Computer networks

Mikrotik PowerBox 650MHz CPU, 64MB RAM, 5xEthernet with PoE output for four ports, RouterOS L4, outdoor case, PSU. The PowerBox is an outdoor five Ethernet port router with PoE output on four ports. You can use this device to supply power to four PoE capable devices such as our SXT or others. Since the device has a waterproof outdoor case, you can mount it on a tower, or in other outdoor locations. The unit has five shielded Ethernet ports, four of which can power other PoE capable devices with the same voltage as applied to the unit (max current out is 1A per port, max total out is 2A). Less power adapters and cables to worry about. Specifications Details Product code RB750P-PBr2 Architecture MIPSBE CPU QCA9533 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 125x178x48mm RouterOS license 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C MTBF Approximately 100'000 hours at 25C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 8-30 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V Max power consumption 50 W Max power consumption without attachments 2 W FAN count Passive PoE-out Details PoE-out ports Ether2-Ether5 PoE out Passive PoE Max out per port output (input 30 V) 1 A Max total out (A) 2 A Ethernet Details 10/100 Ethernet ports 5 Other Details Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE, EAC, ROHS

MikroTik quickMOUNT Pro | Wall Mount Adapter for Small PtP/Sector Antennas The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device with the included pole adapter, or MikroTik’s small mounting clip (SXT clip adapter) with devices less than 1.5 kg. The adapter is very durable due to it’s special plastic composite material – anvilNITE (TM)

The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale

New RB1100AHx4 Dude Edition has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each, for a maximum throughput of up to Businessclaud.com showns. The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to Businessclaud.com showns with AES128). Unit comes with 1U rackmount case, 13x Gigabit Ethernet ports, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support). The RB1100AHx4 Dude edition features several high speed storage connectors (two SATA and two M.2) for using a Dude database, proxy cache or any other storage intensive feature. It includes a 60GB M.2 drive already installed. Send purchase questions Specifications Support & Downloads Gallery Test results Specifications Details Product code RB1100Dx4 Architecture ARM 32bit CPU AL21400 CPU core count 4 CPU nominal frequency 1.4 GHz Dimensions 443 x 148 x 44 mm RouterOS license 6 Operating System RouterOS Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF Approximately 200'000 hours at 25C Tested ambient temperature -40°C to 70°C IPsec hardware acceleration Yes Suggested price price shown Powering Details Number of AC inputs 2 Number of DC inputs 2 (2-pin terminal, PoE-IN) 2-pin terminal input Voltage -48, 20-57 V Max power consumption 33 W Max power consumption without attachments 25 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 20-57 V Ethernet Details 10/100/1000 Ethernet ports 13 Peripherals Details Extended storage 60GB M.2 SSD included M.2 slots 2 Memory card type microSD Memory Cards 1 SATA ports 2x SATA3 Serial console port RS232 Number of M.2 slots 2 Other Details Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE, EAC, ROHS IP IP20

Mikrotik RB2011iL-RM 1U rackmount, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. The RB2011iL-RM includes a new feature - power injector on Ethernet port 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports. RouterBOARD 2011iL-RM comes with 1U rackmount enclosure and power supply. Specifications Details Product code RB2011iL-RM Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Dimensions 443 x 92 x 44 mm RouterOS license 4 Operating System RouterOS Size of RAM 64 MB Storage size 128 MB Storage type NAND Tested ambient temperature -40°C to 60°C MTBF Approximately 100'000 hours at 25C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 8-30 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V Max power consumption 18 W Max power consumption without attachments 6 W FAN count Passive PoE-out Details PoE-out ports Ether10 PoE out Passive PoE Max out per port output (input 30 V) 510 mA Max total out (A) 510 mA Ethernet Details 10/100 Ethernet ports 5 10/100/1000 Ethernet ports 5 Certification & Approvals Details Certification CE, EAC, ROHS

Overview The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. The RB2011iL-RM includes a new feature - power injector on Ethernet port 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports for unbeliveable USD 99! RouterBOARD 2011iL-RM comes with 1U rackmount enclosure and power supply. Technical Specifications Product code RB2011iL-RM Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz License level 4 Operating System Size of RAM 64 MB Storage size 128 MB Storage type NAND Tested ambient temperature -40°C to 60°C PoE in Passive PoE PoE in input Voltage 8-30 V PoE out Passive PoE PoE-out ports Ether10 Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V Max out per port output (input 30 V) 510 mA Max total out (A) 510 mA Max power consumption 18 W Max power consumption without attachments 6 W 10/100 Ethernet ports: 5 10/100/1000 Ethernet ports: 5

MikroTik RB2011iLS is our first product with SFP cage for gigabit SFP transceivers and ideal solution for FTTH (Fiber To The Home) implementations. CPU nominal frequency 600MHz PoE 8-30V DC on Ether1 Max Power consumption 6W RouterBOARD 2011iLS-IN comes with desktop enclosure and power supply

The RB260GS (CSS106-5G-1S) is a small SOHO switch. The RB260GS features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The RB260G have five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The devices are running an operating system designed specifically for MikroTik Switch products - SwOS

Mikrotik RB260GSP is a small SOHO switch which features power output on ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The RB260GSP has five Gigabit Ethernet ports and one SFP cage switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS. MikroTik SwOS

Specifications Details Product code RB3011UiAS-RM Architecture ARM 32bit CPU IPQ-8064 CPU core count 2 CPU nominal frequency 1.4 GHz Switch chip model QCA8337 Dimensions 443 x 92 x 44 mm RouterOS license 5 Operating System RouterOS Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF Approximately 200'000 hours at 25C Tested ambient temperature -20°C to 70°C IPsec hardware acceleration Yes Suggested price price shown Powering Details Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 10-30 V Max power consumption 30 W Max power consumption without attachments 10 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 10-30 V PoE-out Details PoE-out ports Ether10 PoE out Passive PoE Max out per port output (input 18-30 V) 600 mA Max total out (A) 600 mA Ethernet Details 10/100/1000 Ethernet ports 10 Fiber Details SFP ports 1 Peripherals Details Serial console port RJ45 Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1

Mikrotik RB4011iGS+RM Powerful 10xGigabit port router with a Quad-core 1.4Ghz CPU, 1GB RAM, SFP+ price showns cage and desktop case with rack ears. RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ price showns interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+RM (Ethernet model) includes two rackmount ears that will securely fasten the unit in a standard 1U rack space. Note: The RB4011 does not support Passive DAC modules. Specification Details Product code RB4011iGS+RM Architecture ARM 32bit CPU AL21400 CPU core count 4 CPU nominal frequency 1400 MHz Dimensions 228 x 120 x 30 mm RouterOS license 5 Operating System RouterOS Size of RAM 1 GB Storage size 512 MB Storage type NAND Tested ambient temperature -40°C to 70°C MTBF Approximately 200'000 hours at 25C Powering Details PoE in Passive PoE PoE in input Voltage 18-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 33 W Max power consumption without attachments 18 W FAN count Passive PoE-out Details PoE-out ports Ether10 PoE out Passive PoE up to 57V Max out per port output (input 30 V) 600 mA Max out per port output (input > 30 V) 420 mA Max total out (A) 600 mA Ethernet Details 10/100/1000 Ethernet ports 10 Fiber Details SFP+ ports 1 Peripherals Details Serial port RJ45 Other Details PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE, EAC, ROHS

Experience unprecedented processing power with the MikroTik RB5009UG+S+IN, the ultimate home lab router featuring USB 3.0, 1G and 2.5G Ethernet ports, and a 10G SFP+ cage. Ideal for networking enthusiasts and professionals, this router supports mounting up to four units in a single 1U rackmount space. Key Features: 9 wired ports: 7x Gigabit Ethernet, 1x 2.5 Gigabit Ethernet, and 1x 10G SFP+ cage. Powered by a Marvell Armada Quad-core ARMv8 1.4 GHz CPU and a Marvell Amethyst family switch-chip, delivering high-speed connectivity and efficient data handling. Supports versatile power options: PoE-in from Ethernet port #1, DC Jack, and 2-pin terminal on the side. Equipped with 1GB DDR4 RAM and 1GB NAND storage for enhanced performance in CPU-intensive configurations. Compact design with efficient cooling via the case acting as a heat sink, ensuring reliable operation. For more information clickhere

The PowerBox is an outdoor five Ethernet port router with PoE output on four ports. You can use this device to supply power to four PoE capable devices such as our SXT or others. Since the PowerBox has a waterproof outdoor case, you can mount it on a tower, or in other outdoor locations. The PowerBox has five shielded Ethernet ports, four of which can power other PoE capable devices with the same voltage as applied to the unit (max current out is 1A per port, max total out is 2A). Size of RAM: 64 MB / Operating System: RouterOS

Mikrotik hEX lite (RB750r2) 5x Ethernet port router 850MHz CPU, 64MB RAM, 16 MB storage size, RouterOS L4 Includes 12V 0.5A power adapter Dimensions are 113x89x28mm and Weight without packaging and cables is 129g Perfectly fits into any SOHO environment

5x Gigabit Ethernet, SFP, Dual Core 880MHz CPU, 256MB RAM, USB, microSD, RouterOS L4, IPsec hardware encryption support and The Dude server package. HEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880 MHz CPU and 256 MB RAM, capable of all the advanced configurations that RouterOS supports. The device has a USB 2.0, PoE output for Ethernet port #5 and a 1.25Gbit/s SFP cage. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude

Features hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded It is affordable, small and easy to use. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment Dimensions: 113x89x28mm; PoE-out ports: Ether2-Ether5; PoE in/out: Passive PoE; Current, PCB temperature and Voltage Monitor

Mikrotik RB850Gx2 Dual Core P1023 533MHz CPU, 512MB RAM, 5xGigabit Ethernet, RouterOS L5 The RB850Gx2 is a five port Gigabit ethernet router. Comparing to the RB450G, the RB850Gx2 is much faster, with a dual core CPU, yet it still retains the same form factor, and will fit into the same enclosures. The device is powered by a 533MHz P1023 PPC CPU, and also includes a temperature sensor and voltage monitor. Specifications Details Product code RB850Gx2 Architecture PPC CPU P1023NSN5CFB CPU core count 2 CPU nominal frequency 533 MHz Dimensions 90mm x 115mm RouterOS license 5 Operating System RouterOS Size of RAM 512 MB Storage size 512 MB Storage type NAND Tested ambient temperature -40°C to 70°C MTBF Approximately 200'000 hours at 25C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 8-28 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-28 V Max power consumption 8 W FAN count Passive Ethernet Details 10/100/1000 Ethernet ports 5 Peripherals Details Memory card type microSD Memory Cards 1 Serial port RS232 Other Details CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes

The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n. Inside is the high power RB911G-5HPacD dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11ac high speed wireless. Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds. RB911G-5HPacD-QRT replaces the folowing EOL products: MikroTik QRT 2 RBQRTG-price shownPnD. Specification Frequency Range 4.9-5.875 GHz Gain 24 dBi Max Power Consumption 10.5 W 10/100/1000 Ethernet ports 1 Antenna beam width 3 dB Beam-Width, H-Plane: 10.5° 3 dB Beam-Width, E-Plane, typ: 10.5°

2GHz 802.11b/g/n outdoor wireless device CPU: Atheros AR9342 600MHz Memory: 64MB DDR SDRAM Ethernet: One Gigabit port OS: MikroTik RouterOS, Level4 license

Mikrotik BaseBox 5 RB912UAG-5HPnD-OUT in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit. MikroTik RouterOS, Level4 license (supports wireless AP mode) Built in 5GHz 802.11a/n,2x RP-SMA connectors

Features: This RB922UAGS-5HPacD-NM version is equipped with a miniPCI-express slot a SIM slot for 3G/4G device or additional wireless card, a high power 2x2 dual chain 802.11ac wireless and two RP-SMA connectors for external antennas The NetMETAL is a completely new 802.11ac product in a waterproof metal enclosure. Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for its high output power radio. The NetMETAL is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license. Specification: Product code RB922UAGS-5HPacD-NM SFP DDMI yes CPU nominal frequency 720 MHz CPU core count 1 Size of RAM 128 MB 10/100 Ethernet ports None 10/100/1000 Ethernet ports 1 MiniPCI slots 0 MiniPCI-e slots 1 Wireless chip model QCA9882-BR4A-R Wireless standards 802.11ac Number of USB ports 1 Power Jack 0 802.3af support no Supported input voltage 8 V - 30 V PoE out No PoE in Yes Voltage Monitor Yes CPU temperature monitor No PCB temperature monitor Yes Dimensions 143x247x48mm (PCB) Operating System RouterOS License level 4 Antenna gain DBI No Current Monitor No CPU QCA9557-AT4A-R Max Power consumption 17 W SFP ports 1 SFP+ ports None USB slot type USB type A Number of chains 2 Serial port None

The hAP mini is a small 2GHz wireless access point for home or small offices. The hAP mini (RB931-2nD) has three ports, which are configured as one Internet port and two LAN ports, but can be reconfigured as desired, using the powerful RouterOS configuration options. The powerful 650MHz CPU gives you full access to the wide variety of features provided by the versatile RouterOS operating system, but if all you want is a simple access point - it is already configured out of the box. You simply need to open it’s web configuration page and provide a password for it. The unit is powered by microUSB and measures only 8 cm tall. Even with it’s small size, the hAP mini is still quite powerful, as it uses the QCA9533 CPU, just like the bigger units in the widely successful hAP series. The hAP mini (RB931-2nD) has an omnidirecional antenna built-in, and does not have a strict limiation on number of connected clients. It works in 2 GHz and supports 802.11b/g/n standards

Features The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office. It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button. Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others. The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included Wireless standards: 802.11b/g/n

The RB951G-2HnD is a wireless SOHO AP CPU: Atheros AR9344 600MHz Memory: 128MB DDR2 SDRAM Ethernet: 5x Gigabit Ethernet ports OS: MikroTik RouterOS, Level4 license

It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in. It can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. 2x2 MIMO PIF antennas, max gain 2.5dBi Package contains: RouterBOARD in a plastic case, 24V 0.8A power adapter

Features This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas. The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included. hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network. Dual chain wireless 2.4GHz / 650MHz CPU / 64MB of RAM / Passive PoE output on port 5 / USB port for 3G/4G modem

Mikrotik PowerBox Pro Five Gigabit Ethernet Router with 4xPoE-out ports, SFP cage and outdoor enclosure. The PowerBox Pro is an outdoor five gigabit ethernet port router with PoE output on four ports. Since the device has a weatherproof outdoor case, you can mount it on a tower, or in other outdoor locations. It also supports passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 802.3at and af mode B compatible devices, if 48-57 input voltage is used. The device has a SFP port for adding optical fiber connectivity. It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Specifications Details Product code RB960PGS-PB Architecture MIPSBE CPU QCA9557 CPU core count 1 CPU nominal frequency 800 MHz Dimensions 125 x 52 x 225 mm RouterOS license 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C MTBF Approximately 100'000 hours at 25C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 12-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 54 W Max power consumption without attachments 6 W FAN count Passive PoE-out Details PoE-out ports Ether2-Ether5 PoE out 802.3af/at Max out per port output (input 30 V) 1 A Max out per port output (input > 30 V) 450 mA Max total out (A) 2 A Ethernet Details 10/100/1000 Ethernet ports 5 Fiber Details SFP ports 1 Other Details PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE, EAC, ROH S

The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes. The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location. Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and an SFP cage, for connecting active or passive optical network modules. Operating System RouterOS - License level 4

Type a description for this product here

Ceiling Access Point - RouterBoard cAP AC-US Dual-band 2.4 / 5GHz The cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. Mount on a ceiling or wall Two Gigabit Ethernet ports (one with PoE output)

Audience is a tri-band (one 2.4 GHz & two 5 GHz) home access point with meshing technology. If you need Wi-Fi in a huge building with all kinds of obstacles, simply add more Audience devices to your network – with a press of a button they will sync seamlessly and create a single Wi-Fi network to cover the whole premises. The initial setup is also very simple – download the iOS or Android MikroTik app, it will connect to the router and guide you through a quick setup process

Mikrotik RBFTC11 is a Fiber to Copper converter with 12-57V PoE and 802.3af/at support. Use the SFP module of your choice to match your fiber requirements and extend your copper connection. Unlike other media converters available on market, RBFTC11 has an outdoor waterproof case with tamper resisting lock screw

The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. Specifications Details Product code RBLHG-5HPnD-XL Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Dimensions Ø 550 x 245 mm; License level 3 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 10-28 V Number of DC inputs 1 (PoE-IN) Max power consumption 7 W FAN count Passive Wireless specifications Details Wireless 5 GHz Max data rate 300 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n Antenna gain dBi for 5 GHz 27 Wireless 5 GHz chip model AR9344 Wireless 5 GHz generation Wi-Fi 4 Ethernet Details 10/100 Ethernet ports 1 Certification & Approvals Details Certification CE, FCC, IC, EAC, ROHS Wireless specifications 5 GHz Transmit (dBm) Receive Sensitivity 6MBit/s 28 -96 54MBit/s 25 -80 MCS0 28 -96 MCS7 24 -75

Features microUSB for a 3G/4G modem, or for power input. CPU: Atheros AR9331 300MHz Memory: 64MB DDR SDRAM Ethernet: 2x 10/100 Mbit/s Fast Ethernet ports OS: MikroTik RouterOS, Level4 license

Mikrotik mAP lite Tiny size 2.4GHz Dual Chain access point with a 650MHz CPU, 64MB RAM and one Ethernet. The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile. You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you. It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device. The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz. Specifications Details Product code RBmAPL-2nD Architecture MIPSBE CPU QCA9533 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 48x49x11mm RouterOS license 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -30°C to 70°C MTBF Approximately 100'000 hours at 25C Wireless capabilities Details Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 1.5 Wireless 2.4 GHz chip model QCA9533 Wireless 2.4 GHz generation Wi-Fi 4 Ethernet Details 10/100 Ethernet ports 1 Powering Details MicroUSB input Voltage 5-5 V PoE in 802.3af/at PoE in input Voltage 10-60 V Number of DC inputs 2 (PoE-IN, MicroUSB) Max power consumption 3.5 W FAN count Passive Certification & Approvals Details Certification CE, FCC, IC, EAC, ROHS

OmniTIK 5 PoE is weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput. LED signal indicators on it’s back are fully customisableprice shownow Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK UPA also features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices (like SXT-5HPnD) with the same voltage as applied to the unit. Less power adapters to worry about! Box contains: OmniTik UPA-5HnD, mounting loops, PoE injector, 24v 2.5A power adapter Product Specifications Details Product code RBOmniTikUPA-5HnD CPU nominal frequency 600 MHz CPU core count 1 Size of RAM 128 MB Architecture MIPS-BE 10/100 Ethernet ports 5 Wireless chip model AR9344 Wireless standards 802.11a/n Number of USB ports 1 PoE in Yes Supported input voltage 11 V – 30 V PoE out Yes Voltage Monitor Yes PCB temperature monitor Yes Dimensions 368x125x55mm Operating System RouterOS Tested ambient temperature -30. +70C License level 5 Antenna gain DBI 7.5 CPU AR9344 Max Power consumption 11W USB slot type USB type A Number of chains 2 Storage type FLASH Storage size 16 MB

The SEXTANT is a 18dBi 5GHz antenna with a built in RB911G router. It has two polarizations to give you all benefits of 2x2 MIMO in 802.11n. Inside is the high power RB911 dual chain wireless device, with high performance, high output power, and a Gigabit Ethernet port, to fully utilize the benefit of 802.11n high speed wireless. Easy to use and quick to deploy, SEXTANT is ideal for point to point links. Package contains SEXTANTG5PHnD, mounting kit, PoE injector, power adapter

SXT Lite2 is a low price shown high transmit power 2.4GHz (2312 -2732MHz depending on country regulations) outdoor wireless device SXT can be used for point to point links, as a CPE for point to multipoint installations or even as an AP/Sector (G model) because of it’s wide beamwidth antenna Complete with a ready to mount enclosure and built-in 10dBi antenna, the package contains everything you need to set it up in a matter of minutes CPU: Atheros AR9344 600MHz / Ethernet: (1) 10/100 Ethernet Port, L2MTU frame size up to 4076 / Antenna: Dual-Pol 2GHz, 10dBi, - 18dB port to port isolation / Wireless Cards: onboard dual chain 2GHz 802.11b/g/n Atheros wireless module

Typical setups: WISP CPE, wireless point 2 point bridge, DSL gateway, licence level 3, free upgrades to MikroTik RouterOS version 6.x licence never expires, licence valid for one installation, unlimited number of interfaces, support for wireless station/client and point 2 point setups (no accesspoint) enhanced WIFI performace with MikroTik Nstreme and MikroTik Nv2 with TDMA support, RIP and OSPF and BGP* support (* no BGP on i386 version), 1 EoIP tunnel, 1 PPPoE tunnel, 1 PPTP tunnel, 1 L2TP tunnel, 1 OVPN tunnel 1 VLAN interface, 1 active hotspot user, up to 10 active MikroTik Usermanager sessions

SXT Lite5 is a low cost high transmit power 5GHz outdoor wireless device. It can be used for point to point links or as a CPE for point to multipoint installations. Best price/performance 5Ghz CPE. The SXT Lite5 (product code RBSXT5nDr2), 5Ghz 16dBi integrated antenna with 600MHz CPU, 64MB RAM and RouterOS L3 installed. SXT Lite5 provides the best price-performance ratio on the Wireless CPE market. Unit is equipped with powerful 600MHz CPU, 64MB RAM, 16dBi dual polarization antenna, poe, power supply and mounting kit. Onboard dual chain 5GHz 802.11a/n Atheros AR9344 wireless module; 10kV ESD protection on each RF port. Complete with a ready to mount enclosure and built-in 16dBi antenna, SXT contains everything you need make a point to point link, or connect to an AP

Buy the Businessclaud Mikrotik RBSXTG-5HPacD Antenna from Businessclaud for genuine quality and reliable products. We provide authentic products with full warranty, fast nationwide delivery, and dedicated customer support

Buy the Businessclaud Mikrotik RBSXTG-5HPacD-SA Antenna from Businessclaud for genuine quality and reliable products. We provide authentic products with full warranty, fast nationwide delivery, and dedicated customer support

Atheros AR7241 400MHz CPU 32MB DDR SDRAM onboard memory One 10/100/1000 (Gigabit) Ethernet port, L2MTU frame size up to 4076 Onboard dual chain 5GHz 802.11a/n Atheros AR9280 wireless module; 10kV ESD protection on each RF port

Mikrotik SXTsq Lite2 Low-cost small-size 10dBi 2.4GHz dual chain integrated CPE/Backbone The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner. Specifications Details Product code RBSXTsq2nD Architecture MIPSBE CPU QCA9533 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 129 x 129 x 34 mm RouterOS license 3 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C MTBF Approximately 100'000 hours at 25C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 1 (PoE-IN) Max power consumption 5 W FAN count Passive Wireless specifications Details Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 10 Wireless 2.4 GHz chip model QCA9533 Wireless 2.4 GHz generation Wi-Fi 4 Ethernet Details 10/100 Ethernet ports 1 Certification & Approvals Details Certification CE, FCC, IC, EAC, ROHS

The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 802.11b/g/n wireless AP with antennas built in. It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 – it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapte

The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison). The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and ). SXTsq Lite5 supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations)

In the garden, on your porch or anywhere else where you need wireless access from your phone or computer

• CPU: QCA9531-AL3 • CPU frequency: 650MHz • CPU cores: 1 • RAM: 64MB • 10/100 Ethernet ports: 1 • Wireless: 2.4GHz 802.11b/g/n built-in • Number of chains: 2 • Antenna gain: 2dBi • Antenna beam width: 360deg • Input voltage: 11 V - 57 V (Passive PoE and 802.3af/at with unshielded cable) • Max Power: 4W • OS: RouterOS, licence level 4