Computer networks

Former Linksys Business Series Supports price shown Mbps connectivity The SX module uses 850 nanometer wavelength light in multimode fiber optic cables, and can achieve distances up to 220 or 550 meters

Features 4G LTE supported with up to 150Mbps download and 50Mbps upload speeds Supports up to 10 devices simultaneously All useful information at a glance with screen display 2000mAh battery for up to 10 hours of working Selectable 2.4GHz or 5GHz dual band Wi-Fi Equipped with a micro SD card slot for up to 32GB of optional storage

The Sleeve30 kit for the mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna. Sleeve30 Kit also reduces wind load and protects antenna reflector and feed from harsh environment, improving PtP link sustainability. Sleeveprice shownell is made of corrosion resistive, lightweight aluminum; front cover has excellent RF signal transparency. Includes aluminum shell, front cover, fasteners, silicone sealant

D-Link DMC-920R/E 10/100Base-TX to 100Base-FX Single-Fiber Media Converter (TX: 1310μm; RX: 1550) Part Number: DMC-920R/E G DMC-920R / E - Media Converter / 10 / 100Base-TX to 100Base-FX Single-mode Fiber (20 km, SC) Dual-wavelength Media Converter. The DMC-920R / E media converter converts twisted-pair-to-single-mode optical cable over one fiber interfaces for 10 / 100Base-TX and 100Base-FX Ethernet networks. The DMC-920R can simultaneously transmit and receive signals at 1310 nm and 1550 nm over a single optical fiber for a distance of up to 20 km. The DMC-920R / E media converter uses 1550 nm for receiving data and 1310 nm for transmitting. The media converter is housed in a robust metal case and is equipped with 1 RJ-45 twisted pair port and 1 optical cable port (SC-connector) and can be used as a standalone device or installed in the universal 16-slot media converter chassis - DMC-1000. The media converter is hot-pluggable when used as part of a chassis. The DMC-920R / E supports control functions such as LLCF (Link Loss Carry Forward, Link Pass Through) and LLR (Link Loss Return) for the FX port. When the DMC-920R / E is installed in the DMC-1000 chassis, its special management module (DMC-1002) allows you to monitor the state of the communication channel, operating mode, speed values ​​and counters of received and transmitted packets for both media via SNMP. This module also allows you to set the operating mode, baud rate, enable and disable the LLCF and LLR functions for each physical medium.

Intelligent PoE Management. When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime. Up to 300 m Long Range PoE Transmission. The distance between IPCs and switch can reach maximum 300 meters. 4/8-Core Adaptive Power Supply with Less Power Loss. 8-core power supply reduces the power loss on cables. 6KV Surge Protection to Improve Reliability in Harsh Environment. The built-in surge protection device protects the switch from the sudden lightning surge in harsh environment. Design for Video Transmission. VIP port ensures important data transmission when network congestion occurs. Port Number 24 × 10/100 Mbps PoE ports, 1 × gigabit RJ45 port, and 1 × gigabit fiber optical port Port Type RJ45 port, full duplex, MDI/MDI-X adaptive Working Mode Standard mode (default); Extend mode Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x Forwarding Mode Store-and-forward switching Ports For Long-Distance Transmission Ports 17 to 24 MAC Address Table 4 K Internal Cache 2.75 Mbits Switching Capacity Businessclaud.com showns Packet Forwarding Rate 6.547 Mpps High Priority Ports Ports 1 to 8 PoE Power Supply PoE Standard IEEE 802.3af, IEEE 802.3at PoE Power Pin End-span: 1/2(-), 3/6(+) Mid-span: 4/5(+), 7/8(-) 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) PoE Port Ports 1 to 24 Max. Port Power 30 W PoE Power Budget 230 W Dialing Function Long Range Ports 17 to 24: up to 300 m; and the speed rate of the port is 10 Mbps.

STAINLESS STEEL CABLE TIE 8X240MM

Cisco C891F-K9 Integrated Services Router (ISR) with SFP Cisco C891F-K9 Integrated Services Router (ISR) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as customer premises equipment (CPE) in enterprise small branch offices and in service provider managed-service environments. How the Cisco C891F-K9 Integrated Services Router Addresses Edge Networking Challenges Business Need 890 ISR Feature(s)/Description High availability and business continuity ● Redundant WAN connections for failover protection and load balancing ● Dynamic failover protocols such as Virtual Router Redundancy Protocol (VRRP; RFC 2338), Hot Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP) ● Dial backup with external modem through a virtual auxiliary port Consistent, high application performance levels ● The router can run multiple services simultaneously with no performance degradation Risk mitigation with multilevel security ● Network perimeter security with integrated application inspection firewall ● Data privacy through high-speed IP Security (IPsec) Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption ● Enforced security policy with intrusion prevention ● Security hardware acceleration ● FlexVPN ● Next-generation encryption for secure network communications systems, reliable for the next decade ● Cisco ISR Web Security with Cisco ScanSafe, designed to prevent zero-day malware from reaching corporate networks Feature consolidation for real estate, capital expenditures (CapEx), and management savings ● Supports LAN connections, both Ethernet and Wi-Fi, in one appliance. Contains an integrated 802.11n WLAN access point that supports both autonomous and unified modes, as well as an 8-port LAN switch. Management of both the wired and wireless environments is integrated Unified control of wired and wireless networks from a common console for streamlined operations ● Simplifies and centralizes configuration and management of wireless and wireline devices. Supports WLAN services without requiring a wireless LAN controller Remote configuration and management to keep local IT staff lean ● Supports separate console, auxiliary, and USB ports ● Provides one USB 2.0 flash memory Specifications Product Code C891F-K9 Rack Units 1RU WAN Ports 1-port GE or 1‑port SFP 1-port FE LAN Ports 8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter) 802.11a/g/n Option Yes Cisco CleanAir technology Integrated USB 2.0/AUX/Console Yes DRAM 512MB Flash Memory 256MB Dimensions 4.62 x 32.28 x 24.84 cm (includes rubber feet) 4.45 x 32.28 x 24.84 cm (without rubber feet) Package Weight 4.49 Kg

Share with friends internet access for up to 10 devices simultaneously 2000 mAh battery for 8 hours of usage Supports the latest generation 4G FDD/TDD-LTE, compatible with the network of most countries and regions Easy management with the tpMiFi App

MikroTik quickMOUNT Pro | Wall Mount Adapter for Small PtP/Sector Antennas The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device with the included pole adapter, or MikroTik’s small mounting clip (SXT clip adapter) with devices less than 1.5 kg. The adapter is very durable due to it’s special plastic composite material – anvilNITE (TM).

Features 802.11N SUPPORT Compliant with 802.11n, the Linksys E3000 delivers high speed data transfer and remains compatible with 802.11g and 802.11b devices. SIMULTANEOUS DUAL-BAND Featuring the simultaneous 2. GHz or 5GHz bands, the Linksys E3000 can provides increased bandwidth optimized for smoother and faster HD video streaming, file transfers, and wireless gaming. MIMO TECHNOLOGY The Linksys E3000 features MIMO technology which uses multiple radios to create a robust signal and reduces dead spots to deliver high speed performance and great coverage. HIGH WIRELESS SECURITY The Linksys E3000 supports WPA and WPA2 standards for use of the available supreme encryption regardless of client devices and features a built-in SPI firewall to prevent potential attacks from the Internet. GIGABIT NETWORK CONNECTION The Linksys E3000 features 4 Gigabit LAN ports that provide up to 10x faster speeds than most 100M network connections to handle massive data-flow needs.. Specifications Model Brand Linksys Model E3000 Details Standards IEEE 802.11a/b/g/n Security WPA/WPA2 Personal SPI firewall protection WPA WPA2 WAN Ports 1 x WAN, 4 x 10/100/1000M LAN LEDs Power, USB, Internet, Wireless, Wi-Fi Protected Setup, Ethernet (1-4) Buttons Power, Reset, Wi-Fi Protected Setup Wireless Data Rates Up to 300Mbps Modulation 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM Wireless-N: BPSK, QPSK, 16-QAM, 64-QAM Frequency Band 2.4 GHz / 5 GHz Antenna 6 total, 3 internal antennas per each 2.4GHz & 5GHz radio band Transmitted Power 2.4GHz output power per TX chain 802.11b: Max. 20.5dBm @ All rates 802.11g: Max. 20.5dBm @ Low rates Max. 19.5dBm @ High rates Wireless-N 20MHz: Max. 20.5dBm @ Low rates Max. 18.5dBm @ High rates Wireless-N 40MHz: Max. 17.0dBm @ All rates 5GHz output power per TX chain UNII-1 (5150-5250GHz) 802.11a: Max. 14.0dBm @ All rates Wireless-N 20MHz: Max. 11.5dBm @ All rates Wireless-N 40MHz: Max. 12.0dBm @ All rates UNII-3 (5725-5850GHz) 802.11a: Max. 17.5dBm @ High rates 802.11a: Max. 20.0dBm @ Low rates Wireless-N 20MHz: Max. 17.5dBm @ High rates Wireless-N 20MHz: Max. 20.0dBm @ Low rates Wireless-N 40MHz: Max. 17.5dBm @ High rates Wireless-N 40MHz: Max. 21.0dBm @ Low rates Receiver Sensitivity 2.4GHz 11Mbps: -87dBm @ Typical 54Mbps: -77dBm @ Typical MCS15 (20MHz): -71dBm@ Typical MCS15 (40MHz): -68dBm@ Typical 5GHz 54Mbps: -74dBm @ Typical MCS15 (20MHz): -68dBm@ Typical MCS15 (40MHz): -65dBm@ Typical Interface USB 2.0 Wireless Adapter included No Dimensions 8.86" x 7.09" x 1.38" Weight 1.00 lbs. Temperature 0°C - 40°C (32°F - 104°F) Humidity 10% - 80% Features Features The Power of Dual-Band: A Wireless-N router with simultaneous 2.4 and 5 GHz bands designed to increase bandwidth. Optimized for smoother and faster HD video streaming, file transfers, and wireless gaming. Quick to Install: Cisco Connect Software has three simple steps to get you set up and your secure Wireless-Network is ready to go. A streamlined user interface allows you to choose from simple to advanced settings with no hassle. You're in Control: Cisco Connect software helps you customize your settings, quickly add multiple Internet devices to your network: Create a separate, secure, password protected network for guests Limit access time and websites with Parental Controls Easily access advanced network settings Keep Wi-Fi freeloaders and Internet threats at bay with customizable security settings, including WPA/WPA2 Personal and SPI firewall protection Built-in UPnP AV Media Server: Built-in AV media server streams entertainment content. The USB port provides connectivity to storage devices for file sharing at home or over the Internet.

The Ubiquiti Ufiber UF-GP-B+ GPON OLT SFP Transceiver increases the capacity of your UFiber OLT to connect your new customers quickly.

Description Ubiquiti LiteBeam AC Gen2 LBE-5AC-GEN2 Ultra-lightweight design with proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UISP mobile app support and fast setup. This Ubiquiti LiteBeam AC Gen2 LBE-5AC-GEN2 CPE features adjustment flexibility in three axes for versatile mounting options. The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the Ubiquiti 5ghz airMAX AC Litebeam Gen2 Radio blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti 5ghz airMAX AC Litebeam Gen2 Radio Features Access Point PtMP airMAX Mixed Mode airMAX ac Protocol Support Long-Range Point-to-Point (PtP) Link Mode Selectable Channel Width PtP: 10/20/30/40/50/60/80 MHz PtMP: 10/20/30/40 MHz Automatic Channel Selection Transmit Power Control: Automatic/Manual Automatic Distance Selection (ACK Timing) Strongest WPA2 Security

Type a description for this product here...

Overview Manage your UniFi networking and video devices simultaneously with the new multi-application UniFi Cloud Key G2 Plus. Designed for easy deployment, the Cloud Key G2 Plus can be quickly configured over Bluetooth using the UniFi mobile applications. The front panel display shows vital system stats for your UniFi networking hardware and UniFi Protect video cameras. A built-in battery provides protection against power loss. For video storage, it also includes a 1 TB HDD, which is upgradeable to 5 TB. Specifications Dimensions : 131.16 x 27.10 x 134.20 mm Weight : 582 g Enclosure : Anodized Aluminum Management Interface : UniFi Management Portal; UniFi SDN; UniFi Protect Hard Drive Capacity : 1 TB 2.5" SATA HDD (user-upgradeable) Device Capacity: UniFi Protect Mode: Up to 20 UniFi Cameras UniFi SDN + UniFi Protect : Up to 15 UniFi Cameras and 50 UniFi Devices Processor : APQ8053 8 Core with 3 GB RAM eMMC Memory: 32 GB Networking Interface : (1) 10/100/1000 Ethernet Port Buttons : (1) Power; (1) Reset LEDs: (1) Power, White/Blue Power Method : Standard 802.3af PoE; Quick Charge 2.0/3.0 Power Adapter (9VDC, 2A) Supported Voltage Range : Standard 802.3af PoE or 9VDC, 2A Max. Power Consumption : 12.95W (PoE); USB-C Power Operating Temperature: 0 to 35° C Operating Humidity : 20 to 80% Noncondensing Certifications : CE, FCC, IC Download datasheet here

Extralink Fiber Adapter SC/UPC, Multi-Mode, Simplex Fiber optic adapters (also known as bulkheads) are used to join two fiber optic patch cables together. They are available for use with either single mode or multimode patch cables. Area of Applications: Telecom network CATV network Ethernet network Optical communication equipment Product specification Operating Temperature [°C] :-40 to +75°C Storage Temperature [°C] :-40 to +120°C Repeatability [dB] :≥1000 times Plug and unplug force [g/f] :200-600G Insertion Loss [dB] :0.2

Boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly Compatible with 802.11 b/g/n and 802.11ac Wi-Fi devices Dual band speeds up to 750Mbps Miniature size and wall-mounted design make it easy to deploy and move flexibly Ethernet port allows the Extender to function as a wireless adapter to connect wired devices

D-Link Cat6 FTP 23 AWG PVC Solid Cable - 305m/Roll - Grey Colour Part Number: NCB-C6SGRYR-305 4 Pairs Foilded Twisted Pair (FTP) Cable Conductor Metal: Solid Bare Copper with 23 AWG Shield: Aluminum Polyester Foil Color Code: Gray Drain Wire: 26 AWG Jacket Material: PVC UL94V-0 PE Central Cross separator Mutual Capacitance: 5.6nF/100m nominal Characteristic Impedance: 100±15>#/li### Nominal Velocity of Propagation: 69>#/li### Conductor Resistance: 9.38/100m Mutual Capacitance: 5.6nF/100m Resistance Unbalance: 5% Max Capacitance Unbalance: 330pF/100m Delay Skew: 45nS Conductor Diameter: 0.560mm Nominal Insulation Diameter: 1.14 Nominal Insulation Material: HD-PE Cable Diameter : 7.00mm Nominal Product Datasheet

Material: PVC Size: 4" x 2" (100mm by 50mm) Standard: 2.5m length

50 Pair Telephone Box can be easily wall mounted and has three-wire insertion holes. Features: • Key hanger inside • Easy to install • Dimensional accuracy • Operating fluency

Mikrotik RB850Gx2 Dual Core P1023 533MHz CPU, 512MB RAM, 5xGigabit Ethernet, RouterOS L5 The RB850Gx2 is a five port Gigabit ethernet router. Comparing to the RB450G, the RB850Gx2 is much faster, with a dual core CPU, yet it still retains the same form factor, and will fit into the same enclosures. The device is powered by a 533MHz P1023 PPC CPU, and also includes a temperature sensor and voltage monitor. Specifications Details Product code RB850Gx2 Architecture PPC CPU P1023NSN5CFB CPU core count 2 CPU nominal frequency 533 MHz Dimensions 90mm x 115mm RouterOS license 5 Operating System RouterOS Size of RAM 512 MB Storage size 512 MB Storage type NAND Tested ambient temperature -40°C to 70°C MTBF Approximately 200'000 hours at 25C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 8-28 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-28 V Max power consumption 8 W FAN count Passive Ethernet Details 10/100/1000 Ethernet ports 5 Peripherals Details Memory card type microSD Memory Cards 1 Serial port RS232 Other Details CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes

The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber Businessclaud.com negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Businessclaud.com port supports MDI / MDI-X auto crossoverSupporting flow controlSupporting 1552 Byte packetInternal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt Businessclaud.com of internal or external power supply for selection by users Specification Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FXMAC address table: 1KConnector: UTP: RJ-45 10/100Mbps;Fiber: SC 100MbpsCable: UTP: Cat. 5 UTP (the max distance up to 100m)Fiber(Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)Flow Control Full Duplex: IEEE802.3xHalf Duplex: BackpressureLED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Businessclaud.com: AC 110V - 220V to DC 5V; DC48V to DC 5VAmbient temperature:0 ~ 50℃Storage temperature:-20 ~ +70℃Humidity: 5% ~ 90%Dimensions: Internal power: 30x110x140mmExternal power: 26x70x93mm

SYSTEM REQUIREMENTS Computer with: Windows 2000 (SP4), XP (SP2), or Vista (32 or 64-bit) or higher CD-ROM drive,20MB hard disk space, Available USB port STANDARDS : IEEE 802.11g, IEEE 802.11b FREQUENCY RANGE : 2.4GHz to 2.4835GHz @ EIRP: 18dBm ANTENNA: Integrated Antenna 0dBi SECURITY: 64/128-bit WEP data encryption,Wi-Fi Protected Access (WPA/WPA2-PSK, WPA/WPA2-EAP), 802.1x OPERATING VOLTAGE: 5VDC +/- 5% DATSHEET

What This Product Does The 48-Port Gigabit Switch TL-SG1048 is designed to meet the needs of the most demanding workgroup and departmental connectivity requirements. A reliable, easy-to-use switch without the complexity of management, the TL-SG1048 provides 48 10/100/1000Mbps ports. The TL-SG1048 combines ease of use with unsurpassed performance resulting in an exceptional value for any cost-conscious network administrator who wants the best possible solution at the best possible price. TP-Link Green Technology This new generation 48-Port Gigabit Rackmount Switch TL-SG1048 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with the EU’S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. Ease of Use The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Compact size shell make it ideal for desktops with limited space while it is also Rackmountable, convenient and safe. Dynamic LED lights provide real-time work status display and basic fault diagnosis. High Performance The TL-SG1048 features non-blocking wire-speed architecture with a price showns switching capacity for maximum data throughput. An 8K MAC address table provides scalability for even the largest networks. It also supports 802.3x Flow Control for full-duplex mode, and back pressure flow control for half-duplex mode alleviates traffic congestion and ensures reliable data transmission. Key Features Innovative energy-efficient technology saves power consumption 100% Data filtering rate eliminates all error packets Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode Non-blocking switching architecture forwards and filters packets at full wire-speed for maximum throughput price showns Switching Capacity Auto MDI/MDIX eliminates the need for crossover cables Supports MAC address auto-learning and auto-aging Support the port N-Way Auto-Negotiation, Store and Forward. Compact size design for desktops, Rackmountable Plug and Play design simplifies installation

Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Special ears are provided for mounting the unit in rack. Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes. Specifications Details Product code CRS212-1G-10S-1S+IN Architecture MIPSBE CPU QCA8519 CPU core count 1 CPU nominal frequency 400 MHz Dimensions 200 x 142 x 44 mm License level 5 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C Suggested price price shown Powering Details Number of DC inputs 1 (DC jack) DC jack input Voltage 8-30 V Max power consumption 20 W FAN count Passive Ethernet Details 10/100/1000 Ethernet ports 1 Fiber Details SFP ports 10 SFP+ ports 1 Peripherals Details Serial port RJ45 Other Details Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE/RED, EAC, ROHS

Siemon's fully shielded Category 7A 1000 MHz end-to-end cabling solution is the highest-performing, most secure twisted-pair copper cabling system available. Siemon's Category 7A 1000 MHz SFTP cable perfectly complements the performance of the TERA outlet exceeding all ISO/IEC requirements for Category 7A/Class FA transmission performance. A fully shielded cable with individual foils around each pair coupled with a high screen coverage outer braid provides perfect immunity from outside interferences. In addition, the cable jacket has been qualified for mechanical reliability in high temperature environments up to 75°C. In PoE remote power applications, this cable can be installed in environments up to 60°C and will not experience degradation due to heat rise inside the cable bundle. Further, this 7A cable is capable of running multiple lower speed applications, known as cable sharing, from one drop. Siemon cable is the ideal way to ensure optimum channel performance and is essential for a complete end-to-end warranted solution.

DINTEK PowerMAX TM Cat.6 Patch Panels are designed to exceed ANSI/TIA-568-2.D performance specifications and support both T568A and T568B wiring schemes. They can be terminated with an industry standard 110 or krone installation tool. The panels include a mounting slot for the DINTEK cable management bar, which easily mounts to the back of the panel, for improved routing and strain relief functionality. Combined with other DINTEK PowerMAX TM products, they are the perfect solution to your voice and data communications needs. Features Component level design Meets & exceeds all current Cat.6 standards Stripped window label for easy management 110 and krone dual type IDC termination 19” 24 port patch panel, 1U size & 48 port panel, 2U size Accepts 22~26AWG, stranded or solid wire Optional rear cable management Applications Voice; T1; ISDN 10BASE-T (IEEE 802.3) 16Mbps Token Ring (IEEE802.5) 100VG-AnyLAN (IEEE802.12) 100BASE-T Ethernet (IEEE802.3) 155/622Mbps 1.2/Businessclaud.com showns ATM 1000Mbps Gigabit Ethernet 550MHz Broadband Video Standards Conformance ETL verified ISO/IEC11801 2nd edition ANSI/TIA Standard 568-2.D CENELEC EN 50173 Independent Verified Certifications ETL Certificate of Conformance

•3G WAN failover allows mobile internet connection to take over if the wired Internet connection is lost • Load sharing allows Internet bandwidth to be distributed between a wired and a mobile Internet connection, easing network congestion • QoS (Quality of Service) optimizes data traffic to give you the best Internet experience

Ubiquiti PoE Injector (PoE-24-24W-G) | 24VDC, 24W, Gbit Ubiquiti Networks PoE injector for 24V devices offering up to 24W of power. Offers connection speed of up to price showns. It works great with Rocket M5 and UniFi access points, with ESD protection.

Wireless modem wifi pro 5g lte... get your internet with a sim card ... supports all networks

S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well. Product specifications Details Product code S+31DLC10D Connector Dual LC UPC Data Rate 10G Distance 10km Format SFP+ Mode SM Tested ambient temperature -40 to +70C Wavelength 1310nm

Overview Indoor/Outdoor airMAX ® CPE Featuring a panel antenna and dual-polarity performance, the NanoStation ® M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor. Compact CPE Design The NanoStation ® M features the CPE design that expanded the global Wireless ISP industry. Plug and Play Installation The NanoStation ® M requires no tools for assembly; only a single wrench is required for pole-mounting. Versatile Application Use The NanoStation ® M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX ® CPE. Dual Ethernet Connectivity With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration. Powerful airOS ® Features Ubiquiti’s versatile airOS ® firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX ® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Technical Specifications Frequency: 5 GHZ Throughput: 150Mbps Range: 10km Power Supply (POE): 24V, 0.5A Max. Power Consumption: 5.5W Operataing Frequency: 5170-5875 MHz Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) Gain: 13 dBi Networking Interface: (1) 10/100 Ethernet Ports Processor Specs: Atheros MIPS 74Kc, 560 MHz Memory: 64 MB DDR2, 8 MB FlashFrequency : 5 GHz Cross-pol Isolation : 20 dB Minimum Max. VSWR: 1.4:1 Beamwidth: 45° (H-pol) / 45° (V-pol) / 45° (Elevation) Polarization : Dual Linear Enclosure: Outdoor UV Stabilized Plastic Mounting: Pole-Mount Operating Temperature: -30 to 75° C Operating Humidity : 5 to 95% Noncondensing Wireless Approvals : FCC Part 15.247, IC RS210, CE RoHS Compliance : Yes Shock & Vibration : ETSI300-019-1.4 View datasheet here

OVERVIEW 10/100Mbps Single-Mode Media Converter Complies with 802.3u 10/100Base-TX, 100Base-FX standards Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends fiber distance up to 12.5 miles (20km) What This Product Does The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media and vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 12.5 miles (20km). TECHNICAL SPECIFICATIONS Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 12.5 miles (20km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

100Base-TX UTP to 100Base-FX SM SC Fast Ethernet Fiber Media Converter (Up to 30km) Businessclaud.com

Brand: Cisco

Features Superior Range – High power amplifiers and high-gain antennas provide enhanced wireless range up to price shown sq ft. Wall-Penetrating Wi-Fi – Enhanced Wi-Fi signal cuts through walls and obstacles, eliminating dead zones 3 Modes Functionality – Offers three wireless modes, including Router, Range Extender, and Access Point 450Mbps Wireless Speed – Ideal for video streaming, online gaming and VoIP Specifications Standards Wi-Fi 4 IEEE 802.11n/b/g 2.4 GHz WiFi Speeds N450 2.4 GHz: 450 Mbps (802.11n) WiFi Range 4 Bedroom Houses 3× Detachable 9 dBi High-Gain Antennas Multiple antennas form a signal-boosting array to cover more directions and large areas High-Power FEM Improves transmission power to strengthen signal coverage WiFi Capacity Legacy Working Modes Router Mode Access Point Mode Range Extender Mode HARDWARE Processor Single-Core CPU Ethernet Ports 1× 10/100 Mbps WAN Port 4× 10/100 Mbps LAN Ports Buttons Wi-Fi On/Off Button Power On/Off Button WPS Button Reset Button Power 12 V ⎓ 1.5 A

Overview D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs. Technical Specifications Supplies PoE/PoE+ up to 30 Watts Gigabit connection Plug-and-Play installation Compact design with mounting brackets

25mm Rigid PVC Conduit

Brand: Generic

OVERVIEW The DGS-1210 Series is the latest generation of D-Link® Gigabit Web Smart Switches featuring D-Link Green 3.0 technology. The switches comply with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configuration features ensures your network remains protected after an upgrade from IPv4 to IPv6. By offering multiple management options, these switches allow quick deployment, infrastructure expansion, and seamless upgrades. Targeting small and medium sized businesses, the DGS-1210 Web Smart switches provide functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210 Series switches support 8, 16, 24, or 48 10/100/1000BASE-T ports. In addition, each switch supports 2 or 4 Gigabit SFP ports for optical connections using multimode or singlemode SFP transceivers. PoE Support Several models in the DGS-1210 series family support Power-over-Ethernet capabilities, simplifying deployments with IP cameras, VoIP phones, wireless access points, and other powered devices. These models include the DGS-1210-10P, DGS-1210-28P and DGS-1210-52MP. Using the switch’s management interface, an administrator can control various PoE functions, such as remotely rebooting cameras or access points, from anywhere on the network, including over the Internet. The switches also support time-based PoE – an option that allows administrators to set a time window that determines when each port’s PoE power is turned on and off. Energy Saving The DGS-1210 Series Switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low. For environments not fully supporting the standard, these switches offer advanced powersaving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom time profiles. The time profiles can also be applied to the PoE switches so that unnecessary power consumption can be saved during off hours. The switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. Easy Management The D-Link Web Smart Switch series is designed for easy management. All configuration can be performed through an intuitive browser-based Graphical User Interface regardless of the host PC’s operating system. The DGS-1210 Series switches also support a D-Link Network Assistant Utility that enables administrators to remotely control their network down to the port level. This utility allows customers to easily discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup by taking switches, within the same L2 network segment, that are connected to the user’s PC, and displaying them on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices, including password changes and firmware upgrades. In addition, the DGS-1210 Series supports D-View® 6.0 and Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a network management system that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. Auto Surveillance VLAN and Voice VLAN The D-Link Web Smart series automates the process of setting up IP surveillance and VoIP devices on a network. Auto Surveillance VLAN consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of realtime video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at a high level. Similarly, the Auto Voice VLAN guarantees clear quality and efficient transmission for all voice communication. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators and customer service representatives, can rapidly discover the type of error and determine the cable quality. Secure your Network D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. KEY FEATURES • 48 Ports 10/100/1000 Base-T PoE + 4 x Combo Gigabit UTP or Gigabit SFP slots • Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard • Support POE Power Budget up to 370 W • Equipped with IEEE 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Access Control List (ACL) feature to enhances network security • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Support Web-based GUI, Smart Console , Network Assistance Utility • Cable diagnostics function to help troubleshooting wiring problem TECHNICAL SPECIFICATIONS Interfaces • 48 x 10/100/1000 Mbps PoE ports • 4 x Gigabit SFP ports Port Standards & Functions • Ports 1 to 48 compliant with 802.3at Other Port Standards & Functions • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper) • IEEE 802.3az compliance • Auto-negotiation • IEEE 802.3x Flow Control • IEEE 802.3z Network Cables • UTP Cat. 5, Cat. 5e (100 m max.) Duplex Mode • Full/Half-duplex for 10/100 Mbps • Full-duplex for 1000 Mbps Media Interface Exchange • Auto MDI/MDIX adjustment for all twisted-pair ports Dimensions (L x W x H) • 440 x 430 x 44 mm (17.32 x 16.9 x 1.73 in) Weight • 6.52 kg (14.37 lbs) Diagnostic LEDs • Link/Activity/Speed (per 10/100/1000 Mbps port) • Power Fail/Power Ok (per PoE port) DATASHEET

Key Features Up to 450Mbps + Businessclaud.com showns IEEE 802.11ac, IEEE 802.11a/b/g/n Smart Wi-Fi Apps, tools and mobility, Beamforming Technology Best-in-class HD video streaming USB 3.0 & USB 2.0 port; 4 Gigabit ports 1 year limited warranty

Model: Tray 6450

Desktop/Rackmount Load Balance Broadband Router Up to 4 WAN 10/100 ports for multiple Internet connections. Load balancing by bandwidth distribution, by type of application, or simply failover when the main connection is disturbed . Web interface portal authentication evaluate and authenticate all the accesses to the Internet for better access and bandwidth management Marshals bandwidth resource to specific clients based on their unique application environments.

If you are looking for a single switch that will put your network setup ahead of the curve and power all the necessary devices – look no further! The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments. Unlike many other switches out there, our products are made with the system administrator in mind. This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other price showns devices. All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setups. We have included a mighty power supply that can provide 750 W of power – this switch can handle a lot. And there is a special bracket for easy cable management. CRS354-48P-4S+2Q+RM is extremely functional, and it has the best price-point on the market – it will make the perfect addition to a professional setup. The total non-blocking throughput is price showns, switching capacity is price showns and the forwarding rate reaches 235 Mpps. Specifications Details Product code CRS354-48P-4S+2Q+RM Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 443 x 382 x 44 mm License level 5 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to 60°C Suggested price price shown Powering Details Number of AC inputs 1 AC input range 100-240 Max power consumption 800 W Max power consumption without attachments 85 W FAN count 4 PoE-out Details PoE-out ports Ether1-Ether48 PoE out 802.3af/at Max out per port output (input 30 V) 1000 mA Max out per port output (input > 30 V) 570 mA Total output current 27A at 26V OR 13.2A at 53V Total output power 700W Ethernet Details 10/100 Ethernet ports 1 10/100/1000 Ethernet ports 48 Fiber Details SFP+ ports 4 Number of 40G QSFP+ ports 2 Peripherals Details Serial port RJ45 Other Details CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE/RED, EAC, ROHS

OVERVIEW The D-Link DGS-1210 Series Smart Managed Switches are the latest generation of switches to provide increased Power over Ethernet (PoE) output, a range of physical interface types, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1210 Series provides a cost-efficient and flexible solution for expanding any business network. The DGS-1210-52MP is a PoE Smart Managed Switch that provides 48 10/100/1000 Base-T PoE ports with 4 Gigabit SFP/RJ45 Combo ports. Seamless Integration The DGS-1210 Series includes a wide range of port and media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps combo ports, and 100/1000 Mbps SFP ports, allowing you to choose the most suitable media type for your requirements. The DGS-1210-52MP switch comes with 48 PoE Gigabit copper ports capable of connecting to existing Cat.5 (or higher) twisted-pair cables. Additionally, the last 4 ports of the DGS-1210-52MP offer either RJ45 or SFP connectivity and therefore provide an option for upstream or downstream server connections via fibre interface. Using the default presets, the administrator can quickly set up the switch without reconfiguring any settings. PoE Support All DGS-1210 Series PoE switches include support for IEEE 802.3af/at and higher power budgets, allowing more PoE devices to be powered by the switch and for devices to be installed in remote locations without immediate access to power outlets. The DGS-1210-52MP delivers Power over Ethernet (PoE) capabilities, making deployment with IP cameras, VoIP phones, and access points much easier. The DGS-1210-52MP complies with the 802.3af (PoE) and 802.3at (PoE+) standards and supports a 370 Watt power budget. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, the DGS-1210-52MP includes IGMP Snooping, Port Mirroring, Rapid Spanning Tree and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature, designed primarily for administrators and customer service representatives, can rapidly discover the type of error and determine the cable quality. Automatic Confguration The DGS-1210 Series supports Auto Voice VLAN and Surveillance Mode, which allow voice and video traffic to be automatically identified and handled differently to regular network traffic. Auto Voice VLAN detects Voice over IP (VoIP) traffic and automatically segments it from the rest of the network, increasing security and allowing Quality of Service (QoS) to be applied. Surveillance Mode detects compatible ONVIF cameras and places them in a surveillance VLAN, allowing a single switch to be used for voice, video, and data, removing the need for dedicated hardware and reducing maintenance costs. Secure your Network D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1x port-based authentication, allowing the network users to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. The DGS-1210-52MP switch includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARPmessages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Versatile Management The DGS-1210-52MP can be managed with the D-Link Network Assistant Utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment and display them on-screen for instant access. This allows for simultaneous configuration and basic setup of all discovered devices, including password changes and firmware upgrades. The DGS-1210 Series also supports D-View and Command Line Interface (CLI) through Telnet. D-View 7.0 is a network management system that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. KEY FEATURES • 48 Ports 10/100/1000 Base-T PoE + 4 x Combo Gigabit UTP or Gigabit SFP slots • Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard • Support POE Power Budget up to 370 W • Equipped with IEEE 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Access Control List (ACL) feature to enhances network security • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Support Web-based GUI, Smart Console , Network Assistance Utility • Cable diagnostics function to help troubleshooting wiring problem TECHNICAL SPECIFICATIONS hardware Interface 48-port 10/100 / 1000Base-T with PoE 4-port 1000Base-X SFP Automatic MDI / MDIX on all ports Indicators Link / Activity / Speed(on port 10/100 / 1000Base-T) Network Cables UTP Category 5, 5e (max. 100 m) Performance Switching matrix 104 Gb / s Switching Method Store-and-forward MAC-address table 16K entries per device Speed forwarding 64-byte packets 77,4 Mpps Packet buffer 3 MBThe amount of RAM 128 MBFlash-memory 16 MB DATASHEET

Brand: TP-Link

Mikrotik RB260GSP is a small SOHO switch which features power output on ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The RB260GSP has five Gigabit Ethernet ports and one SFP cage switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS. MikroTik SwOS

DH-PFS4226-24ET-360 is a dedicated PoE switch designed especially for the security industry. The PoE management function displays power control and real-time port consumption. The switch uses LD PoE technology to transmit power and data up to 250 m (820 ft). LD PoE extends transmission distances beyond the industry-standard 100 m, even with third-party PoE-compliant cameras. Features Layer 2 Managed PoE Switch Supports PoE, PoE+, and Hi-PoE (use with PFT1300 PoE Extender) 360 W PoE Budget 250 m (820 ft) PoE Transmission PoE Management, PoE Setting/Event Statistics/Green Po Search and Upgrade via Configuration Tool High Lightning Protection Design Non-blocking Video Transmission

Model: AF-5G34-S45 Frequency: 5.1 – 5.9 GHz Gain: 34 dBi The AF-5G23-S45 offers 34 dBi of gain and features the following advantages: • Low sidelobes reduce interference from other transmitters in the area. • High isolation enhances performance for co-location in tower-mounted installations. • The low-profile design with integrated radome reduces wind-loading. The Ubiquiti airFiber X Antenna AF-5G34-S45 features significant advances in noise isolation and beam performance to complement the airFiber X radios for carrier backhauls and Point-to-Point (PtP) bridging. The airFiber® 5X Antennas feature significant advances in noise isolation and beam performance to complement the airFiber X radios for carrier backhauls and Point-to-Point (PtP) bridging. You can pair an airFiber® X antenna with an airFiber X radio to create the endpoint of a high-performance, Point-to-Point (PtP) bridge or network backhaul (airFiber X radio sold separately).The airFiber X antenna uses the 5 GHz frequency band. Powerful Performance The Ubiquiti airFiber X Antenna AF-5G34-S45 delivers 2×2, dual-polarity performance. On the right is one example of how the airFiber X antenna with an airFiber X radio can be deployed as endpoints in a backhaul link to deliver bandwidth from a WISP network out to a neighborhood tower. From there, an airMAX® Sector antenna with a Rocket® radio delivers bandwidth to the WISP’s customers. Carrier-Class Construction Incorporating a dish reflector design for excellent beam directivity, the airFiber X antennas feature robust mechanical design using industrial-strength hardware for outdoor application use. Plug and Play Integration airFiber X antennas and airFiber X radios have been designed to seamlessly work together. Every airFiber X antenna has a built-in airFiber X radio mount, so installation requires no special tools. Snap the airFiber X radio securely into place and mount the antenna; you then have the optimal combination of airFiber X antenna and airFiber X radio for your PtP application.