to enhance RF shielding, and an included protective radome, to shield the PowerBeam 5AC ISO Gen2 from harsh weather conditions

The Ubiquiti POE-24-AF5X is a specialized Power over Ethernet (PoE) adapter, designed to seamlessly integrate power and data delivery over a single Ethernet cable. This model is specifically engineered to power Ubiquiti's airFiber X radios and other compatible devices that adhere to the specific power requirements of 24V passive PoE. It's an ideal solution for applications that demand reliable power delivery alongside high-speed data transmissions. Features: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground The POE-24-AF5X delivers a 24V DC output at 1 A, providing a total of 12 watts of power. This adapter is tailored to support devices that are optimized for 24V passive PoE, making it perfectly suited for Ubiquiti’s airFiber X series, which are high-performance backhaul radios designed for long-distance, point-to-point (PtP) bridging and high-capacity, multipoint (PtMP) network configurations. It features a Gigabit Ethernet port to accommodate high-speed data requirements, ensuring that the network's performance is not bottlenecked at the power source. This capability is essential for applications that require both high data throughput and continuous power, such as video surveillance or high-capacity wireless links. The adapter is constructed with a compact and robust design, allowing it to be easily installed in a variety of settings without taking up excessive space. Its durable build ensures it can withstand the rigors of continuous operation, providing a reliable power source for critical network equipment. The POE-24-AF5X includes multiple safety features to ensure the protection of both the adapter and the connected devices. It offers surge protection, which guards against voltage spikes potentially harmful to electronic equipment. Additionally, the adapter includes overcurrent protection, preventing damage from current overload that might otherwise lead to device failure

Ubiquiti PoE Injector (PoE-15-12W) 15VDC, 12W, 0.8A

The Ubiquiti AMO‑5G13 airMAX Omni Antenna is a 5GHz 13dBi carrier-class 2×2 dual-polarity MIMO omnidirectional antenna designed to seamlessly integrate with Rocket radios (Rocket sold separately). Pair the airMAX® Omni Antenna with a Rocket BaseStation for 360° coverage in Point-to-MultiPoint (PtMP) networks. Breakthrough 2×2, Dual-Polarity Design – airMAX® Omni Antennas are the first of their kind to feature a patented, dual-polarity omni design. Powerful Omnidirectional Coverage – airMAX® Omni Antennas provide 360° coverage 2×2 MIMO performance in Line-of-Sight (LOS) or Non-Line-of-Sight (NLOS) applicationsIndustrial-Strength Construction – airMAX® Antennas are designed with robust mechanical design for outdoor application Businessclaud.com and Play Integration – Every airMAX® Antenna has a built-in Rocket™ mount, so no tools are needed to install the Rocket BaseStation

Overview Indoor/Outdoor airMAX ® CPE Featuring a panel antenna and dual-polarity performance, the NanoStation ® M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor. Compact CPE Design The NanoStation ® M features the CPE design that expanded the global Wireless ISP industry. Plug and Play Installation The NanoStation ® M requires no tools for assembly; only a single wrench is required for pole-mounting. Versatile Application Use The NanoStation ® M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX ® CPE. Dual Ethernet Connectivity With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration. Powerful airOS ® Features Ubiquiti’s versatile airOS ® firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX ® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Technical Specifications Frequency: 5 GHZ Throughput: 150Mbps Range: 15km Power Supply (POE): 24V, 0.5A Max. Power Consumption: 8W Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) Gain: 14.6-16.1 dBi Networking Interface: (2) 10/100 Ethernet Ports Processor Specs: Atheros MIPS 74Kc, 560 MHz Memory: 64 MB DDR2, 8 MB Flash Frequency : 5 GHz Cross-pol Isolation : 22 dB Minimum Max. VSWR: 1.6:1 Beamwidth: 43° (H-pol) / 41° (V-pol) / 15° (Elevation) Polarization : Dual Linear Enclosure: Outdoor UV Stabilized Plastic Mounting: Pole-Mount Operating Temperature: -30 to 75° C Operating Humidity : 5 to 95% Noncondensing Wireless Approvals : FCC Part 15.247, IC RS210, CE RoHS Compliance : Ye s Shock & Vibration : ETSI300-019-1.4 View datasheet here

Overview Indoor/Outdoor airMAX ® CPE Featuring a panel antenna and dual-polarity performance, the NanoStation ® M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor. Compact CPE Design The NanoStation ® M features the CPE design that expanded the global Wireless ISP industry. Plug and Play Installation The NanoStation ® M requires no tools for assembly; only a single wrench is required for pole-mounting. Versatile Application Use The NanoStation ® M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX ® CPE. Dual Ethernet Connectivity With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration. Powerful airOS ® Features Ubiquiti’s versatile airOS ® firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX ® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Technical Specifications Frequency: 2.4 GHZ Throughput: 150Mbps Range: 13km Power Supply (POE): 24V, 0.5A Max. Power Consumption: 8W Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) Gain: 10.4-11.2 dBi Networking Interface: (2) 10/100 Ethernet Ports Processor Specs: Atheros MIPS 24Kc, 400 MHz Memory: 32 MB SDRAM, 8 MB Flash Frequency : 2.4 GHz Cross-pol Isolation : 23 dB Minimum Max. VSWR: 1.6:1 Beamwidth: 55° (H-pol) / 53° (V-pol) / 15° (Elevation) Polarization : Dual Linear Enclosure: Outdoor UV Stabilized Plastic Mounting: Pole-Mount Operating Temperature: -30 to 75° C Operating Humidity : 5 to 95% Noncondensing Wireless Approvals : FCC Part 15.247, IC RS210, CE RoHS Compliance : Ye s Shock & Vibration : ETSI300-019-1.4 View datasheet here

Ubiquiti Networks Managed Overview Provide high-bandwidth aggregation connectivity to multiple switches in your network with the US-16-XG Unifi Switch 16 10G 16-Port Managed Aggregation Switch from Ubiquiti Networks. The switch comes equipped with twelve 10G SFP+ ports, four 10G RJ-45 Ethernet ports, and a single RJ-45 serial console port making it easy to connect multiple switches directly to the US-16-XG switch. Once configured, users benefit from a non-blocking throughput of price showns, a switching capacity of price showns, and a forwarding rate of 238.10 Mpps to ensure the Ubiquiti Networks Aggregation Switch can handle even the most demanding network environments. Included with this Ubiquiti Networks switch is their own UniFi Controller software designed to simplify the management of everything from site management to switch configuration. A single network administrator can manage multiple sites from a single location using a centralized interface. The UniFi Controller software also makes it easy to access any managed UniFi Switch and configure settings including network/VLAN configuration, operating modes, storm control settings per port, 802.1x control and RADIUS VLAN, and much more. It is also possible to see the status of each port including connection speeds, Tx/Rx data rates, and network/VLAN settings. Hardware Switching Performance The US‑16‑XG offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. The total non-blocking throughput is up to price showns. 10G High-Capacity Links The US‑16‑XG offers maximum performance and low latency as an aggregation switch. For fiber connectivity, it features 12 SFP+ ports. For copper connectivity, the US‑16‑XG offers four RJ-45 ports that support 10GBASE-T, the standard for price showns connections using Cat6 (or higher) cabling and RJ-45 connectors. UniFi Controller Multi-Site Management A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring, configuration, maps, statistics, and admin accounts. Switch Configuration You can access any managed UniFi Switch through the UniFi Controller to configure a variety of features: • Operation mode (switching, mirroring, or aggregate) per port • Network/VLAN configuration • Jumbo frame and flow control services • Network settings • Storm control setting per port • Spanning tree configuration • 802.1x control and RADIUS VLAN • Debug terminal option for command-line interface Switch Port Status You can also view status information for each port: • Connection speed and duplex mode • TX/RX data rates • Network/VLAN setting

Ubiquiti Networks USW-ENTERPRISE-48-POE Overview Grow your business's network capacity to support power over Ethernet compatible devices such as security cameras, P phones, access points, and more with the UniFi Switch Enterprise 48 48-Port 2.5Gb PoE+ Compliant Managed Network Switch from Ubiquiti Networks. This rack mounted managed switch features 48 high-speed 2.5Gb Ethernet ports, each supporting up to 34W of power with a total budget of 720W. There are also four 10Gb SFP+ ports for fiber uplinks. Use the convenient 1.3" LCM color touchscreen to quickly configure, monitor, and troubleshoot your connections. Or you can manage your switch from almost anywhere using the UniFi Network app, which also includes an augmented reality feature that provides you with a visual overview of your port connections. Rackmount hardware is included. Performance The UniFi Switch Enterprise 48 supports Layer 3 functionality alongside an extensive suite of Layer 2 switching protocols. It includes a 320 Gb/s (160 Gb/s non-blocking) switching capacity and 238.09 Mpps forwarding rate to help ensure fast, smooth, and reliable data transfers. UniFi Network Controller Manage your networks from a single control panel Robust configuration, control, and monitoring features Remote firmware upgrades User and guest management Custom guest portal and hotspot support

All-in-One Enterprise Network Appliance Security Gateway 8 x Gigabit PoE | 10G SFP+ 10G SFP+ LAN & WAN Ports 2.5" / 3.5" HDD Bay 1.7 GHz ARM Cortex-A57 Quad-Core 4GB DDR4 RAM | 128GB SSD 1 RU Rack Size 1.3" Touchscreen Display UniFi OS Integration

Buy the Businessclaud Ubiquiti Networks U6 In-Wall Access Point from Businessclaud for genuine quality and reliable products. We provide authentic products with full warranty, fast nationwide delivery, and dedicated customer support

Ubiquiti TOUGHCable – PRO; Outdoor Shielded Ethernet Cable The industrial-grade, Category 5e TOUGHCable™ protects your networks from the most brutal environments. Increased Performance TOUGHCable™ dramatically increases your Ethernet link states, speeds and overall performance. Extreme Weatherproof Design TOUGHCable™ has been built to perform in even the harshest weather and environments

Overview Indoor/Outdoor airMAX ® CPE Featuring a panel antenna and dual-polarity performance, the NanoStation ® M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor. Compact CPE Design The NanoStation ® M features the CPE design that expanded the global Wireless ISP industry. Plug and Play Installation The NanoStation ® M requires no tools for assembly; only a single wrench is required for pole-mounting. Versatile Application Use The NanoStation ® M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX ® CPE. Dual Ethernet Connectivity With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration. Powerful airOS ® Features Ubiquiti’s versatile airOS ® firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX ® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Technical Specifications Frequency: 5 GHZ Throughput: 150Mbps Range: 10km Power Supply (POE): 24V, 0.5A Max. Power Consumption: 5.5W Operataing Frequency: 5170-5875 MHz Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) Gain: 13 dBi Networking Interface: (1) 10/100 Ethernet Ports Processor Specs: Atheros MIPS 74Kc, 560 MHz Memory: 64 MB DDR2, 8 MB FlashFrequency : 5 GHz Cross-pol Isolation : 20 dB Minimum Max. VSWR: 1.4:1 Beamwidth: 45° (H-pol) / 45° (V-pol) / 45° (Elevation) Polarization : Dual Linear Enclosure: Outdoor UV Stabilized Plastic Mounting: Pole-Mount Operating Temperature: -30 to 75° C Operating Humidity : 5 to 95% Noncondensing Wireless Approvals : FCC Part 15.247, IC RS210, CE RoHS Compliance : Yes Shock & Vibration : ETSI300-019-1.4 View datasheet here

Overview Indoor/Outdoor airMAX ® CPE Featuring a panel antenna and dual-polarity performance, the NanoStation ® M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor. Compact CPE Design The NanoStation ® M features the CPE design that expanded the global Wireless ISP industry. Plug and Play Installation The NanoStation ® M requires no tools for assembly; only a single wrench is required for pole-mounting. Versatile Application Use The NanoStation ® M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX ® CPE. Powerful airOS ® Features Ubiquiti’s versatile airOS ® firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX ® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Technical Specifications Frequency: 2.4 GHZ Throughput: 150Mbps Range: 5km Power Supply (POE): 24V, 0.5A Max. Power Consumption: 5.5W Opertaing Frequency: 2412 - 2462MHz Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) Gain: 8.5 dBi Networking Interface: (1) 10/100 Ethernet Ports Processor Specs: Atheros MIPS 24Kc, 400 MHz Memory: 32 MB SDRAM, 8 MB FlashFrequency : 2.4 GHz Cross-pol Isolation : 20 dB Minimum Max. VSWR: 1.4:1 Beamwidth: 60° (H-pol) / 60° (V-pol) / 60° (Elevation) Polarization : Dual Linear Enclosure: Outdoor UV Stabilized Plastic Mounting: Pole-Mount Operating Temperature: -30 to 75° C Operating Humidity : 5 to 95% Noncondensing Wireless Approvals : FCC Part 15.247, IC RS210, CE RoHS Compliance : Yes Shock & Vibration : ETSI300-019-1.4 View datasheet here

5 GHz PtMP LTU Client, functions in a PtMP environment with the LTU-Rocket as the BaseStation. Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Lite is a 5 GHz radio with an integrated antenna design for use as a PtMP CPE. LTU technology breaks through the limitations of 802.11 Wi-Fi technology and supports 1024 QAM for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to ad local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Auto power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation

LBE-M5-23 Ubiquiti LiteBeam is a complete solution; ideal for WISP setup. The radio frequency is 5GHz and the antenna gain is 23dBi, with PtP functionality. The Ubiquiti LBE-M5-23 is the latest evolution of a lightweight and compact, outdoor wireless broadband CPE (Customer Premises Equipment) from Ubiquiti Networks. The LBE-M5-23 is designed to be a cost effective and high performance solution for long-distance, wireless broadband bridging. It operates in the worldwide, license‑free 5GHz frequency range and features high performance of up to 100+ Mbps in real outdoor throughput and an incredible range of up to 18+ miles (30+ km). The LBE-M5-23 combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. Its InnerFeed technology integrates the entire radio system into the feedhorn of the antenna, and the revolutionary airMAX TDMA protocol enhances network performance and scalability. The LBE-M5-23 also features a unique ball joint mounting system that provides 3-axis adjustment flexibility for versatile mounting options. The mounting system, coupled with the built-in bubble level, enables quick and easy alignment. Product Features: • High-gain, directional antenna • Breakthrough industrial design • Compact size • Light weight Product Specifications: • Processor Specs: MIPS 74K • Memory: 64MB • Network Interface: 1 x 10/100 Ethernet Port • Operating Frequency: Worldwide: 5150 - 5875MHz, USA: 5150 - 5250, 5725 - 5850MHz • Antenna Gain: 23dBi • Maximum Power Output: 25dBm • Maximum Power Consumption: 4W • Power Supply: 24V, 0.2A PoE Adapter • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Operating Temperature: -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% noncondensing • Wind Survivability: 125mph (200km/h)

Description Ubiquiti LiteBeam AC Gen2 LBE-5AC-GEN2 Ultra-lightweight design with proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UISP mobile app support and fast setup. This Ubiquiti LiteBeam AC Gen2 LBE-5AC-GEN2 CPE features adjustment flexibility in three axes for versatile mounting options. The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the Ubiquiti 5ghz airMAX AC Litebeam Gen2 Radio blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti 5ghz airMAX AC Litebeam Gen2 Radio Features Access Point PtMP airMAX Mixed Mode airMAX ac Protocol Support Long-Range Point-to-Point (PtP) Link Mode Selectable Channel Width PtP: 10/20/30/40/50/60/80 MHz PtMP: 10/20/30/40 MHz Automatic Channel Selection Transmit Power Control: Automatic/Manual Automatic Distance Selection (ACK Timing) Strongest WPA2 Security

Overview 2x2 MIMO airMAX ® ac CPE The LiteBeam ® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam ® AC offers a more robust mount with separate azimuth and elevation adjustments. Now with airOS ® 8 and airView ® airOS ® 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. High-Gain, Directional, 2x2 MIMO Antenna The LiteBeam ® AC LR provides 26 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity. Breakthrough Industrial Design Featuring the freedom of three-axis alignment, the LiteBeam ® AC fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting. Compact in Size, Light in Weight A lightweight form factor contained within ultra-compact packaging, the LiteBeam ® AC is ideal for shipping and logistics. Specifications Throughput: 450+ Mbps Management Radio :No Gain: 23 dBi Download datasheet here

Ubiquiti Lite AP GPS 90 Degree Sector Antenna. The Lite AP GPS features an integrated high-performance 90 degree sector antenna and GPS Sync for scale-able, cost-effective airMAX AC networks. LiteAP GPS supports GPS Sync for faster, more scalable, carrier-class networks. Ubiquiti airMAX LiteAP Key Features Quick Installation High-Performance Sector AP Up To 450+ Mbps Real TCP/IP Throughput Lightweight, Low-Cost Solution The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. It also delivers up to 450+ Mbps real TCP/IP throughput and features an efficient form factor

60° PrismAP Isolation Antenna for Ubiquiti PrismStation & IsoStation Used with the PrismStation 5AC and IsoStation radios, these antennas deliver superb co‐location performance without sacrificing gain. Frequency: 5 GHz Beam Width: 60° Gain: 16 dBi

Protects Outdoor PoE Devices ESD and Surge Protection Compatible with Gigabit Networks Two Ethernet Jacks

Build and expand your network with Ubiquiti Networks® EdgeSwitch®, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. Features: (8) Gigabit RJ45 Ports (2) SFP Ports (1) Serial Console Port Non-Blocking Throughput: price showns Switching Capacity: price showns Forwarding Rate: 14.88 Mpps Maximum Power Consumption: 150W Supports POE+ IEEE 802.3at/af and 24V Passive PoE Wallmountable with Mount Brackets (Included) Desktop-Mountable (Do not physically stack the ES-8-150W.) DC Input Option (Redundant or Stand-Alone)

Advanced Switching Technology for the Masses. Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. Features: (24) Gigabit RJ45 Ports (2) SFP Ports (1) Serial Console Port Non-Blocking Throughput: price showns Switching Capacity: price showns Forwarding Rate: 38.69 Mpps Maximum Power Consumption: 25W Rack- or Wall-Mountable DC Input Option (Redundant or Stand-Alone

Ubiquiti EdgeRouter X SFP combine carrier-class reliability with enterprise-level features in a compact and affordable unit. Available in a rackmountable form factor with eight functional ports, the EdgeRouter Pro and 8-Port EdgeRouter models are capable of routing up to 2 million+ packets per second. Powered by a proprietary and intuitive graphical interface, EdgeOS, EdgeRouters can easily be configured for routing, security, and management features required to efficiently run your network. For advanced network professionals, an integrated CLI is available for quick and direct access using familiar commands. (5) Gigabit RJ45 ports with passive PoE support (1) Gigabit SFP port for backhaul applications Ports configurable for line-rate, Layer-2 switching 130 kpps for 64-byte packets price showns for 1518-byte packets (5) 10/100/1000 RJ45 Port, (1) 100/1000 SFP Port

Ubiquiti Networks introduces the EdgeRouter™ X, part of the EdgeMAX® platform. The EdgeRouter X combines carrier‑class reliability with excellent price‑to‑performance value in an ultra‑compact form factor. The ER-X, can be powered by an external power adapter or 24V passive PoE input. A passive PoE passthrough option* is available to support a single airMAX® device. Ubiquiti Edgerouter X Specifications Sophisticated Routing Features Advanced Security, Monitoring, and Management High-Performance Gigabit Ports

Overview EdgeRouter12 10-Port Gigabit Router and 2 SFP Ports Price/Performance Breakthrough The EdgeRouter ™ 12/12P offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to Businessclaud.com showns. Ten Gigabit Ethernet ports offer copper connectivity, while two SFP ports offer fiber connectivity. The EdgeRouter 12/12P supports Layer 2 switching. Versatile Design The EdgeRouter 12 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit, model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 12 is supported and managed by UNMS ™ (Ubiquiti ® Network Management System), a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX ® devices across multiple sites. Key Features (10) Gigabit RJ45 routing port Ports 0-7 can be configured for line-rate Layer 2 switching (2) Gigabit SFP ports 3.4 million packets per second for 64-byte packets Businessclaud.com showns for packets 1518 bytes or larger in size Silent, fanless operation Compact, durable metal case Download datasheet here

Brand: Ubiquiti

Advanced Switching Technology for the Masses. Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. Features: (48) Gigabit RJ45 Ports (2) SFP+ Ports (2) SFP Ports (1) Serial Console Port Non-Blocking Throughput: price showns Switching Capacity: price showns Forwarding Rate: 104.16 Mpps Maximum Power Consumption: 500W Supports POE+ IEEE 802.3at/af and 24V Passive PoE Rackmountable

Ubiquiti EdgeSwitch ES-24-250W is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. Ubiquiti

10G High-Capacity Links The EdgeSwitch features 12 SFP+ ports and four RJ45 10GBASE-T ports to efficiently deliver and aggregate data at 10G speeds. Powerful Switching Performance The EdgeSwitch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non‑blocking throughput, the EdgeSwitch supports up to price showns. Advanced Enterprise Switching The EdgeSwitch uses a sophisticated operating system that provides advanced switching features, including VLAN tagging and link aggregation, and limited layer-3 features, including static routing and DHCP server functionality. Downloads

Green_Compliant - Yes Green_Compliance_Certificate/authority - RoHS Ethernet_Port - Yes Fast_Ethernet_Port - Yes

Ubiquiti Part Number AMO-2G10 2.4GHz AirMax Omni (Not For Use With 5GHz) 10dBi, Rocket Kit Wind Survivability to 125mph

Overview airMAX ® 2x2 BaseStation Sector Antenna Pair the airMAX ® Sector Antenna with a Rocket ™ M BaseStation for sector coverage in Point-to-MultiPoint (PtMP) networks. Models: AM‑2G15‑120, AM‑2G16‑90, AM‑3G18‑120, AM‑5G16‑120, AM‑5G17‑90, AM‑5G19‑120, AM‑5G20‑90, AM‑9M13, AM‑M‑V5G‑Ti, AM‑V2G‑Ti, AM‑V5G‑Ti Breakthrough Design and Performance The innovative airMAX ® Sector Antennas feature carrier-class construction and 2x2, dual-polarity performance. Reduced Interference, Higher Gain Highly resistant to noise interference, the airMAX ® Sector Antennas provide superior gain and beam performance for high-capacity, multipoint networks. RF Isolation and Beamwidth Options The versatile airMAX ® Titanium Sector models feature advanced RF isolation and adjustable beamwidth options: 60°, 90° or 120°. Industrial-Strength Construction airMAX ® Antennas are designed with robust mechanical design for outdoor application use. Plug and Play Integration Every airMAX ® Antenna has a built-in Rocket ™ mount, so no tools are needed to install the Rocket BaseStation. Specifications Frequency: 5GHZ Gain: 19dBi Download datasheet here

Brand: Ubiquiti