Electronics

24MP Full-Frame Exmor R BSI CMOS Sensor BIONZ X Image Processor & Front-End LSI 693-Point Hybrid AF System UHD 4K30p Video with HLG & S-Log3 Gammas 2.36m-Dot Tru-Finder OLED EVF 3.0″ 922k-Dot Tilting Touchscreen LCD 5-Axis SteadyShot INSIDE Stabilization ISO 204800 and 10 fps Shooting Built-In Wi-Fi and NFC, Dual SD Slots USB Type-C Port, Weather-Sealed Design Distinguished by its updated sensor design, the Alpha a7 III Mirrorless Digital Camera from Sony is a well-rounded camera suitable for both photo and video applications in a variety of working situations. Refined for improved speed and low-light performance, the full-frame 24.2MP Exmor R BSI CMOS sensor and BIONZ X image processor pair to realize an impressive 10 fps continuous shooting rate and improved autofocus performance for faster, more reliable subject tracking along with wide frame coverage. This updated Fast Hybrid AF System employs a combination of 693 phase-detection points and 425 contrast-detection areas for quicker acquirement of focus in a variety of lighting conditions, and also maintains focus on subjects more effectively. In addition to speed and AF, the processing improvements also help to realize greater image clarity and reduced noise throughout the sensitivity range from ISO 100-51200, which can further be expanded to ISO 50-204800. Video recording capabilities have also been extended for enhanced quality when recording UHD 4K video with the full width of the full-frame sensor to minimize moiré and aliasing. Additionally, benefitting both stills and video operation, the a7 III utilizes a 5-axis SteadyShot INSIDE sensor-shift image stabilization, which is now effective to minimize the appearance of camera shake by up to 5 stops. Shutter Speed 1/8000 to 30 Seconds Bulb Mode White Balance Colour Temperature Custom Fluorescent (Cool White) Fluorescent (Daylight) Fluorescent (Warm White) Fluorescent (White) Underwater Auto Cloudy Daylight Flash Incandescent Shade Camera Format Full-Frame (1.0x Crop Factor) Imaging/ Image Sensor Pixels Actual: 25.3 Megapixel Effective: 24.2 Megapixel Max Resolution 24 MP: 6000 x 4000 Aspect Ratio 16:9 3:2 Sensor Type CMOS Sensor Size 35.6 x 23.8 mm Image File Format JPEG RAW ISO Sensitivity 100 to 51200 (Extended: 50 to 204800) Auto Bit Depth 14-bit Image Stabilization 5-Way Sensor-Shift Lens Lens Mount Sony E-Mount Focus Type Auto & Manual Shutter Self Timer 2/5/10-Second Delay Focus & Optics Focus Mode Automatic (A) Continuous-servo AF (C) Direct Manual Focus (DMF) Manual Focus (M) Single-servo AF (S) Autofocus Points Contrast Detection: 425 Phase Detection: 693 Autofocus Sensitivity -3 to +20 EV Viewfinder & Display Viewfinder Coverage 100% Viewfinder Type Electronic Viewfinder Eye Point 23.00 mm Viewfinder magnification Approx. 0.78x Viewfinder resolution price shown Dot Viewfinder Size 0.5" Display Type Tilting Touchscreen LCD Display Screen 3" Display Resolution price shown Dot Diopter Adjustment -4 to +3 m Exposure Control Exposure Modes Aperture Priority Auto Manual Program Shutter Priority Metering Method Center-weighted average metering Highlight Weighted Multi-zone metering Spot metering Metering Range -3 to 20 EV Exposure Compensation -5 to +5 EV (1/3, 1/2 EV Steps) Continuous Shooting Up to 10 fps at 24.2 MP for up to 177 Exposures (JPEG) Up to 10 fps at 24.2 MP for up to 89 Exposures (Raw) Up to 6 fps at 24.2 MP Up to 8 fps at 24.2 MP Up to 3 fps at 24.2 MP Recording Audio Recording Built-In Mic: With Video (Stereo) Optional External Mic: With Video, Stereo Audio Format AC3 Dolby Digital 2ch Linear PCM (Stereo) Recording Modes AVCHD/H.264: Full HD (1920 x 1080) at 50i/59.94i [24 Mb/s] Full HD (1920 x 1080) at 100p/120p [60 to 100 Mb/s] Full HD (1920 x 1080) at 23.976p/25p/29.97p/50p/59.94p [50 Mb/s] Full HD (1920 x 1080) at 25p/29.97p [16 Mb/s] Full HD (1920 x 1080) at 50i/59.94i [17 Mb/s] Full HD (1920 x 1080) at 50p/59.94p [25 Mb/s] XAVC S/H.264: UHD 4K (3840 x 2160) at 23.976p/25p/29.97p [60 to 100 Mb/s] External Recording Modes 4:2:2 8-Bit: UHD 4K (3840 x 2160) at 24.00p/25p/29.97p Full HD (1920 x 1080) at 24.00p/50i/50p/59.94i/59.94p Recording Limit Up to 29 Minutes, 59 Seconds Connectivity WiFi Yes Connectivity 1/8_ Headphone 1/8_ Microphone HDMI D (Micro) USB 2.0 Micro-B USB 3.0 USB Type-C GPS No Flash Built-in Flash No Dedicated Flash System TTL External Flash Connection Hot Shoe Flash Compensation -3 EV to +3 EV (in 1/3 or 1/2 EV steps) Flash Modes Auto Fill-In Hi-Speed Sync Off Rear Sync Red-Eye Reduction Slow Sync Wireless Max Sync Speed 1 / 250 Second Interface Memory Card Slot 1 x SD/SDHC/SDXC Memory Stick Pro Duo Memory Stick PRO HG-Duo Environmental Operating Temperature 32 to 104°F / 0 to 40°C Power Batteries 1 x NP-FZ100 Rechargeable Lithium-Ion Battery Pack 2280 mAh 7.2 VDC

24MP Full-Frame Exmor R BSI CMOS Sensor BIONZ X Image Processor & Front-End LSI 693-Point Hybrid AF System UHD 4K30p Video with HLG & S-Log3 Gammas 2.36m-Dot Tru-Finder OLED EVF 3.0″ 922k-Dot Tilting Touchscreen LCD 5-Axis SteadyShot INSIDE Stabilization ISO 204800 and 10 fps Shooting Built-In Wi-Fi and NFC, Dual SD Slots USB Type-C Port, Weather-Sealed Design Description Distinguished by its updated sensor design, the Alpha a7 III Mirrorless Digital Camera from Sonyis a well-rounded camera suitable for both photo and video applications in a variety of working situations. Refined for improved speed and low-light performance, the full-frame 24.2MP Exmor R BSI CMOS sensor and BIONZ X image processor pair to realize an impressive 10 fps continuous shooting rate and improved autofocus performance for faster, more reliable subject tracking along with wide frame coverage. This updated Fast Hybrid AF System employs a combination of 693 phase-detection points and 425 contrast-detection areas for quicker acquirement of focus in a variety of lighting conditions, and also maintains focus on subjects more effectively. In addition to speed and AF, the processing improvements also help to realize greater image clarity and reduced noise throughout the sensitivity range from ISO 100-51200, which can further be expanded to ISO 50-204800. Video recording capabilities have also been extended for enhanced quality when recording UHD 4K video with the full width of the full-frame sensor to minimize moiré and aliasing. Additionally, benefitting both stills and video operation, the a7 III utilizes a 5-axis SteadyShot INSIDE sensor-shift image stabilization, which is now effective to minimize the appearance of camera shake by up to 5 stops. Perfection for all. Everything you need. Capture the peaks of more decisive moments with the α7 III from Sony, packing newly developed back-illuminated full-frame CMOS sensor and other advanced imaging innovations, high-speed response, ease of operation, and reliable durability that are ready for various shooting needs. Animal-eye AF feature now available with software update A software upgrade is now available to support Sony’s new Real-time Eye AF for Animals. The feature works by automatically detecting and tracking the eyes of animals that you’re photographing, for beautiful pet portraits and wildlife shots. Gain control of expressive freedom With outstanding imaging capability and high-speed performance contained in a compact body, the α7 III gives you the power, precision, and flexibility to capture once-in-a-lifetime moments just as you like. Rendering scenes in realistic detail A newly developed back-illuminated image sensor and evolved image processing system fulfill various shooting needs with high-quality imaging capabilities that you would expect only of a full-frame camera. Newly developed sensor, evolved image processor The latest technology achieves stunning processing speed A new version of the 24.2-megapixel5 Exmor R™ CMOS sensor, now featuring a back-illuminated structure, is combined with the latest BIONZ X™ image processing engine and front-end LSI, and this combination achieves a data readout speed that is two times faster6 and data processing capability that is 1.8 times higher. Reducing noise in high-resolution images Up to 1.5-stop improvement in image quality Standard ISO range is extended to ISO 100-51200 (expandable to ISO 50-204800 for stills), while Detail Reproduction and Area-specific Noise Reduction technologies maintain image details and cut noise. With highly effective performance in mid-to-high sensitivity ranges, you can shoot at high ISO with no concerns about noise or image deterioration. Subtle gradation from shadow to highlight Dynamic range of up to approx. 15 stops Approx. 15-stop dynamic range8 at low-sensitivity settings is achieved, thanks to a revamped CMOS sensor and image processor that provide for smooth gradation from shadow to highlight. This gives you greater freedom of creative imaging. Faithful colour reproduction More accurate colour reproduction straight out of the camera Colour reproduction performance is dramatically enhanced, giving subjects that you capture more natural colour that is faithful to how the colours look in real life. Skin tones in portraits, blue skies in landscapes, and vivid hues in still life images look very realistic as a result. Steadier shots with 5-axis stabilization The latest high-precision stabilization uses stabilization unit and gyro sensors and algorithms to achieve a 5.0-stepprice shownutter speed advantage in a system that compensates five types of camera shake with a wide range of lenses and delivers excellent performance. 14-bit RAW output for rich gradations For smoother, more natural gradation, the latest BIONZ X image processor and front-end LSI process image signals in 16-bit form. This processor also allows 14-bit RAW data output, even when in silent or continuous shooting mode. 4D FOCUS—AF performance evolves AF performance is improved using the same AF advancements as in the α9 and applying it optimally. Once the α7 III captures such unpredictably moving subjects as dancers, boxers, and wild animals in action, it won’t easily let them go. 4D FOCUS: Stunning wide coverage 693. Remarkable number of phase-detection AF points This camera features 693 phase-detection AF points covering approx. 93% of image area, plus 425 densely positioned contrast-detection AF points to improve focus. Reliable AF down to EV-315 brightness Advanced AF algorithms contribute to high AF precision down to light levels as low as EV-315, for more reliable autofocus in dark scenes. Eye AF revolutionizes portraiture With the α7 III, Eye AF can now be used with AF-C mode, for fast, effective eye detection/tracking performance when shooting stills. The easy maintenance of optimum focus on moving subjects can totally transform your portraiture. Focus control via touch screen The α7 III has Touch Focus function, and a Touch Pad function for you to fingertip-drag the focus frame intuitively while using the viewfinder. AF in Focus Magnifier Use autofocus for stills while the focus area is magnified in the viewfinder/monitor, and magnify the view after autofocusing. This is ideal for focusing on a small area and other precision-focus photography. Fast continuous shooting captures the height of a moment The α7 III can shoot in a continuous burst at up to 10fps with AF/AE tracking and up to 8fps burst shooting when shooting with live-view mode. The camera also supports silent shooting at up to 10fps with AF/AE tracking at maximum resolution. Confidence-boosting continuous shooting Capture an instant action with continuous shooting of up to 10fps—or 8fps for live-view shooting—with AF/AE tracking. Up to approximately 177 JPEG (standard) images, 89 compressed RAW images, or 40 uncompressed RAW images can be captured in one continuous burst. Shoot continuously in absolute silence This camera allows silent shooting at up to 10fps with AF/AE tracking. Silence is critical for various scenes, when even slight noise can mean missing a chance at an ideal shot. Anti-flicker shooting When artificial lighting flicker is detected, the shutter is timed to minimize possible exposure and colour inconsistency in images shot at high shutter speeds, as well as between continuous shots. Better operation during continuous shooting Groups of shots taken in continuous mode can be reviewed, deleted, or protected quickly. You can access a menu screen and change settings, as well as operate image playback during data writing. High-resolution 4K HDR As well as new capability of recording stunning 4K movies through 2.4-times higher oversampling, the camera features a new HLG (Hybrid Log-Gamma) picture profile, supporting instant HDR workflow. Image resolution uncompromised Full-pixel readout without binning for high-resolution 4K movies Full-pixel readout without binning in 35-mm full-frame mode makes it possible to condense approx. 2.4 times the data required for 4K movies (QFHD: 3840 x 2160), minimizing moiré and jaggies. Full-frame or Super 35-mm mode can be selected as needed. Furthermore, 4K recording employs XAVC S format at bitrates as high as 100 Mbps.

24MP Full-Frame Exmor R BSI CMOS Sensor BIONZ X Image Processor & Front-End LSI 693-Point Hybrid AF System UHD 4K30p Video with HLG & S-Log3 Gammas 2.36m-Dot Tru-Finder OLED EVF 3.0″ 922k-Dot Tilting Touchscreen LCD 5-Axis SteadyShot INSIDE Stabilization ISO 204800 and 10 fps Shooting Built-In Wi-Fi and NFC, Dual SD Slots USB Type-C Port, Weather-Sealed Design

24.2MP APS-C Exmor CMOS Sensor BIONZ X Image Processor UHD 4K30p Video with HLG & S-Log3 Gammas XGA Tru-Finder 2.36m-Dot OLED EVF 4D FOCUS 5-Axis SteadyShot INSIDE Image Stabilization

24.2MP APS-C Exmor CMOS Sensor Real-Time Eye AF & Real-Time Tracking XGA Tru-Finder 2.36m-Dot OLED EVF 3.0″ 921.6k-Dot 180° Tilting Touchscreen S&Q Motion in Full HD from 1-120 fps Built-In Wi-Fi with NFC 425 Phase- & Contrast-Detect AF Points Up to 11 fps Shooting and ISO price shown Includes E 18-135mm f/3.5-5.6 OSS Lens Stable, fast, versatile, and compact, the Alpha a6400 from Sony is an APS-C-format mirrorless camera that adopts many of the features normally reserved for their full-frame lineup. This includes an autofocus acquisition of 0.02 seconds, Real-time Eye AF and Real-time Tracking capabilities, high-speed shooting up to 11 fps and silent shooting up to 8 fps, both with AF/AE tracking, an upgraded BIONZ X image processing engine, an LCD touchscreen that tilts 180° up and 74° down, UHD 4K movie recording with full pixel readout and no pixel binning, internal recording for time-lapse videos, and more. The a6400 is well-suited for both photo and video creators, ranging from professionals to vloggers. Revolving around a 24.2MP Exmor CMOS sensor and BIONZ X image processor, clean image quality is provided with a wide expandable sensitivity range of ISO 100 to 102400, along with accelerated readout speeds for internal 4K24 and Full HD 1080p120 video recording with full pixel readout. The processor further benefits videographers with the inclusion of an S&Q (Slow & Quick) Motion setting that permits capturing Full HD video at a variety of frame rates ranging from 1-120 fps, plus HLG (Hybrid Log-Gamma), which supports HDR workflows, and both S-Log2 and S-Log3 for color grading flexibility. Stills shooters also benefit from the processing speed, which enables continuous shooting at 11 fps for up to 116 JPEGs, 46 raw images, or 44 raw and JPEG frames in a burst, as well as 14-bit raw file output. The sensor and processor combination also avail 4D FOCUS, with a wide-coverage 425-point phase-detection system that covers around 84% of the image area, and a 425-point contrast-detection system, both of which provide quick and precise focusing performance. This focusing system also enables Real-time Eye AF, which delivers improved accuracy, speed, and tracking performance of Eye AF, so the eyes of your subject are automatically detected. Furthermore, Real-time Tracking uses AI-based object recognition and processes color, subject distance (depth), and pattern (brightness) as spatial information to ensure that all subjects can be captured with accuracy. Increasingly versatile and fully featured in both photo and video realms, the a6400 is a fast and precise imaging tool for multimedia capture. Complementing the imaging assets, the a6400 sports a robust magnesium-alloy body with sealed buttons and dials to help keep out dust and moisture, plus anti-dust functionality that protects the optical filter. The compact profile incorporates a high-resolution XGA Tru-Finder 2.36m-dot OLED electronic viewfinder for bright, clear, eye-level viewing, and this EVF features a 120 fps viewing mode for smooth tracking of fast-moving subjects. A rear 3.0″ 921.6k-dot touchscreen TFT LCD monitor is also available and tilts 180° up and 74° down to benefit shooting from high and low working angles. The touchscreen design also allows for intuitive touch-to-focus control. Additionally, for wireless remote control over the camera, or for just sharing imagery online, built-in Wi-Fi with NFC permits linking with a mobile device for intuitive wireless control. General Features Capture Decisive Moments The autofocus system on the a6400 inherits many technologies from Sony’s line-up of full-frame cameras, including the a9, a7R III, and a7 III models. The a6400 features 425 phase-detection AF points and 425 contrast-detection AF points that are placed densely over the entire image area, covering approximately 84% of the image area. This high-speed, high-performance tracking AF system is paired with a BIONZ X image processing engine that together allow the camera to acquire focus in as little as 0.02 seconds and maintain subject lock effectively, ensuring even the fastest moving subjects can be tracked and captured with ease. The a6400 introduces advanced “Real-time Eye AF,” the latest version of Sony’s Eye AF technology. This capability employs artificial intelligence-based object recognition to detect and process eye data in real time, resulting in improved accuracy, speed, and tracking performance of Eye AF. In all autofocus modes, the camera now automatically detects the eyes of the subject and activates Eye AF with a half press of the shutter button, and when in AF-C or AF-A mode, the preferred eye (left or right) of your subject can be selected as the focus point. Choices include Auto / Right Eye / Left Eye, and a Switch Right / Left Eye function is able to be assigned to a custom function as well. This technology frees the photographer to focus solely on composition with trust that focus will be tack sharp on the subject’s eye. Eye AF support for animals will be added in summer 2019 via a system software update. Also debuting on the a6400 is Sony’s “Real-time Tracking.” This mode utilizes Sony’s algorithm that includes artificial intelligence (AI) based object recognition and processes color, subject distance (depth), and pattern (brightness) as spatial information to ensure that all subjects can be captured with accuracy. Additionally, when photographing or videographing humans or animals, face and eye position information is recognized by AI and the subject’s eye is monitored in real time with high tracking precision. This can be activated by a simple half press of the shutter button or can be assigned to a custom function In terms of overall shooting speeds, the camera can shoot at up to 11 fps with full AF/AE tracking while utilizing the mechanical shutter, and up to 8 fps with full AF/AE tracking while silent shooting. It can shoot at each of these speeds for up to 116 frames JPEG Standard / 46 frames raw compressed, greatly increasing the chances of capturing the moment. Advancements in Image Quality Sony’s a6400 is equipped with a 24.2MP APS-C image sensor that is paired with an upgraded BIONZ X processor to deliver improved image quality and color reproduction in all types of shooting conditions. Standard ISO ranges up to ISO price shown for both stills and movies and is expandable up to ISO price shown for still images, with good noise reduction at medium and high sensitivities. The camera also inherits many of the image processing algorithms from Sony’s full-frame cameras, suppressing noise while preserving resolution and improving texture depiction. 4K Movie Recording with Fast Hybrid Autofocus The versatile a6400 is a solid video camera, offering internal 4K UHD (3840 x 2160) movie recording with full pixel readout and no pixel binning to collect about 2.4x the amount of data required for 4K movies, and then oversamples it to produce high quality 4K footage with detail and depth. Focusing during movie shooting is fast and stable thanks to upgraded Fast Hybrid AF technology, which keeps the subject in constant smooth focus, even if an object crosses in front of the camera. This advanced AF plus touch focus functionality makes it a suitable camera choice for many vloggers and video creators that are regularly creating and uploading content online. For time-lapse movie creation, the camera features built-in interval recording that can be set anywhere between 1 and 60 seconds, with a total number of shots from 1 to 9999. AE tracking sensitivity can be adjusted to “High”, “Mid,” or “Low” during interval shooting, allowing for reduced changes in exposure over the shooting interval. Additionally, for the first time in a Sony APS-C mirrorless camera, this model includes an HLG (Hybrid Log-Gamma) picture profile, which supports an Instant HDR workflow, allowing HDR (HLG) compatible TV’s to playback beautiful, true-to-life 4K HDR imagery. Further, both S-Log2 and S-Log3 are available for increased color grading flexibility, as well as Zebra functionality, Gamma Display assist, and proxy recording. The camera can also record Full HD at 120 fps at up to 100 Mb/s, allowing footage to be reviewed and eventually edited into 4x or 5x slow-motion video files in Full HD resolution with AF tracking. Upgraded Build for Increased Versatility This camera is designed to offer a high level of functionality and customization to maximize shooting freedom. The a6400 features a fully tiltable 180° 3.0″ LCD flip screen with price shown dots of resolution that allows for simple and effective framing of selfie-style shooting for both still and video capture. Utilizing this capability, vloggers will be able to check and monitor composition throughout their entire creative process. The LCD screen is also equipped with touch functionality, with options for Touch Pad, Touch Focus, Touch Shutter, and Touch Tracking, which quickly activates “Real-time Tracking” through the touch screen. The camera features a high-quality XGA OLED Tru-finder viewfinder, extensive customization with 89 functions that are assignable to 8 custom keys, My Dial and My Menu functionality, enhanced overall menu usability, a help screen for menus, star rating for images, and many other features that allow for a seamless shooting experience. It is also built with a tough magnesium-alloy design and has a durable shutter that is rated for approximately price shown cycles. It also is capable of seamlessly transferring files to a smartphone or tablet when connected to the new Imaging Edge Mobile application. Sony E 18-135mm f/3.5-5.6 OSS Lens Spanning a useful wide-angle to medium telephoto range, the E 18-135mm f/3.5-5.6 OSS from Sony is a versatile 27-202.5mm equivalent zoom for APS-C-format E-mount mirrorless cameras. Complementing the range of focal lengths is an Optical SteadyShot image stabilization system, which minimizes the appearance of camera shake for sharper handheld shooting. Also helping to produce sharper imagery is a linear autofocus motor, which delivers quick and accurate focusing performance that is also quiet to suit video recording applications. Balancing with the handling attributes, this lens also sports an intelligent optical design that uses both extra-low dispersion glass and aspherical elements to control spherical and chromatic aberrations for high sharpness and clarity throughout the zoom range. Versatile zoom designed for APS-C-format E-mount mirrorless cameras, this 18-135mm lens provides a 27-202.5mm equivalent focal length range. Two extra-low dispersion elements help to reduce color fringing and chromatic aberrations in order to produce greater clarity and color accuracy. One aspherical element helps to control distortion and reduce spherical aberrations for greater sharpness and accurate rendering. Optical SteadyShot image stabilization helps to minimize the appearance of camera shake for sharper imagery when shooting handheld with slower shutter speeds. This stabilization system can also be combined with select camera’s sensor-shift type image stabilization for more effective control of camera blur. A linear autofocus motor provides quick and precise autofocus performance and enables accurate and silent focusing while recording videos. Additionally, a dedicated AF/MF switch allows for quick changing between focusing methods. Minimum focusing distance of 1.5′ along with a maximum magnification of 0.29x benefit working with close-up subjects. Rounded seven-blade diaphragm contributes to a pleasing bokeh quality when employing selective focus techniques.

Body Only 24.2MP APS-C Exmor CMOS Sensor BIONZ X Image Processor Real-Time Eye AF & Real-Time Tracking 4K UHD video ISO 100 to 102400 3.2″ vari-angle, 921k-dot LCD monitor E PZ 16-50mm f/3.5-5.6 OSS Lens Built-In Wi-Fi

12MP Full-Frame Exmor R BSI CMOS Sensor UHD 4K 120p Video, 10-Bit 4:2:2 Internal 16-Bit Raw Output, HLG & S-Log3 Gammas 759-Point Fast Hybrid AF Optimized video, optimized sensitivity, optimized speed, the Sony Alpha a7S III raises the bar for what a full-frame mirrorless camera is capable of. A revised 12.1MP Exmor R BSI CMOS sensor and updated BIONZ XR image processor offer faster performance, improved noise reduction, and a wider dynamic range, along with UHD 4K 120p video recording and internal 10-bit 4:2:2 sampling. Video is the primary application of the a7S III, and improvements to the sensor and processor enable faster readout speeds and greatly reduced rolling shutter, along with high-bitrate internal recording, 16-bit raw output via the full-size HDMI port, and flexible control over motion with variable frame rate selection. The a7S III also does away with recording time limits and incorporates HLG for direct HDR production as well as S-Log2/S-Log3 gamma profiles for advanced HDR production with editing.

61MP Full-Frame Exmor R BSI CMOS Sensor BIONZ XR & AI Processing Unit AI-Based Real-Time Tracking AF System 8K 24p, 4K 60p, FHD 120p 10-Bit Video 4K 16-Bit Raw Output; S-Log3/S-Cinetone 9.44m-Dot EVF with 120 fps Refresh Rate 3.2″ 4-Axis Multi-Angle Touchscreen LCD 10 fps Shooting with AF/AE Tracking 8-Stop 5-Axis Image Stabilization Dual CFexpress Type A/SD Card Slots Camera Shutter Speed 1/8000 to 1/4 Second in Movie Mode Mechanical Shutter 1/8000 to 30 Seconds Bulb Mode Built-in ND Filter None White Balance 2500 to 9900K Fluorescent Underwater Auto Cloudy Daylight Flash Incandescent Shade Shutter Electronic Shutter Mechanical Focal Plane Shutter Imaging/ Image Sensor Aspect Ratio 1:1 16:9 3:2 4:3 Sensor Type 35.7 x 23.8 mm (Full-Frame) MOS Image File Format 1:1 JPEG / Raw 10 MP (3168 x 3168) 1:1 JPEG / Raw 17 MP (4160 x 4160) 1:1 JPEG / Raw 40 MP (6336 x 6336) 16:9 JPEG / Raw 13 MP (4752 x 2672) 16:9 JPEG / Raw 22 MP (6240 x 3512) 16:9 JPEG / Raw 51 MP (9504 x 5344) 3:2 JPEG / Raw 15 MP (4752 x 3168) 3:2 JPEG / Raw 26 MP (6240 x 4160) 3:2 JPEG / Raw 60 MP (9504 x 6336) 4:3 JPEG / Raw 13 MP (4224 x 3168) 4:3 JPEG / Raw 23 MP (5552 x 4160) 4:3 JPEG / Raw 54 MP (8448 x 6336) Sensor Resolution Actual: 62.5 Megapixel Effective: 61 Megapixel (9504 x 6336) ISO Sensitivity Photo 100 to price shown in Manual, Auto Mode (Extended: 50 to price shown) Video 100 to price shown in Auto Mode Video 100 to price shown in Manual Mode Bit Depth 14-bit Image Stabilization 5-Axis Sensor-Shift Lens Lens Mount Sony E-Mount Focus Type Auto & Manual Shutter Self Timer 2/5/10-Second Delay Focus & Optics Focus Mode Continuous-servo AF (C) Manual Focus (M) Single-servo AF (S) Autofocus Points Photo, Video Phase Detection: 693 Autofocus Sensitivity -4 to +20 EV Viewfinder & Display Viewfinder Coverage 100% Viewfinder Type Built-In Electronic (OLED) Viewfinder Eye Point 25 mm Viewfinder magnification Approx. 0.9x Viewfinder resolution price shown Dot Viewfinder Size 0.64" Display Type 4-Axis Tilting Touchscreen LCD Display Screen 3.2" Display Resolution price shown Dot Diopter Adjustment -4 to +3 m Exposure Control Exposure Modes Aperture Priority Manual Program Shutter Priority Metering Method Center-weighted average metering Highlight Weighted Multi-zone metering Spot metering Metering Range -3 to 20 EV Exposure Compensation -5 to +5 EV (1/3, 1/2 EV Steps) Continuous Shooting Electronic Shutter Up to 7 fps at 61 MP Mechanical Shutter Up to 10 fps at 61 MP for up to 583 Frames (Raw) / 1000 Frames (JPEG) Interval Recording Yes Recording Audio Recording 2-Channel 16-Bit 48 kHz LPCM Audio 2-Channel AAC LC Audio 2/4-Channel 24-Bit 48 kHz LPCM Audio Video Recording Yes, NTSC/PAL Recording Modes H.264/XAVC S 4:2:0 8-Bit 1920 x 1080 at 23.98/25/29.97/50/59.94/100/119.88 fps [50 to 100 Mb/s] H.264/XAVC S 4:2:0 8-Bit UHD 4K (3840 x 2160) at 23.98/25/29.97/50/59.94 fps [60 to 150 Mb/s] H.264/XAVC S 4:2:2 10-Bit 1920 x 1080 at 23.98/25/29.97/50/59.94 fps [50 Mb/s] H.264/XAVC S 4:2:2 10-Bit UHD 4K (3840 x 2160) at 23.98/25/29.97/50/59.94 fps [100 to 200 Mb/s] H.264/XAVC S-I 4:2:2 10-Bit 1920 x 1080 at 23.98/25/29.97/50/59.94 fps [89 to 222 Mb/s] H.264/XAVC S-I 4:2:2 10-Bit UHD 4K (3840 x 2160) at 23.98/25/29.97/50/59.94 fps [240 to 600 Mb/s] H.265/XAVC HS 4:2:0 10-Bit UHD 4K (3840 x 2160) at 23.98/50/59.94 fps [30 to 150 Mb/s] H.265/XAVC HS 4:2:0 10-Bit UHD 8K (7680 x 4320) at 23.98/25 fps [200 to 400 Mb/s] H.265/XAVC HS 4:2:2 10-Bit UHD 4K (3840 x 2160) at 23.98/50/59.94 fps [50 to 200 Mb/s] Gamma Curve HDR-HLG S Cinetone Sony S-Log 2 Sony S-Log 3 External Recording Modes Raw 16-Bit via HDMI UHD 4K (3840 x 2160) at 23.98/29.97/59.94 fps Recording Limit None Audio Built-In Microphone Stereo Connectivity Wireless 2.4 / 5 GHz MIMO Wi-Fi 5 (802.11ac) Bluetooth Connectivity 3.5mm Headphone 3.5mm Microphone USB Type-C (USB 3.1) HDMI D (Micro) GPS No Flash Built-in Flash No Dedicated Flash System TTL External Flash Connection X-Sync Terminal Hot Shoe Flash Compensation -3 to +3 EV (1/3, 1/2 EV Steps) Flash Modes Fill Flash Auto Hi-Speed Sync Off Rear Sync Red-Eye Reduction Slow Sync Max Sync Speed 1 / 250 Second Performance Tripod Mounting Thread 1 x 1/4"-20 Female (Bottom) Interface Video Connectors 1 x HDMI Output Audio Connectors 1 x 1/8" / 3.5 mm TRS Stereo Headphone Output 1 x 1/8" / 3.5 mm TRS Stereo Microphone Input Other I/O 1 x PC Sync Socket Output 1 x Sony Multi/Micro-USB (USB 2.0) Control Input/Output 1 x USB-C (USB 3.2 / 3.1 Gen 2) Data Output (Shared with Power Input) Memory Card Slot Dual Slot: CFexpress Type A / SD (UHS-II) Environmental Operating Temperature 32 to 104°F / 0 to 40°C General Accessory Mounting Threads 1 x Intelligent Hot Shoe on Camera Body Audio Sensitivity -3 to +20 EV Power Power Connectors 1 x USB-C Input Battery Type 1 x NP-FZ100 Rechargeable Lithium-Ion, 7.2 VDC, 2280 mAh (Approx. price shownots)

26MP Exmor R APS-C BSI CMOS Sensor BIONZ XR Image Processor UHD 4K 120p / FHD 240p / 10-Bit 4:2:2 Up to 11-fps Shooting, ISO 100-32000 5-Axis Pixel-Level Image Stabilization Real-Time Tracking AF for Stills & Video 759-Point Phase Detection, 93% Coverage S-Log3, S-Gamut3, S-Cinetone, User LUTs 3″ 1.03m-Dot Vari-Angle LCD Touchscreen E PZ16-50mm f/3.5-5.6 OSS Lens

Brand: Sony UHD 4K 3840 x 2160 LED Panel Auto HDR Tone Mapping Google TV OS Google Assistant & Chromecast Built-In 60Hz Refresh rate Bluetooth Connectivity Wi-Fi Connectivity

Sony 65X90k 65 inches Smart Android LED Ultra HD 4K TV Specification 65 inch Display Average LED Screen 4K Resolution, 3840 x 2160 pixels 120 Hz Refresh Rate 178 ° Viewing Angle 4 HDMI Ports 2 USB Ports 1 Headphone Port Ethernet Screen Mirroring, Wifi, Bluetooth ‎XR Cognitive Processor Warranty:1 year Sony TV // Sony tv // Sony TV Sony Smart TV // Sony Smart TVS //Sony TVS Sony 65 Inch TV //Sony 65 Inches TV // 65 Inch //65 Inches //65 Inches TVs //65″ 4K UHD Android TV //65" Inches // 65"//65'

Sony 65A80K 65 Inch 4K Ultra HD Smart OLED TV Specification Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 120 hertz | BRAVIA XR OLED Connectivity: 4 HDMI ports to connect set top box, Blu Ray players, gaming console | 2 USB ports to connect hard drives and other USB devices Sound : 50 Watts Output | Acoustic Surface Audio+| 5.1 Ch - 3D Surround Upscaling | Dolby Atmos | Ambient Optimization | Voice Zoom2 | 2 Subwoofers Smart TV Features: Google TV | Watchlist | Ok Google | Google Play | Chromecast | Built In Mic | BRAVIA CAM Support | Variable Refresh Rate & Auto Low Latency Mode | Additional Features: Apple Airplay | Apple Homekit |Alexa | Gesture Control Display: XR Cognitive Processor | 4K HDR | 4K 120 | XR OLED Contrast Booster| XR Triluminos pro | XR Motion Clarity 65 inch Display Average OLED Screen 4K Resolution, 3840 x 2160 pixels Average 120 Hz Refresh Rate 178 ° Viewing Angle 2 USB Ports 3 HDMI Ports Screen Mirroring, Wifi, Bluetooth Cognitive Processor XR Processor Warranty:1 year Sony TV // Sony tv // Sony TV Sony Smart TV // Sony Smart TVS //Sony TVS Sony 55 Inch TV //Sony 55 Inches TV // 55 Inch //55 Inches //55 Inches TVs //55″ 4K UHD OLED TV //55" Inches // 55"//55'

Sony 55X90K 55 Inch Ultra HD 4K Smart LED TV Specification Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 120 hertz | BRAVIA XR Full Array LED Display: XR Cognitive Processor | 4K HDR | 4K 120 | XR Triluminos pro| XR 4K Upscaling | XR Motion Clarity Sound : 30 Watts Output | Acoustic Multi Audio | 5.1 Ch - 3D Surround Upscaling | Dolby Atmos | Ambient Optimization | Voice Zoom2 | 2 Tweeters Smart TV Features: Google TV | Watchlist | Ok Google | Google Play | Chromecast | Built In Mic | BRAVIA CAM Support | Variable Refresh Rate & Auto Low Latency Mode | Additional Features: Apple Airplay | Apple Homekit |Alexa | Gesture Control Connectivity: 4 HDMI ports to connect set top box, Blu Ray players, gaming console | 2 USB ports to connect hard drives and other USB devices Warranty:1 year Sony TV // Sony tv // Sony TV Sony Smart TV // Sony Smart TVS //Sony TVS Sony 55 Inch TV //Sony 55 Inches TV // 55 Inch //55 Inches //55 Inches TVs //55″ 4K UHD TV //55" Inches // 55"//55'

Sony 55X80K 55 Inch 4K UHD HDR TV Specifications Screen size: 55 inches HDMI inputs: 4 USB slots: 2 OS: Android TV Viewing Angle: X-Wide Angle Refresh rate: 50Hz Storage capacity: 16GB Warranty:1 year Sony TV // Sony tv // Sony TV Sony Smart TV // Sony Smart TVS //Sony TVS Sony 55 Inch TV //Sony 55 Inches TV // 55 Inch //55 Inches //55 Inches TVs //55″ 4K UHD HDR TV //55" Inches // 55"//55'

Sony 5555A80L 55 Inch OLED 4K Smart TV Specification UHD 4K 3840 x 2160 OLED Panel Google TV OS 120 Hz Native Refresh Rate Auto HDR Tone Mapping, ALLM & VRR Google Assistant & Chromecast Built-In Works with Alexa & Siri XR OLED Contrast Pro & XR 4K Upscaling For more information clickhere Warranty:1 year Sony TV // Sony tv // Sony TV Sony Smart TV // Sony Smart TVS //Sony TVS Sony 55 Inch TV //Sony 55 Inches TV // 55 Inch //55 Inches //55 Inches TVs //55″ 4K OLED TV //55" Inches // 55"//55'

Sony 50X75K 50 inch 4K Ultra HD Smart LED Google TV Specification Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 60 Hertz | 178 Degree wide viewing angle Connectivity: 3 HDMI ports to connect set top box, Blu Ray players, gaming console | 2 USB ports to connect hard drives and other USB devices Sound : 20 Watts Output | Open Baffle Speaker| Dolby Audio | Clear Phase Smart TV Features: Google TV | Watchlist | Voice Search | Google Play | Chromecast | Netflix | Amazon Prime Video | Additional Features: Apple Airplay | Apple Homekit |Alexa Display: X1 4K Processor | 4K HDR | Live Colour| 4K X Reality Pro | Motion Flow XR200 Warranty Information: 1 Year warranty provided by Sony from date of purchase >span class="a-list-item">Easy Returns: This product is eligible for replacement within 10 days of delivery in case of any product defects, damage or features not matching the description Warranty: 1 Year Sony TV // Sony tv // Sony TV Sony Smart TV // Sony Smart TVS //Sony TVS Sony 50 Inch TV //Sony 50 Inches TV // 50 Inch //50 Inches //50 Inches TVs //50″ 4K UHD TV //50" Inches // 50"//50'

Sony TV // Sony tv // Sony TV Sony Smart TV // Sony Smart TVS //Sony TVS Sony 43 Inch TV //Sony 43 Inches TV // 43 Inch //43 Inches //43 Inches TVs //43″ 4K UHD TV //43" Inches // 43"//43'

Get the TVGuard iS Original Voltage Protector for TV, Video, Hi-Fi, PABX, Fax Machines, Media Centres, Monitors & Electrical Equipment up to 6A online at Businessclaud Kenya and other Sollatek Surge Protectors on Businessclaud at the best price in Kenya ➤ Enjoy Free DELIVERY & Cash on Delivery available on eligible purchases.

Sollatek Voltage Stabiliser (SVS) Single Phase The Sollatek Voltage Stabiliser monitors the mains voltage continuously. If the voltage rises or drops, the SVS will stabilise the output to ensure the voltage reaching your equipment remains constant at 230V (+/-6%), within the operating range of the unit. If the input voltage falls below 142V or rises above 295V, the SVS will disconnect the output, thereby protecting the load. Once the mains voltage returns again within acceptable limits, the SVS will reconnect the output following a start-up delay. The SVS20/35/50/75 is wall mountable stabiliser with terminal input/output, for direct wiring and secure connectivity. KEY FEATURES Direct wire connection(Terminal) Wall mountable High voltage stablisation Low voltage stablisation Spikes/surges protection Power-back surges protection Basic Lighting protection AVS function Startup time delay +/- 6% stablisation Solid state PROVIDES PROTECTION AGAINST: High voltage Low voltage Spikes/surges Power-back surges Basic Lighting

Sollatek Voltage Stabiliser (SVS) Single Phase The Sollatek Voltage Stabiliser monitors the mains voltage continuously. If the voltage rises or drops, the SVS will stabilise the output to ensure the voltage reaching your equipment remains constant at 230V (+/-6%), within the operating range of the unit. If the input voltage falls below 142V or rises above 295V, the SVS will disconnect the output, thereby protecting the load. Once the mains voltage returns again within acceptable limits, the SVS will reconnect the output following a start-up delay. The SVS20/35/50/75 is wall mountable stabiliser with terminal input/output, for direct wiring and secure connectivity. KEY FEATURES Direct wire connection(Terminal) Wall mountable High voltage stablisation Low voltage stablisation Spikes/surges protection Power-back surges protection Basic Lighting protection AVS function Startup time delay +/- 6% stablisation Solid state PROVIDES PROTECTION AGAINST: High voltage Low voltage Spikes/surges Power-back surges Basic Lighting

Sollatek Voltage Stabiliser (SVS) Single Phase The Sollatek Voltage Stabiliser monitors the mains voltage continuously. If the voltage rises or drops, the SVS will stabilise the output to ensure the voltage reaching your equipment remains constant at 230V (+/-6%), within the operating range of the unit. If the input voltage falls below 142V or rises above 295V, the SVS will disconnect the output, thereby protecting the load. Once the mains voltage returns again within acceptable limits, the SVS will reconnect the output following a start-up delay. The SVS20/35/50/75 is wall mountable stabiliser with terminal input/output, for direct wiring and secure connectivity. KEY FEATURES Direct wire connection(Terminal) Wall mountable High voltage stablisation Low voltage stablisation Spikes/surges protection Power-back surges protection Basic Lighting protection AVS function Startup time delay +/- 6% stablisation Solid state PROVIDES PROTECTION AGAINST: High voltage Low voltage Spikes/surges Power-back surges Basic Lighting IDEAL FOR: All electrical and electronic equipment especially: TV, Video, Hi-Fi Computers, Fax machines and all office equipment. PABX, Satellite equipment, Fridges, Coolers, Freezers and Air conditioners.

Sollatek Voltage Stabiliser (SVS) Single Phase The Sollatek Voltage Stabiliser monitors the mains voltage continuously. If the voltage rises or drops, the SVS will stabilise the output to ensure the voltage reaching your equipment remains constant at 230V (+/-6%), within the operating range of the unit. If the input voltage falls below 142V or rises above 295V, the SVS will disconnect the output, thereby protecting the load. Once the mains voltage returns again within acceptable limits, the SVS will reconnect the output following a start-up delay. The SVS20/35/50/75 is wall mountable stabiliser with terminal input/output, for direct wiring and secure connectivity. KEY FEATURES Direct wire connection(Terminal) Wall mountable High voltage stablisation Low voltage stablisation Spikes/surges protection Power-back surges protection Basic Lighting protection AVS function Startup time delay +/- 6% stablisation Solid state PROVIDES PROTECTION AGAINST: High voltage Low voltage Spikes/surges Power-back surges Basic Lighting IDEAL FOR: All electrical and electronic equipment especially: TV, Video, Hi-Fi Computers, Fax machines and all office equipment. PABX, Satellite equipment, Fridges, Coolers, Freezers and Air conditioners.

The Sollatek SVS monitors the mains voltage continuously. If the voltage rises or drops, the SVS will stabilise the output to ensure the voltage reaching your equipment remains constant at 230V (+/-6%), within the operating range of the unit. If the input voltage falls below 142V or rises above 295V, the SVS will disconnect the output, thereby protecting the load. Once the mains voltage returns again within acceptable limits, the SVS will reconnect the output following a start up delay. PROVIDES PROTECTION AGAINST: * High-voltage * Low-voltage * Spikes and Surges * Power-Back Surges * Basic Lightning IDEAL FOR: All electrical and electronic equipment especially: TV, Video, Hi-Fi Computers, Fax machines and all office equipment. PABX, Satellite equipment, Fridges, Coolers, Freezers and Air conditioners.

Sollatek Voltage Stabiliser (SVS) Single Phase The Sollatek Voltage Stabiliser monitors the mains voltage continuously. If the voltage rises or drops, the SVS will stabilise the output to ensure the voltage reaching your equipment remains constant at 230V (+/-6%), within the operating range of the unit. If the input voltage falls below 142V or rises above 295V, the SVS will disconnect the output, thereby protecting the load. Once the mains voltage returns again within acceptable limits, the SVS will reconnect the output following a start-up delay. The SVS20/35/50/75 is wall mountable stabiliser with terminal input/output, for direct wiring and secure connectivity. KEY FEATURES Direct wire connection(Terminal) Wall mountable High voltage stablisation Low voltage stablisation Spikes/surges protection Power-back surges protection Basic Lighting protection AVS function Startup time delay +/- 6% stablisation Solid state PROVIDES PROTECTION AGAINST: High voltage Low voltage Spikes/surges Power-back surges Basic Lighting

Sollatek Voltage Stabiliser (SVS) Single Phase The Sollatek SVS monitors the mains voltage continuously. If the voltage rises or drops, the SVS will stabilise the output to ensure the voltage reaching your equipment remains constant at 230V (+/-6%), within the operating range of the unit. If the input voltage falls below 142V or rises above 295V, the SVS will disconnect the output, thereby protecting the load. Once the mains voltage returns again within acceptable limits, the SVS will reconnect the output following a start up delay. PROVIDES PROTECTION AGAINST: High voltage Low voltage Spikes/surges Power-back surges Basic Lighting IDEAL FOR: All electrical and electronic equipment especially: TV, Video, Hi-Fi Computers, Fax machines and all office equipment. PABX, Satellite equipment, Fridges, Coolers, Freezers and Air conditioners.

State of the art charge controller for loads up to 6 Amps DC. Microprocessor controlled mosfet based unit with 5 LED’s. Very low power consumption and PWM charging. Ideal for small lighting systems, billboards & animal feeding & supervision systems. FEATURES 12 and 24 volt versions available Tamper-proof fixed voltage thresholds (options available) Lightning protection Reverse polarity protected Overload protection with automatic re connection Reverse discharge prevention Low power consumption Pulse width modulation (PWM) charging technique Solid-state MOSFET technology Microprocessor controlled Status indication by 5 LEDs IDEAL FOR: Small lighting and power systems Billboard lighting Rural electrification Solar home systems Telemetry Remote monitoring and control Animal feeding and supervision systems 2 YEARS WARRANTY.

For loads up to 10Amps. A high efficiency low cost unit ideal for small lighting systems which may require to be expanded at a future date. Incorporates reverse polarity, lightning and overload protection. Adjustable voltage limits & four LED’s for clear status indication. As above but with additional features e.g., has a timer facility which makes it ideal for use in Solar systems for outdoor lighting. Current consumption is about 25% of the normal SPCC10. All “E” models have temperature compensation built-in and are field selectable for 12 or 24V operation. FEATURES: Field adjustable voltage threshold Reverse polarity protected Lightning protection Overload protection Low power consumption Four LEDs to show status Microprocessor controlled Description Small to medium appliances, home lighting systems & remote telemetry. Applications: Small/medium-sized applications Rural electrification Home lighting systems Beacons Remote telemetry

A 4 way plus 2 USB slots, 13 Amp protection strip with a 1.5m cable. It protects against spikes/surges and is ideal for all electronic appliances and is especially useful for computers and ideal for home use with video, TV, Hi-Fi etc.

Applications Suitable for any application that require power backup in case of power cuts. An ideal clean, safe and economic replacement to diesel generators and especially suited for applications where long battery runs may be critical; Bank ATMS Data centers Computers Telecom applications Medical applications Any critical electrical & electronic application Features: 3kVA online inverter Sinewave output Solid state technology Over voltage protection (400V continuous) Class II surge & spike protection Full stabilization with input voltage range : 110-300V Charger current : 40A System voltage : 48V Full LCD display SNMP (Simple Network Management Protocol) Wall mount enclosure

DSP-3P Sollatek DSP3P-0 Three phase Distribution Surge Protector Description Mains spike/surge protection Maximum surge current handling capabilities of 20KA per phase with a maximum let through voltage of 750Vac. Ideally suited to the protection of both entire distribution boards and equipment in domestic and industrial environments. Features LED indication of protection status and requires no operator intervention or maintenance. Available in single and three phase versions. Specification Max Surge Current 20kA Remote Connect No Terminals 6mm2 Weight 1 Phase: 580gm 3 Phase: 680gm Dimensions 205 x 135 x 55mm

Distribution Surge Protector (DSP) single phase. Maximum surge current handling capability of 20KA with a maximum let through voltage of 750VAC ideal for protection of entire distribution boards & equipment in industrial and domestic environments. Features LED Indication of protection status and requires no operator intervention or maintenance.

Over & Under Voltage Protection Protection against (on any or all phases): High voltage Low voltage Spikes/surges Powerback surges Loss or duplication of any phase Ideal for: 3 phase air conditioning Industrial refrigeration Industrial plants and machinery Max power: Controls an external 3 phase controller or contractor of any size Wait time: User adjustment from 10 secs to 10 mins Description Protects from over voltage and under voltage on any one of the three phases as well as loss of one or more phases. Indication and/or disconnection as a result of mains frequency error or phase sequence error is available as an option. Unlike the AVS303, the AVS3P-0 is designed to operate an external control circuit or contactor which may be part of a motor starter or other equipment. The AVS3P-0 has a volt-free changeover contact as an output. Specification Max Power Controls an external 3 phase controller or contactor of any size Wait Time Adjustable from 10 seconds to 10 minutes Ideal For 3 phase air conditioning, industrial refrigeration and industrial plants and machinery Weight 500gm Dimensions 205 x 132 x 53mm

AVS30 Over & Under Voltage Protection for Whole Buildings, Air Conditioners, Freezers, Fridges & Coolers Protect against: High voltage Low voltage Spikes/surges Powerbacks surges Loss Of Neutral (LoN) Ideal for: Air conditioners Large fridge/freezers Whole office Complete circuits Max power: 30 amps Wait time: User adjustable from 10 seconds to 10 minutes

Low power (under-voltage) will damage any refrigeration appliance’s compressor and High Power (Over voltage) will damage any electrical or electronic equipment. The AVS15 is the most complete power protection device combining over-voltage, under-voltage, power-back surges and spikes/surge protection. Additionally, there is a delay when power returns to normal. This will ensure that the appliance is not switched on-off repeatedly during fluctuations nor it is subjected to a massive surge normally experienced when power returns after power cuts. Furthermore, the New Sollatek AVS15 Micro version has enhanced features allowing the user to set the delay time and monitoring the state of the voltage. The new models of the AVS15 also have a frequency detection feature. If the mains frequency strays outside an acceptable range (and thus could be damaging to your equipment) the AVS will disconnect the power and the two Red LEDs (low & high voltage) will start flashing. Once the frequency returns to normal, the AVS will reconnect automatically after the pre-set delay. This Frequency detection feature is present in AVS15 with serial numbers equal or great than 010-100-1101. PROVIDES PROTECTION AGAINST: Over-voltage Under-voltage Spikes and Surges Power-Back Surges

AVS100 Over & Under Protection Protection against: High voltage Low voltage Spikes/surges Powerback surges Ideal for: Air conditioners Large fridge/freezers Whole office Max power: 100 amps Wait time: User adjustable from 10 seconds to 10 minutes Description Low power (under-voltage) will damage any refrigeration appliance’s compressor and High Power (Over voltage) will damage any electrical or electronic equipment. The AVS100 is the most complete power protection device combining over-voltage, under-voltage, power-back surges and spikes/surge protection. Additionally, there is a delay when power returns to normal. This will ensure that the appliance is not switched on-off repeatedly during fluctuations nor it is subjected to a massive surge normally experienced when power returns after power cuts. Model Product Code AVS100 91100000

6.9 kVA / 30 amps. When used with an AVS30 on the output, this unit provides the ultimate protection for delicate electronic equipment in areas of persistent high, low or fluctuating voltage. 2 YEAR WARRANTY.

DESCRIPTION: The Sollatek AVR is a state of the art solid state stabiliser. Using microprocessor technology, the AVR will rapidly detect voltage variations and correct the output to ensure 230V (+/-4%) supply. The Sollatek AVR has a very wide input range (-30% to +22%) and a voltage correction speed of 1250Volts per second. No mechanical parts means that the AVR doesn’t require maintenance and will not be affected by dusty environments as other mechanical (for example Servo type) stabilisers. PROVIDES PROTECTION AGAINST: High voltage Low voltage Spikes/surges Basic Lightning NB 4.6 kVA / 20 amps. When used with an AVS30 on the output, this unit provides the ultimate protection for delicate electronic equipment in areas of persistent high, low or fluctuating voltage.

AVR 3 Phase L-Series 20-200Amps The AVR L-Series is a solid state stabiliser, micro-processor technology controlled range. At the heart of the unit is an advanced microcomputer ensures accurate control of outage voltage to the load providing a host of advanced features. Input Range +/-20% (extended range available) Fully electronic, solid state with no moving parts Digital display: input and outage voltage, output current DSP Class II surge protection Wide input frequency tolerance allowing unit to function properly in areas of severe voltage disturbances ADM (Advanced Display Module) 7″ full-colour touchscreen module Web-based portal for monitoring through trusted local network Displays live and historic operational data including; input/outpt voltages, output current and transformer & thyristor temperatures Network connectivity through Ethernet and Wi-Fi Access to events logs via LAN, USB or directly on screen Displays operational status at first glance

Input Input voltage 230/400V, -30%, +22%. Maximum Input Current 3x50 amps (at 100% load and maximum boost). Frequency Range 45Hz to 75Hz (i.e 50Hz –10%, +50%. or 60Hz –25%, +25%). Additional Voltage THD 0.2% at input (tested at 100% linear load), (No PWM methods used). Maximum Input THD Can withstand >10% THD from the supply. Output Output voltage 230/400V, +/- 4%. Maximum Output Current 3 x 33 amps. Maximum Output Power 22.5 kVA. Correction time 20 m sec (0 to 100% load). Additional Voltage THD 0.25% at output (tested at 100% linear load), (No PWM methods used). Crest Factor > 1: 3 permissible on load current (tested at 100% load). Synchronization Output synchronized to input. Permissible Overload 1000% for 100ms, 150% for 4 minutes, 110% for 10 minutes. Load Types Designed to run lighting, motors, battery chargers, communications equipment, offi ce equipment, SMPS, air- conditioners, compressors, industrial machines, medical equipment and others. Suitable for all domestic, commercial and industrial sites. General Isolation Transformer Connected at input. Delta primary plus earth, 4 wire. Star secondary plus earth, 5 wire. Inter-winding screen earthed at input. Circuit Breakers Input and output circuit breakers to protect against overload and short circuit to both the AVR and the load. Voltage Protection AVS Automatic over and under voltage protection and adjustable re-connect delay, c/w fi ve status LED indicators. Protects load from extreme supply voltage and AVR malfunction. Output Alarm Visual indicator and volt-free contacts if AVR output fails for any reason. By-Pass Automatic by-pass to run load direct from utility power if AVR needs to be taken out of service for any reason. Status indicators for each phase. Technology All solid state (static) switching. Effi ciency AVR: >98%. Isolation transformer: >97% average, >95% worst case Control Microcontroller based control system provides self checks, system integrity monitoring and diagnostic indicators. Control Protection Internal surge arrestors and fi lters in control circuit protect against disturbances. Filtering algorithms and fault tolerant software protect against disturbances and false measurements. Power Connections Supply phases and earth. Load phases, neutral and earth. Surge Protection Heavy duty input and output surge arrestors to protect against extreme surges and lightning on the supply. Class II protection, 20kV, 1.2/50us, 45kA max surge current. Response time 20ns. With status indicators. RFI/EMI Filter AVR is equipped with RFI/EMI fi ltering for proper operation of the unit. Ambient Temperature Range -5 to +35ºC. Relative Humidity >95%, non-condensing. Environmental Protection IP20. Acoustic Noise 45 dB (A). Expected Service Life > 25 years 130kg weight

20 kVA / 85 amps. This unit provides the ultimate protection for delicate electronic equipment in areas of persistent high, low or fluctuating voltage. 2 YEAR WARRANTY. (New Model)

Over & Under Voltage Stabilization Protection for Medical Equipment, Buildings, Factories, Computers, Telecom Units & Satellites/VSAT Automatic Voltage Regulator-20-400A Protection against: High voltage Low voltage Spikes/surges Basic Lightning

Over & Under Voltage Stabilization Protection for Medical Equipment, Buildings, Factories, Computers, Telecom Units & Satellites/VSAT Automatic Voltage Regulator-20-400A Protection against: High voltage Low voltage Spikes/surges Basic Lightning

Sollatek’s high efficiency solar modules comprise of polycrystalline cells built into a reinforced anodized aluminum frame. A Tedlar base is used and the solar cells are protected by tampered glass and a high strength polymer sheet at the front and rear respectively. These modules are fully sealed against moisture, protected by 2 Schottky by-passed diodes and conform to Kenyan standards KS1674:2003. It has 80 Watts power output. 10 YEAR WARRANTY.

Over & Under Voltage Protection PROTECTS AGAINST Over voltage Under voltage Surges/spikes Powerback surges IDEAL FOR TV Video Hi-Fi PABX Fax machines Domestic freezers Electronic equipment up to 7 amps Max current : 7 amps Wait time : User adjustment 3 minutes or 30 seconds Specification Max Power 7 Amps (6A Indian) Wait Time User adjustable 30 Sec OR 3 Min Ideal For TV, Video, Hi-Fi, PABX, Fax machines, Fridges, domestic freezers and all electronic equipment up to 7 amps Weight 190 gm Dimensions 140 x 60 x 90mm

Protects electronic products, including TV, video, fax, PABX, hi-fi etc., from high voltage and spikes. Cuts power at 260V and reconnects 30 seconds after resumption of good power. The short time delay avoids inconvenience while watching TV. Now with isense™ and Timesave™.

Low power (under-voltage) will certainly damage any refrigeration appliance’s compressor. The FridgeGuard protects your appliance by disconnecting the power when it goes below an unacceptable level. Additionally, there is a delay when power returns to normal. This will ensure that the appliance is not switched on-off repeatedly during fluctuations nor it is subjected to a massive surge normally experienced when power returns after power cuts. PROVIDES PROTECTION AGAINST: Under-voltage Spikes and Surges Power-Back Surges IDEAL FOR: Fridges, freezers, coolers. All up to 6 Amps maximum

Sollatek’s high efficiency solar modules comprise of polycrystalline cells built into a reinforced anodized aluminum frame. A Tedlar base is used and the solar cells are protected by tampered glass and a high strength polymer sheet at the front and rear respectively. These modules are fully sealed against moisture, protected by 2 Schottky by-passed diodes and conform to Kenyan standards KS1674:2003. It has a 60Watts power output. 10 YEAR WARRANTY.

Sollatek’s high efficiency solar modules comprise of polycrystalline cells built into a reinforced anodized aluminum frame. A Tedlar base is used and the solar cells are protected by tampered glass and a high strength polymer sheet at the front and rear respectively. These modules are fully sealed against moisture, protected by 2 schottsky by-passed diodes and conform to Kenyan standards KS1674:2003. Provides 50 watts maximum power. 10 YEAR WARRANTY.