Computer networks

Brand: D-Link

Manufacturer / Product: Ubiquiti Networks / RocketM2 Processor Specs: Atheros MIPS 24KC, 400MHz Memory Information: 64MB SDRAM, 8MB Flash Operating System: AirOS Networking Interface: 1 x 10/100 BASE-TX (Cat. 5, RJ-45) Frequency Band: 2.4 GHz (Standard) WiFi Standards: IEEE 802.11b: 11 Mbps IEEE 802.11g: 54 Mbps IEEE 802.11n: 300M Mbps TX Power: max. 28dBm RX Sensitivity: min. -97dBm TCP/IP Throughput: 150Mbps+ Antenna Connector: 2 x RP-SMA Connector (Waterproof) max. Power Consumption: 6.5 Watt Power Method: Passive Power over Ethernet PoE Injector is included Power Input: 12-24V, 12 Watt Dimensions: 16cm x 8cm x 3cm Weight: 0.5 kg Appliance: In- and Outdoor Operating Temperature: -30°C to +75°C Operating Humidity: 5 to 95% non condensing

The Mikrotik wAP ac RBwAPG-5HacT2HnD is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

TP-Link Pigtail Cable TL-ANT24PT Overview -Easy to install and use -Manufactured using 50cm Low Loss CFD-200 cable that provides a higher performance cable with excellent flexibility -N Male to RP-SMA Male connector, applicable in most of connections between the wireless AP/Router and antenna What This Product Does The TL-ANT24PT pigtail cable is ideal for flexible connection between rigid outdoor cable and wireless access points/routers. It is very easy to use, no configuration or installation software required. Product Specifications TP-Link Pigtail Cable TL-ANT24PT Frequency DC ~ 3GHz Impedance 50Ω Nominal Insertion Loss 0.8 dB VSWR(MAX.) 1.5:1 Max. Connector Type N Male to RP-SMA Male Operating Temp. -10℃~+60℃ Storage Temp. -40℃~+80℃

The Ubiquiti AM-2G15-120 airMAX Sector Antenna is a carrier-class 2×2 dual-polarity MIMO sector antenna that was designed to seamlessly integrate with Rocket radios (Rocket sold separately).On the right is one example of how the airMAX Sector Antenna can be deployed in a Point-to-MultiPoint (PtMP) network. Flexibility – To support your specific application, the airMAX Sector Antenna is available in several frequency models: • 900 MHz• 2.4 GHz• 3 GHz• 5 GHz High Performance – Highly resistant to noise interference, the airMAX Sector Antenna provides superior gain and beam performance for high-capacity, multipoint networks. Durable Construction – Each airMAX Sector Antenna is designed with robust mechanical design for outdoor application use. Plug and Play Integration – Every airMAX Sector Antenna has a built-in Rocket mount, so installation requires no special tools. Snap the Rocket securely into place and mount the antenna; you then have the optimal combination of Rocket radio and airMAX Sector Antenna for your application. Pair the Rocket radio with the airMAX Sector Antenna to create a powerful basestation. This versatile combination gives network architects unparalleled flexibility and convenience Dimensions (mm) 700 x 145 x 93 Weight 4.0 kg Frequency Range 2.3 – 2.7 GHz Gain 15.0 – 16.0 dBi HPOL Beamwidth 123° (6 dB) VPOL Beamwidth 118° (6 dB) Electrical Beamwidth 9° Electrical Downtilt 4° Max. VSWR 1.5:1 Wind Survivability 125 mph Wind Loading 24 lbf @ 100 mph Polarization Dual-Linear Cross-pol Isolation 28 dB Min. ETSI Specification EN 302 326 DN2 Mounting Universal Pole Mount, RocketM Bracket, and Weatherproof RF Jumpers Included

Punch Tool Yellow/Grey, In White Box

-Connector: SC/APC -Length: 1m -Insertion loss [dB] : ≤ 0.3 - Return Loss [dB] : ≥ 60

IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant 16x10/100Mbps Auto-MDIX PoEports Provides up to 30 watts per PoE port PoE power budget 230W 4 KV surge protection for PoE ports IEEE 802.3x flow control support Plug-and-play installation Businessclaud.com showns switching fabric 2.75 MbitsRAM Data Buffer 4K MAC address entries Sturdy metal enclosure

Overview airMAX ® 2x2 BaseStation Sector Antenna Pair the airMAX ® Sector Antenna with a Rocket ™ M BaseStation for sector coverage in Point-to-MultiPoint (PtMP) networks. Models: AM‑2G15‑120, AM‑2G16‑90, AM‑3G18‑120, AM‑5G16‑120, AM‑5G17‑90, AM‑5G19‑120, AM‑5G20‑90, AM‑9M13, AM‑M‑V5G‑Ti, AM‑V2G‑Ti, AM‑V5G‑Ti Breakthrough Design and Performance The innovative airMAX ® Sector Antennas feature carrier-class construction and 2x2, dual-polarity performance. Reduced Interference, Higher Gain Highly resistant to noise interference, the airMAX ® Sector Antennas provide superior gain and beam performance for high-capacity, multipoint networks. RF Isolation and Beamwidth Options The versatile airMAX ® Titanium Sector models feature advanced RF isolation and adjustable beamwidth options: 60°, 90° or 120°. Industrial-Strength Construction airMAX ® Antennas are designed with robust mechanical design for outdoor application use. Plug and Play Integration Every airMAX ® Antenna has a built-in Rocket ™ mount, so no tools are needed to install the Rocket BaseStation. Specifications Frequency: 5GHZ Gain: 19dBi Download datasheet here

Specifications Computer Connections Single KVM: 8 Cascade Chaining: Up to 512 Selection Method Switch Button, Hot-Keys (PS/2 Keyboard), and On-Screen-Display (OSD) LEDs Red for PC Selected Green for PC On-Line/Ready PC Connectors 8 x HDB-15 female Support both PS/2 and USB platform servers Console Ports Keyboard: 1 x 6 pin mini-DIN female Mouse: 1 x 6 pin mini-DIN female Video: 1 x HDB-15 female Firmware Upgrade Port Mini USB Auto-Scan Interval 5 - 90 seconds Video Resolution Max. resolution up to 2048 x 1536 @ 65 Hz Hot-swappable Yes Operating Systems Supported Windows 98SE/ME/2000/2003/2008/XP/Vista/7, Linux, Mac OS 9/OS X and Sun Microsystems Power 5V, 2A Housing Material Metal Operating Temperature 32°-122°F (0-50°C) Humidity 0%-80% Relative Humidity Certifications FCC, CE, C-Tick, IC, CSA

Ubiquiti UniFi 24-Port PoE Switch (USW-24-POE) The Ubiquiti UniFi USW-24-POE is a configurable, Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and two SFP ports. Ubiquiti UniFi USW-24-POE Switch key features 24x 10/100/1000 RJ45 Ports 16x auto-sensing 802.3at PoE+ ports 2x SFP ports 1.3” touch LCM to provide status information Compact, fanless design The USW-24-POE provides Gigabit PoE links to RJ45 Ethernet devices and Gigabit fiber uplink options to enterprise networks. The switch features a 1.3″ touch LCM to provide status information. With a depth of 7.9″, the compact fanless design can be easily installed in a SOHO rack cabinet. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-24-POE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. Near silent cooling Ubiquiti’s new airflow design reduces the need for fan usage. Powerful hardware and software Ubiquiti UniFi Gen2 Switches offer a variety of features, including 10G SFP+ ports, PoE+ or PoE++ support, and Layer 3* switching capabilities. (*Layer 3 switching will be available in a future software release) UniFi SmartPower RPS, USP-RPS, is Ubiquiti’s PSU failover system. In the event of a UniFi USW-24-PoE switch power supply failure, the USP-RPS automatically supplies redundant power to the failed device. One UniFi SmartPower device can support up to 6 devices until the failed device is replaced.

Brand: D-Link

Minimum Order quantity 3 Overview Category 6, 8-position, 8-wire, keystone punchdown jack modules. Specifications Performance Level Category 6 Termination Style Punchdown Module Type Keystone Wiring Scheme T568A/T568B Shield Type Unshielded Maximum Operating Temperature (°C) 65 Maximum Operating Temperature (°F) 149 Minimum Operating Temperature (°C) -10 Minimum Operating Temperature (°F) -14 Maximum Storage Temperature (°F) 158 Color Arctic White Module Form Factor Keystone Material ABS/Polycarbonate Operating Temperature -14°F to 149°F (-10°C to 65°C) NetKey Category 6 UTP Jack Module

24 10/100Mbps Auto-Negotiation RJ45 ports, Supports Auto MDI / MDIX Green Ethernet technology saves the power up to 67% IEEE 802.3x flow control provides reliable data transfer Plastic case, desktop or wall-mounting design Plug and play, no configuration required

Product code: CRS326-24G-2S+RM CPU: 98DX3236 CPU core count: 1 CPU nominal frequency: 800 MHz Dimensions: 440 x 144 x 44 mm Operating System: RouterOS / SwitchOS Size of RAM: 512 MB Storage size: 16 MB S torage type: FLASH Number of DC inputs: 2 (DC jack, PoE-IN) DC input range: 10-30 V Max power consumption: 24W Max power consumption without attachments: 24W 10/100/1000 Ethernet ports: 24

D-Link DMC-520SSC 10/100Base-TX Fast Ethernet Twisted-pair to 100Base-FX Fast Ethernet Fiber 1310nm Single-mode Fiber (20 km, SC) Media Converter EU/UK plug Part Number: DMC-520SSC Media converters convert signals that are transmitted from one type of media to another so that they can be transmitted over a different type of media. This series of media converters converts 10/100/1000 Mbps copper ethernet to a 100/1000 Mbps fibre optic connection Businessclaud.com allows you to expand your network by connecting longer distance,cables between devices that are otherwise connected with short distance Ethernet cables, such as Cat.6 twisted-pair cables. Number of Ports • 1 x 10/100BASE-TX RJ-45 port • 1 x 100BASE-FX SC port Standards • IEEE 802.3 for 10BASE-T/F • IEEE 802.3u for 100BASE-TX/FX Data Transfer Rate • Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex) • Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode • Half-duplex/full-duplex Media Types • 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) • 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) • 100BASE-FX: Single mode-fi e optic cable with SC connector (up to 20 km) Media Exchange Interface • Auto-MDI/MDIX Transmission Mode • Store-and-forward Forwarding Rate • Full wire-speed forwarding rate Diagnostic LEDs • Power • Speed (for twisted pair ports) • Full-duplex/Collision • LINK/ACT (for twisted pair ports)

Unit is equipped with powerful 650MHz CPU, 64MB RAM, 10/100Mbps Ethernet port and has 5GHz 16dBi 28 degree beamwidth antenna. The SXT Lite5 ac supports 256-QAM modulation and 80MHz channels, so you get more speed per same frequency width as 802.11 devices. It also supports 802.11a/n, Nv2, Nstreme mode and is compatible with all legacy RouterBOARD devices. New industrial wireless chip QCA-9892 provides support for 5/10 MHz channel width for 802.11an standard.

Overview: The D-Link DGS-1024A 24-Port Unmanaged Gigabit Switch each offer an economical way for SOHO and small to medium businesses (SMB) to deploy an energy-efficient switch that features the increased bandwidth of Gigabit ports. Gigabit on Every Port The 24-Port Unmanaged Gigabit Switch series brings the speed of Gigabit Ethernet to each and every port for a truly high-speed network. If your network has a mix of legacy and modern computing capabilities, each port allows for standard Ethernet, Fast Ethernet, or Gigabit Ethernet connections. You have the latest technology available to every computer and device connected to your network. General Number of Ports Sixteen 10/100/1000 Gigabit ports Twenty-four 10/100/1000 Gigabit ports Switching Capacity price showns price showns Port Standard & Functions IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet ANSI/IEEE 802.3 NWay auto-negotiation IEEE 802.3x Flow Control IEEE 802.3az Energy Efficient Ethernet (EEE) Data Transfer Rates Ethernet: 10 Mbps (half duplex) 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex) 200 Mbps (full duplex) Gigabit Ethernet: 2000 Mbps (full duplex) Network Cables 10BASE-T: UTP CAT 3, 4, 5/5e (100 m max) EIA/TIA-586 100-ohm STP (100 m max) 100BASE-TX, 1000BASE-T: UTP CAT 5/5e (100 m max) EIA/TIA-568 100-ohm STP (100 m max) Media Interface Exchange Auto MDI/MDIX adjustment for all ports LED Indicators Per port: Link/Activity/Speed Per device: Power Transmission Method Store-and-forward MAC Address Table 8k 16k MAC Address Learning Automatic update MAC Address Filtering/Forwarding Rates Ethernet: price shown pps per port Fast Ethernet: price shown pps per port Gigabit Ethernet: price shown pps per port RAM Buffer 2Mbits 3.5Mbits Jumbo Frames 9216 Bytes D-Link Green IEEE 802.3az Energy Efficient Ethernet (EEE) Link status detection power saving Cable length detection power saving RoHS Compliance Physical & Environmental Power Inputs Switching 12V/1A level V power adapter Switching 12V/1.5A level V power adapter Power Consumption Power On (Standby): AC input: 3.12 Watts Power Max.: AC input: 7.89 Watts Power On (Standby): AC input: 6.86 Watts Power Max.: AC input: 14.17 Watts Heat Dissipation Power On (Standby): AC input: 10.65 BTU/h Power Max.: AC input: 26.92 BTU/h Power On (Standby): AC input: 23.41 BTU/h Power Max.: AC input: 48.35 BTU/h MTBF price shown hours price shown hours Operating Temperature 32 to 104 °F (0 to 40 °C) Storage Temperature 14 to 158 °F (-10 to 70 °C) Operating Humidity 10% to 90% non-condensing Storage Humidity 5% to 90% non-condensing Dimensions (W x D x H) 9.1 x 6.2 x 1.8 inches (231 x 158 x 46 mm) 10.1 x 7.0 x 1.8 inches (257 x 178 x 46 mm) Weight 1.28 lbs. (580g) 1.68 lbs. (760g) Certifications FCC Class A ICES-003 Class A CE Class A uCL CB VCCI Class A C-Tick Class A Warranty Limited Lifetime*

Height 22U Width 600mm Depth 800mm Colour RAL6089/RAL7035 Loading Capacity Static Loading 1000KG Doors Perforated or glass front door/ Perforated steel rear door 800mm include bifold rear doors. Side Panels Steel side panels with release handles and locks Top Panels 2 & 4 fan tray – Cabinets with glass doors only, multiple entry knockouts Mounting Rails Front & Rear mounting rails

Extralink Fiber Adapter SC/APC, Singlemode, Simplex Fiber optic adapters (also known as bulkheads) are used to join two fiber optic patch cables together. They are available for use with either single mode or multimode patch cables. Area of applications: Telecom network CATV network Ethernet network Optical communication equipment Pro duct specification Operating Temperature [°C] :-40 to +75°C Storage Temperature [°C] :-40 to +120°C Repeatability [dB] :≥1000 times Plug and unplug force [g/f] :200-600G Insertion Loss [dB] :0.2

A standard-based ADSL modem in built into this router, making connection to the Internet a breeze. The router also incorporates four 10/100Mbps Ethernet switch ports, providing ready connection for workstations and servers, while saving you the cost and trouble of installing a separate Ethernet switch. The router provides NAT protection for your office and home users from any Internet intruders and hackers, plus VPN pass-through for extra security. It also blocks and redirects certain ports. Specifications Built-in ADSL modem supporting G.992.1 Businessclaud.com full rate, G.992.2 Businessclaud.com, ANSI T1.413 issue 2 G.994.1 Businessclaud.com auto-negotiation of different ADSL flavors 4 10/100Mbps switch ports with IP multicast support Bridged Ethernet over ATM, PPP over ATM and IP over ATM, PPP over Ethernet Precise ATM traffic shaping Routing protocol supports RIP-1, RIP-2, Static Routing Built-in NAT, DHCP server Virtual Private Network (VPN) pass-through support DMZ and Virtual Server Mapping support PAP/CHAP authentication, administrative passwords through Telnet and the Web Built-in MIBs for SNMP management Web-based configuration setup TFTP and HTTP firmware upgradable UPnP enabled

Extralink Single-Mode Fiber Patch Cord | SC-LC/UPC, 3M, Duplex Connector type > SC-LC/UPC Length > 3M

Features Ceiling Design -With the aesthetic ceiling Design,WH302A can be deployed easily on ceiling or wall. High Power Design- Adopt independent power implifier to provide 400mw RF transimit power. Thus, the wireless signal is stronger and the coverage is optimized. Wireless N300 Speed -WH302A transfer rates of up to 300 Mbps on the 2.4 frequency bands for faster file transfers and smoother video streaming. Gigabit Ethernet Port- Up to 10X faster data transfer than tradinational Fast Ethernet. Ideal for streaming videos, VOIP, music, and multimedia applications Multiple Operation mode -WH302A can be configured to work as wireless Access Point,WDS Repeater, Universal Repeater mode and help you expand existing network.

8 10/100/1000Mbps RJ45 ports With four PoE ports, transfers data and power on one single cable Working with IEEE 802.3af compliant PDs, expands home and office network 802.1p/DSCP QoS enable smooth latency-sensitive traffic Supports PoE power up to 15.4W for each PoE port Supports PoE power up to 55W for all PoE ports Requires no configuration and installation

For Setup of Secure/Manageable Wireless LAN 108Mbps Turbo Mode High-Speed Wireless Connectivity Provides secure options for network Operable as Access Point or Wireless Bridge Advance Security System Scheme Solid Plenum Metal Chasis with 802.3af Power over Ethernet Suppport Provides Two High Gain Antenna fro optimal wireless coverage. The D-Link AirPremier DWL-3200AP is a powerful and reliable wireless access point for business-class enterprise environments. Designed for indoor installation, this access point provides secure options for network administrators to deploy a highly manageable and extremely robust wireless network. This access point supports Power over Ethernet (PoE) and provides two high-gain antennas for optimal wireless coverage. Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE802.3U, IEEE802.3af Data Rate for 802.11g: 108, 54, 48, 36, 24, 18, 12, 9 and 6Mbps for 802.11b: 11,5.5, 2, andl Mbps Wireless Frequency Range 2.4GHz to 2.4835GHz Antennas Dual 5dBi Gain detachable diversity dipole antennas with reverse SMA connectors

D-Link DGS-F1210-18PS-E 16-port Gigabit Long Range 250m PoE+ Smart Switch with 16 PoE ports, 2 SFP ports Part Number: DGS-F1018P-E Supports 16 Port Switch with 10/100/1000Mbps and 2 SFP Ports enables you to connect Power over Ethernet (PoE) devices. 16 10/100/1000 Mbps gigabit ethernet ports 2 SFP port 150watts available PoE

2 x LC Connectors Powerful Tx/Rx Wavelength price showns SFP+ Data Rate 984' Cable Distance Extend the reach of Ethernet cabling with the 2-pack of UF-MM-10G SFP+ Multi-Mode Fiber Modules from Ubiquiti Networks. These modules each feature LC connectors and support SFP+ data rates of up to price showns reaching distances of up to 984'.

Wireless N300 Universal Range Extender Wep Security Encryptions Tenda

Technical Specifications Power Rating: 0.039 kVA Feature Set: LAN Base Layer 2 Operating Relative Humidity: 10% to 95% noncondensing Dimensions: 44.5 x 27.9 x 4.5 cm Operating Temperature up to 5000 ft (1500 m): 23 to 113 F (-5 to 45 C) Uplinks: 4 SFP Weight: 4.0 kg Short-term Exception up to price shown feet (3000 m): 23 to 113 F (-5 to 45 C) MTBF: price shown hours Acoustic Noise (Typical / Maximum): 42 dB / 46 dB Forwarding Rate (64-byte Packet): 71.4 Mbps Short-term Exception up to price shown feet (4000 m): 23 to 104 F (-5 to 40 C) Operating Temperature up to price shown ft (3000 m): 23 to 104 F (-5 to 40 C) S torage Altitude: Up to price shown feet (4000 m) Short-term Exception up to 5000 feet (1500m): 23 to 122 F (-5 to 50 C) Voltage: 100 to 240 VAC, 50 to 60 Hz Storage Temperature up to price shown feet (4573 m): -13 to 158 F (-25 to 70 C) Short-term Exception at Sea Level: 23 to 131 F (-5 to 55 C) Operating Altitude: Up to price shown feet (3000 m)

MikroTik CRS305-1G-4S+IN | 5-port Desktop Switch w/ 1 GE Port and 4 SFP+ price showns Ports The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy, plus it's very sleek and compact metallic case without any fans, for silent operation It has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings 800 MHz CPU nominal frequency, 141 x 115 x 28 mm Dimensions, 512 MB RAM, 16 MB Storage size, 802.3af/at PoE in

Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a

Features RJ45 8P 8C 180˚C 50u Punch Down Jack. Terminating 4 pairs, 22-26 AWG Cable. Universal labels color coded for T568A and T568B wiring schemes. Fitting high density keystone panel.

Cisco Catalyst 2960-Plus 24PC-S Managed PoE Switch Applications and Benefits The Cisco Catalyst 2960-Plus Series provides cost-effective, enterprise class Ethernet switching for: • Branch offices, remote sites, and retail locations • Conventional desktop workspaces • Building infrastructure, physical security, and other nontraditional access applications Benefits of the Catalyst 2960-Plus 24PC-S include: • Robust quality of service (QoS) that prioritizes voice and critical business applications • Flexible security features that can limit access to the network and mitigate threats • Tools that reduce total cost of ownership through simplified operations and automation Cisco Catalyst 2960-Plus 24PC-S Description Ethernet Interfaces (24) 10/100 Ethernet Interfaces Uplink Interfaces 2 (SFP or 1000BASE-T) Cisco IOS Software Feature Set LAN Lite Maximum Number of PoE (IEEE 802.3af) Ports 24 ports up to 15.4W Available PoE Power 370W Flash memory 64 MB DRAM 128 MB Forwarding bandwidth price showns Maximum active VLANs 64 VLAN IDs available 4K Maximum transmission unit (MTU) – L3 packet 9000 bytes Jumbo frame – Ethernet frame 9018 bytes Forwarding Rate: 64-Byte L3 Packets, Millions of packets per second 6.5 Dimensions 1.73 x 17.70 x 13.07 Weight 5.4 Kg Predicted Reliability **MTBF in thousands of hours** 381 Console CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 For more information on this product, visit Cisco

48 10/100Mbps RJ45 ports Innovative energy-efficient technology saves power up to 50% Supports MAC address self-learning and auto MDI/MDIX Standard 19-inch rack-mountable steel case

Wireless-G Signal Booster With Three Mode Cnet

•4 Pairs Unshielded Twisted Pair (UTP) Cable • Conductor Metal: Bare Copper • Color Code: Blue/Gray • Conductor: 24 AWG • Insulation Material: HD-PE • Jacket Material: PVC UL94V-0 • Heat-resistant: 60OC minimum (Temperature limited) • Flame property: The purpose of the vertical flame test is to screen out flammable wires That follow to VW-1 (UL); FT-1 (CSA), either

Dimensions 650 x 650 x 304 mm (25.6 x 25.6 x 11.97") Weight 9.8 kg (21.61 lb) Frequency Range 4.9 - 5.8 GHz Gain 4.9 GHz: 26 dBi 5 - 5.9 GHz: 30 dBi HPOL Beamwidth 5° (3 dB) VPOL Beamwidth 5° (3 dB) F/B Ratio 34 dB Max. VSWR 1.4:1 Wind Loading 787 N @ 200 km/h (177 lbf @125 mph) Wind Survivability 200 km/h (125 mph) Polarization Dual-Linear Cross-pol Isolation 35 dB Min. ETSI Specification EN 302 326 DN2 Mounting Universal Pole Mount, Rocket Bracket, and Weatherproof RF Connectors Included

Equipped with a built-in 3G modem - No additional bulky devices required HSPA+ supported with up to 21.6Mbps download and 5.76Mbps upload speeds Powerful 2000mAh battery is ideal for extended hours of outdoor use Supports up to 10 users simultaneously

WH450A is a high power indoor ceiling access point for hotels, resorts,office buildings, campus or other environments that need to extend and expand an existing network Businessclaud.com with IEEE 802.11b/g/n,Providing fastest speed 450Mbps on 2.4GHz frequency. Adopt Independent 400mw power amplifier to enhance wireless signal and improve wall penetration. Pair with the 3 high quality antennas to boost wireless signal and provide greater coverage for laptops, tablets and Businessclaud.com the aesthetic ceiling Design, WH450A can be deployed easily on ceiling or in Businessclaud.com, WH450A can be deployed in areas where power outlets are scarce or not available with PoE Injector included or switch compliant with PoE 802.3at. Specification

A pair of industrial temperature grade (-40°C to +85°C) modules for 80km links, includes one S-45LC80D and one S-54LC80D. SFP module S-45LC80D: 1.25G, SM, 80km, T1490nm/R1550nm, LC-connector, DDM. SFP module S-54LC80D: 1.25G, SM, 80km, T1550nm/R1490nm, LC-connector, DDM. Compatible with all MikroTik products, that have SFP or SFP+ cages. Product specifications Details Product code S-4554LC80D Connector LC UPC Data Rate 1.25G Distance 80km Format SFP Mode SM Tested ambient temperature -40 to +70C Wavelength 1490nm/R1550nm

Key Features 1U Cable pass-through panel with brush strip Brush strip blocks unwanted airflow Improves cooling efficiency Segregates cold aisle from hot aisle

Overview The DES-1210-08P are built with 10/100 Mbps ports that are PoE-enabled, offering ease-of-use and green features such as Timebased PoE, which can shut off PoE power at a predetermined time. The Smart Fan feature on the DES-1210-08P allows the built-in fans to automatically turn on at a certain temperature, providing continuous, reliable, and eco-friendly operation of the switch. Compliant with 802.3af and 802.3at, the DES-1210-08P is capable of feeding power of up to 30 watts to devices. Management options include SNMP, Web Management, SmartConsole Utility, and Compact Command Line for easy deployment. The DES-1210 Series provides a complete and affordable solution that is ideal for small and medium businesses and the enterprise edge. Seamless Integration The Web Smart switches are designed to provide SMB users with complete control over their network. With Ethernet and Gigabit copper ports capable of connecting to existing CAT5 twisted-pair cables, these switches eliminate the need for complex reconfiguration. The DES-1210 Series allows for flexible connection to a backbone or server. Additionally, all ports support auto-negotiation of MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). IEEE 802.3x Flow Control allows servers to directly connect to the switch for reliable data transfer. At 2000 Mbps full-duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable Diagnostics allow network administrators to quickly examine the quality of the copper cables and also determine the type of cable error. QoS & Bandwidth Control The DES-1210 Series switches support Auto Surveillance VLAN (ASV) and Auto Voice VLAN for VoIP and video surveillance deployments. ASV ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or require high priority. Secure Your Network D-Link’s innovative Safeguard Engine protects against traffic flooding caused by virus attacks. These switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the internal IT network. The DES-1210 Series supports ARP Spoofing Prevention, which prevents the network from being cut off or eavesdropped by hackers using faked ARPs that pretend to be PCs, servers, routers, or gateways. For added security, DHCP Server Screening screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Versatile Management This new generation of Web Smart Switches provides growing businesses with simple and easy management of their network by using an intuitive SmartConsole utility and a web-based management interface that enables administrators to remotely control their network down to the port level. The SmartConsole allows customers to easily discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC and it also provides an easy setup of the Smart Switches. Switches within the same L2 network segment that are connected to the user’s local PC are displayed on screen for instant access. This allows for extensive switch configuration settings and basic configuration (password changes and firmware upgrades) of discovered devices. The DES-1210 Series supports D-View 6.0 and Compact Command Line Interface (CLI) control through Telnet. D-View 6.0 is a Network Management System that allows for central management of critical network characteristics and provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, and security. CLI management of switches is possible via Telnet, and allowing administrators to perform basic operations such as password changes, firmware upgrades, and configuration file uploads. Technical Specifications General Size 7.5” Metal Interface 8 10/100BASE-TX PoE Port • Standards IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) Auto-negotiation IEEE 802.3x Flow Control Performance • Switching Capacity: Businessclaud.com showns • 64-Byte Packet Forwarding Rate: 1.19 Mpps • MAC Address Table: Size 8K Entries • Packet Buffer Memory: 384 KB • Flash Memory: 16 MB • Forwarding Method: Store-and-forward Power over Ethernet (PoE) • PoE Standard: 802.3af • PoE Capable Ports: Port 1-8 up to 15.4 watts per port • PoE Power Budget: 72 watts Diagnostic LEDs • Power (Per Device) • Link/Activity/Speed (Per Port) L2 Features • MAC Address Table: 8K entries • Flow Control + 802.3x Flow Control + HOL Blocking Prevention •IGMP Snooping + IGMP v1/v2 Snooping + Supports 256 IGMP snooping groups + Supports 64 static multicast addresses + Per VLAN IGMP snooping + Supports IGMP Querier • L2 Multicast Filtering + Forwards all unregistered groups + Filters all unregistered groups • Spanning Tree Protocol + 802.1D STP + 802.1w RSTP • Loopback Detection • 802.3ad Link Aggregation + Max. 8 groups per device, max. 8 ports per group • Port Mirroring + One-to-One + Many-to-One + Supports Mirroring for Tx/Rx/Both • Cable Diagnostics • Configurable MDI/MDIX VLAN • 802.1Q tagged VLAN • VLAN Group + Max. 256 static VLAN groups + Max. 4094 VIDs • Management VLAN • Asymmetric VLAN • Auto Voice VLAN + Max. 10 user defined OUI + Max. 8 default OUI • Auto Surveillance VLAN QoS (Quality of Service) • 802.1p • Max. 8 queues per port, max. 8 ports per queue • Queue Handling + Strict + Weighted Round Robin (WRR) • CoS based on + 802.1p Priority Queues + DSCP • Bandwidth Control + Port-based (Ingress/Egress, min. granularity 64 Kb/s for 10/100 Mbps and 1850 Kb/s for 1000 Mbps) Access Control List (ACL) • Max. 50 ingress ACL profiles • Max. 240 ingress ACL rules shared by profiles • ACL based on: + MAC address + IPv4 address + ICMP/IGMP/TCP/UDP • ACL Actions + Permit + Deny Security • 802.1X + Port-based access control • Port Security + Supports up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control • Static MAC • D-Link Safeguard Engine • DHCP Server Screening • ARP Spoofing Prevention + Max. 64 entries • SSL + Supports v1/v2/v3 Management • Web-based GUI • Compact CLI through Telnet • Telnet Server • SmartConsole Utility • TFTP Client • SNMP + Supports v1/v2/v3 • SNMP Trap • Trap for SmartConsole Utility • System Log + Max. 500 log entries + Supports IPv4 log server • BootP/DHCP Client • Time Setting + SNTP • LLDP 1 • LLDP-MED 2 • Time-based PoE 1 MIB • 1213 MIB II • 1493 Bridge MIB • 1907 SNMP v2 MIB • 1215 Trap Convention MIB • 2233 Interface Group MIB • D-Link Private MIB • Power Ethernet-MIB 1 • LLDP-MIB 1 RFC Standard Compliance • RFC 768 UDP • RFC 783 TFTP client • RFC 791 IP • RFC 792 ICMP • RFC 793 TCP • RFC 826 ARP • RFC 854, 855, 856, 858 Telnet Server • RFC 896 Congestion Control in TCP/IP Network • RFC 903 Reverse Address Resolution Protocol • RFC 951 BootP Client • RFC 1155 MIB • RFC 1157 SNMP v1 • RFC 1191 Path MTU Discovery • RFC 1212 Concise MIB Definition • RFC 1213 MIB II, IF MIB • RFC 1215 Traps for use with the SNMP • RFC 1239 Standard MIB • RFC 1350 TFTP • RFC 1493 Bridge MIB • RFC 1519 CIDR • RFC 1542 BootP/DHCP client • RFC 1901, 1907, 1908 SNMP • RFC 1945 HTTP/1.0 • RFC 2131, 2132 DHCP • RFC 2138 Radius Authentication • RFC 2233 Interface MIB • RFC 2570, 2575 SNMP • RFC 2578 Structure of Management Information Version 2 (SMIv2) • RFC 2647 802.1p • RFC 3416, 3417 SNMP • RFC 3621 Power Ethernet (PoE Model only) MTBF (Hours) price shown hours Acoustics 0 dB Heat Dissipation 305.03 BTU per hour Power Input 100 to 240 VAC, 50 to 60 Hz Internal Universal Power Supply Max Power Consumption • 89.4 watts (PoE on) • 9.7 watts (PoE off) Dimensions (W x D x H) 190 x 120 x 38 mm Cooling Fans Fanless Operating Temperature 0 to 40˚ C Storage Temperature -10 to 70˚ C Operating Humidity 5% to 95% non-condensing Emission (EMI) FCC Class A, CE Class A, VCCI Class A, IC, C-Tick

Brand: D-Link

Features Equipped with a built-in 3G modem-no other bulky devices required HSPA+ supported with upto 21.6mbps download and 5.76 upload speeds Powerful 200mah battery is ideal for extended hours of outdoor use Supports up to 10 users simultaneously Specifications HARDWARE FEATURES Interface 1 micro USB port for power supply SIM Card Slot Micro SD card Slot Button Power On/Off Button Reset Button Power Supply Internal 2000mAh Rechargeable Battery Network Type 3G: DC-HSPA+/HSPA/UMTS B1/B8 (2100/900MHz) 2G: EDGE/GPRS/GSM Quad Band (850/900/1800/1900MHz) Data Rates DL: 21.6Mbps, UL:5.76Mbps Dimensions ( W x D x H ) 3.7×2.2×0.8in.(94×56.7×19.8mm) Antenna Internal Antenna Micro SD Card Reader up to 32G Band WCDMA：2100/900MHz GSM: 850/900/1800/1900MHz OLED Display Singal strength, Network type, Wi-Fi status, Message, Internet connection status, Battery meter, connection mode and Traffic Statistics WIRELESS FEATURES Wireless Standards IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Frequency 2.4-2.4835GHz Transmit Power 20dBm Wireless Security Support WPA-PSK/WPA2-PSK,Wireless MAC Filtering, Enable/Disable SSID Broadcast DHCP DHCP server, DHCP Client List OTHERS Certification CE, FCC, RoHS Package Contents 3G Mobile Wi-Fi M5350 Battery Micro USB Cable Micro to Standard SIM Card Adapter Nano to Standard SIM Card Adapter Quick Installation Guide System Requirements Windows 10/8/7/vista/XP，Mac OS, Android, iOS, Windows phone Weight 92.5g (battery included)

This unique module opens up a whole world of high speed connectivity possibilities, offering up to price showns speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to price showns, making it ready for the next generation of RJ45 hardware. S+RJ10 module is supported also on devices with passive cooling, but may require an extra cooling. New revision of S+RJ10 comes with several improvements: - Jumbo frames up to 10218 Bytes are now supported; - Link speed reporting is fixed - actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly; - DDM monitoring (Supply Voltage, Module temperature) is now supported. Details Product code S+RJ10 Connector RJ45 Data Rate 10 Mbps, 100 Mbps, price showns, Businessclaud.com showns, price showns, price showns Distance up to 200m Size of RAM 0 KB Storage size 256 KB Storage type FLASH Tested ambient temperature -20°C to 60°C

Fiber Optical Patch Panel 8 Port with FC LC SC adapters/ 8 Port Fiber Tray with LC Duplex Adapters.

Brand: D-Link

The D-Link DGS-1024A 24-Port Unmanaged Gigabit Switch offers an economical way for SOHO and small to medium businesses (SMB) to deploy an energy-efficient switch that features the increased bandwidth of Gigabit ports. Gigabit on Every Port The 24-Port Unmanaged Gigabit Switch series brings the speed of Gigabit Ethernet to each and every port for a truly high-speed network. If your network has a mix of legacy and modern computing capabilities, each port allows for standard Ethernet, Fast Ethernet, or Gigabit Ethernet connections. You have the latest technology available to every computer and device connected to your network. Innovative Design The sleek plastic case of the DGS-1024A series is an industry first for a Gigabit SOHO/SMB switch. Using a compact desktop style helps generate heat dissipation levels that allow for a fanless design, making the switches silent, as well as economical. The 24-Port Unmanaged Gigabit Switch series is small, lightweight, wall-mountable, and ideal for any business with big needs and a small budget. Conserves Energy The 24-Port Unmanaged Gigabit Switch series helps you conserve energy automatically through several methods. It automatically powers down ports that have no link, allowing the switch to save substantial amounts of power by cutting power usage for unused ports or any ports connected to computers that have been shut down. It can also detect connected cable lengths, and adjusts power usage accordingly, helping you save energy without affecting networking performance. Think Green The DGS-1024A 24-Port Unmanaged Gigabit Switch series makes use of D-Link Green Ethernet technology, providing more energy savings and a longer product life, without sacrificing operational performance or functionality. These environmentally friendly switches are also RoHS compliant, use recyclable packaging, and minimize the use of harmful substances. General features: Number of Ports • Twenty-four 10/100/1000 Gigabit ports Standards • IEEE 802.3 10BASE-T Ethernet • IEEE 802.3u 100BASE-TX Fast Ethernet • IEEE 802.3ab 1000BASE-T Gigabit Ethernet • ANSI/IEEE 802.3 NWay auto-negotiation • IEEE 802.3x Flow Control Data Transfer Rates Ethernet: • 10Mbps (half duplex) • 20Mbps (full duplex) Fast Ethernet: • 100Mbps (half duplex) • 200Mbps (full duplex) Gigabit Ethernet: • 2000Mbps (full duplex) Network Cables 10BASE-T: • UTP CAT 3, 4, 5/5e (100m max) • EIA/TIA-586 100-ohm STP (100m max) 100BASE-TX, 1000BASE-T: • UTP CAT 5/5e (100 m max) • EIA/TIA-568 100-ohm STP (100m max) Functionality D-Link Green Features • IEEE 802.3az Energy Efficient Ethernet (EEE) • Link status detection power saving • Cable length detection power saving • RoHS Compliance LAN Features • Back pressure at half-duplex operation • Auto MDI/MDIX • Wire speed reception and transmission • Store-and-Forward switching method • 16K MAC addresses • 3.5Mbits RAM for data buffering • Jumbo Frames: 9216 Bytes • Switching Capacity price showns Port Packet Filtering • 10M: 14,880pps • 100M: 148,800pps • 1000M: price shown,000pps LEDs • Power LED • 24 Link/Activity/Speed LEDs (one per port) Power Inputs • Switching 12V/1.5A Level V power adapter Power Consumption • Power On (Standby): AC input: 6.86 watts • Power Max.: AC input: 14.17 watts Heat Dissipation • Power On (Standby): AC input: 23.41BTU/h • Power Max.: AC input: 48.35BTU/h MTBF • price shown hours Dimensions • 257 x 178 x 46mm Weight • 0.76kg Operating Temperature • 0 to 40°C Storage Temperature • -10 to 70°C Humidity • 5% to 90% non-condensing Certifications • FCC Class A • ICES-003 Class A • CE Class A • VCCI Class A • C-Tick Class A • uCL • CB