Electronics

Customize your living space on the fly and save energy at the same time with Tronic Isolator 3 Pole 100Amp. Set the right mood in any room using LED/CFL dimmers, standard incandescent dimmers, rotary dimmers, fan control dimmers, and in-line lamp dimmers. Alter your ambiance with ease for a customized, energy-saving style.

Colour: Grey Amps: 100Amps Voltage: AC 415V Dimensions: Height 350mm x Width 455mm Material: Aluminium Additional Information: CRCA Sheet (Door 1.2 mm & Body 1.6mm) 63A to 800A CRCA Sheet (Door 1.6mm & Body 2.0mm)1000A to 3150A 2 External earthing points on each side Wall mounted with 4 bolts Door locking system allows opening of door only in OFF position Incoming & outgoing easily interchangeable at site Coating of epoxy polyester powder 70 micron Removable plate top & bottom Door with solid hinges Warranty: 1 Year

TheTronic Distribution Board 10Way Sp Complete Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. These load centers are designed for the value-minded contractors, remodelers, builders and homeowners and are engineered for fast installation and wire savings.

TRONIC Intelligent Digital A.C Voltage Stabilizer adopts lead-edge digital technologies, sampling, analyzing and controlling. The function of stabilization and protection to accomplish full functions and precise movements and reliable operations. Its beautiful streamline outlook reveals its good taste, where as the cool color screen reveals rich in formation. The selectable function makes the design more humanized. Therefore, it is a friendly guardian for office, medical centers, communication and testing devices as well as home appliances.

Tronic LED bulkhead a simple yet stylish only requires screws to mount the lamp on the ceiling or wall and no bulbs are needed making it convenient and user friendly. It has a large light-emitting surface that instantly turns on without flickering. The PVC lampshade would lower the transmittance of lighting which can protect your family's eyes from glare lighting. IP54 rating means it is protected from dust and splashing water.

Power Device Type: UPS| UPS Technology: line-interactive| Voltage Output: AC 220/230/240 V| Voltage Input: AC 220/230/240 V| Circuit Protection: Circuit breaker| Power Device / Form Factor: External| Features: Audible alarm, emergency power off, Automatic Voltage Regulation (AVR), LED indicators; Cables Included 3 x power cable| Width: 17.5 Inch| Depth: 19 Inch| Height: 3.5 Inch| Compliant Standards: CE, FCC Class A certified, TUV GS, GOST, SASO, RoHS| Enclosure Color: Attractive black Power Provided (W): 1.6 KW| Power Provided (VA): 2200 VA| Surge Suppression: Standard| Battery Type: UPS Battery| Battery Technology: Lead-acid| Battery Form Factor: Internal| Battery / Run Time: 6 min at full load| Interfaces & Connections: 1 x management - USB - 4 pin USB Type B, 1 x management - RS-232 - 9 pin D-Sub (DB-9)| Input Connector(s): 1 x power IEC 320 EN 60320 C20| Output Connector(s): 8 x power IEC 320 EN 60320 C13| Product Line: Tripp Lite SmartPro

7.7kW Single-Phase Switched PDU with LX Platform Interface, 230V Output, IEC 309 32A Blue, 10 ft. (3.05 m) Cord, 0U, TAA0U PDU distributes, monitors and manages single-phase power in an IT or industrial environment. Features. 20 C13 and 4 C19 230V outlets distribute clean power to connected rack equipment Pre-installed WEBCARDLX with latest version of PADM20 for IP-based Auto Probe feature Remote power monitoring and control reduces on-site visits and maintenance costs 10-ft. (3.05 m) power cord with IEC 309 32A Blue (2P+E) input connects to compatible AC source Digital ammeter for on-site load monitoring helps prevent power overloads 2-year limited warranty

Maintains usable 230V nominal output to sensitive electronics during severe brownouts and overvoltages. Prevents surges and spikes from damaging circuitry. Filters out potentially disruptive line noise. Ideal for computers, routers, modems and home theater components Corrects under- and overvoltages in 189V–247V range Protects against spikes with 340 joules of surge suppression Monitors power status with front-panel diagnostic LEDs Features 3 IEC-320 C13 rear outlets 2-year limited warranty

SmartOnline 208/230V 3kVA 2.7kW Double-Conversion UPS, 2U Rack/Tower, Extended Run, Network Card Slot, LCD, USB, DB9, ENERGY STAR Features Protects Mission-Critical Rack-Mounted Equipment Converts AC input to DC power, then DC to fully regulated sine wave AC output +/-2% voltage regulation in online and battery modes Selectable 200/208/220/230/240V output voltage 3000VA/2700W capacity 2 C19 and 8 C13 outlets 570-joule surge suppression rating Supports tower installation with 2-9USTAND accessory Interactive Front-Panel LCD Reports detailed status information, including load and battery levels Offers advanced configuration options, including output voltage and power strategies 5 Power Strategies Auto Adaptive enables high efficiency and high-quality operation as necessary for ideal equipment protection Max Efficiency favors economy operation with high 95% efficiency Max Quality favors on-line, double-conversion mode, maintaining +/-2% output voltage regulation and zero transfer time Frequency Regulation and Frequency Conversion enable +/-0.05 Hz output regulation for selected frequency (50/60 Hz) Reliable, Expandable Battery Backup Supports half load (1350W) for 13.5 min. and full load (2700W) for 5 min. Add external battery packs for extra runtime “Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed and configured during replacement Full 2700W capacity available with and without external battery packs Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteries Highly Customizable Customize communications and behavior to integrate with device makers’ specific needs Selectable auto-restart from 0 to 60 sec. after AC power is restored Selectable minimum battery charge level before auto-restart Schedule system reboot if USB signal from connected device is lost Set overload thresholds and low battery levels for alert and shutdown Remote on/off (toggle) support via DB9

UPS Type: On-Line Rated input current (Maximum Load): 4.9A 220V; 4.7A 230V; 4.5A 240V Nominal Input Voltage(s) Supported: 220V AC; 230V AC; 240V AC Nominal Input Voltage Description: 230V factory default UPS Input Connection Type: C14 inlet Input Circuit Breakers: 10A Input Phase: Single-Phase Output Volt Amp Capacity (VA): 1000 Output kVA Capacity (kVA): 1 Output Watt Capacity (Watts): 900 Output kW Capacity (kW): 0.9 Nominal Output Voltage(s) Supported: 220V; 230V; 240V Battery Type: Valve Regulated Lead Acid (VRLA) Full Load Runtime (min.): 4.8 min. (900w) Half Load Runtime (min.): 12.8 min. (450w) Expandable Battery Runtime: Extended runtime supported via optional external battery packs External Battery Pack Compatibility: BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible) DC System Voltage (VDC): 24 Battery Recharge Rate (Included Batteries): Less than 6 hours from 10% to 90% (typical, full load discharge) Voltage Regulation Description: Online, double-conversion power conditioning Overvoltage Correction: 2% output voltage regulation during overvoltages to 280 Undervoltage Correction: 2% output voltage regulation during undervoltages to 80V (50% load), 175V (100% load) Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional information Switches: ON switch supports inverter-on, battery-test, alarm-off and enter functions; OFF switch supports inverter-off and fault-clear functions; SETUP switch enables scroll-down and enter setup-mode functions Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available Audible Alarm: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions Cooling Method: Fan Shipping Weight (kg): 12.43 UPS Power Module Weight (kg): 9.66

SmartOnline 230V 1kVA 800W Double-Conversion UPS, 2U Rack/Tower, Extended Run, Network Card Options, USB, DB9 Serial, Half Load 12 Min, Full Load 4 Min

10kVA/10,000VA/9000W on-line double-conversion UPS; 0.9 power factor 200/208/220/230/240V 50/60Hz output; Economy mode option 6U Rack / Tower compatible; Hot-swappable power and battery modules USB, RS232 & EPO ports; slot for optional Network Management Cards Front panel LEDs with detailed LCD monitoring and control screen Expandable runtime with optional external battery packs Hardwire input (3 wire); Hardwire output (3 wire) 2-year limited warranty Tripp Lite SU10KRT3UHV 10kVA/10,000VA/9000 watt on-line, double-conversion UPS system in 6U total rack/tower configuration (3U UPS power module and 3U external battery pack) Detachable PDU with manual bypass switch enables hot-swappable UPS power module replacement with no interruption in output power to connected networking equipment Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions Hardwire input (3 wire) and hardwire output (3 wire) connections Supports North American (L1,L2,G) 208/240v hardwire input / output, plus International 230/220/240v (L,N,PE) hardwire input / output Optional SU6000XFMR2U transformer offers 120v output in North American 208/240V (L1,L2,G) input configurations Maximum installed rack depth of only 32.5 in. / 82.6cm Full-time active power conditioning provides clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise Double-conversion operation converts raw input from AC to DC, then resynthesizes output power back to perfect sine wave AC with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types Maintains full-time sine wave output within 2% of selectable 200/208/220/230/240V nominal during brownouts as low 100V and overvoltages as high as 300V Supports 50/60Hz operation for worldwide frequency compatibility Expandable runtime is supported with optional BP240V10RT3U; BP240V787C-1PH external battery packs Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual) Intelligent battery management system with temperature-compensated charging extends battery life Highly efficient operation in optional economy mode significantly reduces BTU heat output and operating energy costs Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from Businessclaud.com HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD, MODBUSCARD and RELAYIOCARD Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification (requires removal of USB interface module) Supports Emergency Power Off (EPO) via built-in interface Included rail kit supports 6U 19 inch rackmount installation in 4 post racks Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks Front panel LEDs and LCD readout with scroll controls and password option supports visual monitoring of all major UPS functions and advanced UPS settings for charge level, nominal voltage selection, frequency conversion and other operational parameters LED / LCD display panel rotates for viewing in rackmount or tower configurations Network-grade AC surge and noise suppression Industrial mode option (factory preset) enables supports high current startup loads by momentarily switching to bypass mode in response to short duration overload conditions Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating) External battery packs are field replaceable and hot swappable

SmartPro 230V 750VA 500W Line-Interactive Sine Wave UPS Tower, Network Card Options, USB, DB9 Serial. C14 input; 6 C13 outlets; Includes 2 C13 to C14 cables - 15 minutes at half load (325VA/250 watts) and 5 minutes at full load (750VA/500 watts)

SmartPro 230V 500VA 300W Line-Interactive UPS, 1U Rack/Tower Network Card Options, USB, DB9 Serial, Half Load 17Min, Full Load 5 Min, PDU Integration Capability - C14 input; 7 C13 outlets; 2 C13 to C14 cables

Tripp Lite SMX3000XLRT2UA line interactive 2U rack/tower UPS with 3000VA / 3kVA capacity and extended runtime options Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltage's from 158 to 278V C20 AC power inlet; 8 C13 and 1 C19 output receptacles, two independently switchable output load banks Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltage's High 98% efficiency rating in line-power mode offers reduced power consumption and BTU emissions

SmartPro rack 230V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS, 2U, Extended Run, SNMPWEB CARD Options, Rack mount, LCD, USB, DB9

SmartPro 230V 1.5kVA 900W Line-Interactive UPS, Tower, LCD, USB, 8 Outlets. 10 min. runtime at half load. - Cold-start capability enables turn-on in battery mode during blackouts

Corrects under- and overvoltages from 144V to 282V 8 C13 outlets Interactive LCD monitoring screen Monitoring of power conditions via PowerAlert software 12 min. runtime at half load; 4.5 min. at full load SmartPro 230V 1.5kVA 900W Line-Interactive UPS, 2U Rack/Tower, LCD, USB, DB9, 8 Outlets. 12 min. runtime at half load; 4.5 min. at full load - Tower/rack mounting hardware

SmartPro 230V 1.05kVA 650W Line-Interactive Sine Wave UPS, Tower Network Card Options, USB, DB9, 8 Outlets. 20 min. runtime at half load; 7 min. at full load

SmartPro 230V 1kVA 900W Line-Interactive Sine Wave UPS, 2U Rack/Tower, Network Card Options, LCD, USB, DB9, 6 Outlets

SmartPro 230V 1kVA 500W Line-Interactive UPS, Tower, LCD, USB, 6 Outlets - Corrects under- and overvoltages from 171V to 266V 6 C13 outlets—3 surge-only Interactive LCD monitoring screen - 11 min. runtime at half load; 3 min. at full load

3kVA 3000VA USB, RS232, EPO and slot for Network Management Card options; C20 inlet; C13

Tripp lite power extension 6way

3.7kW Single-Phase 208/230V Monitored PDU - LX Platform, 18 C13, 2 C19 Outlets, C20 / L6-20P Inputs, 0U 900mm Height, TAA

Local Metered single phase 32A 230V 2U horizontal rackmount PDU Set of 2 current meters reports current in amps for each output load bank Attached 12-ft. (3.66 m) cord with IEC-309 32A (2P+E) input plug 18 total 230V outlets (2 C19, 16 C13) Reversible housing, 12.5 in. / 31.75cm depth TAA Compliant 2-year limited warranty

Single phase 16A 200-240V Auto Transfer Switch / ATS PDU Enables redundant-power option for single-corded network devices Separate primary & secondary inputs connect to any two compatible power sources 1U horizontal rackmount; 2 C20 inputs; 8 C13 and 2 C19 outlets Two digit visual current meter; Upgrade options available Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases 2-year limited warranty

with 8 C13 Outlets - AVR, 230V, C14 Inlet, LCD, USB, Towe

mniVS 230V 1000VA Line-Interactive UPS, Tower Model with AVR Functionality - Supports entry level PCs up to 60 minutes during blackouts to enable shutdown without data loss - 6 IEC320 C13 outlets with complete AC surge suppression

Specifications OVERVIEW UPC Code 010-100-110122 OUTPUT Nominal Output Voltage(s) Supported 230V Frequency Compatibility 50 Hz Output Receptacles (2) Universal outlets Output (Watts) 750 Continuous Output Capacity (Watts) 750 Peak Output Capacity (Watts) 1500 Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%). Output Frequency Regulation 50 Hz (+/- 0.3 Hz) Overload Protection Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads INPUT Nominal Input Voltage(s) Supported 230V AC Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 100A minimum battery system fusing is recommended. AC INPUT: 230VAC Maximum Input Amps / Watts DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions) Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection Voltage Compatibility (VAC) 230 Voltage Compatibility (VDC) 12 BATTERY Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries DC System Voltage (VDC) 12 Battery Pack Accessory (Optional) 98-121 sealed lead acid battery (optional) Battery Charge Selectable 5 / 20 amp with 1/2 cycle (10 ms) transfer time Expandable Runtime Yes USER INTERFACE, ALERTS & CONTROLS Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences. Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads. SURGE / NOISE SUPPRESSION AC Suppression Joule Rating 1020 PHYSICAL Shipping Dimensions (hwd / cm) 31.50 x 26.67 x Businessclaud.com shownipping Weight (kg) 9.30 Unit Dimensions (hwd / cm) 17.78 x 22.23 x 22.86 Unit Weight (kg) 8.44 Cooling Method Multi-speed fan Material of Construction Polycarbonate Form Factors Supported Mounting slots enable permanent placement of APSX750 on any horizontal surface (see manual for additional mounting information) ENVIRONMENTAL Relative Humidity 0-95% non-condensing LINE / BATTERY TRANSFER Transfer Time (Line Power to Battery Mode) Transfer time from line power to battery mode: 10 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications) Low Voltage Transfer to Battery Power Low voltage transfer to battery power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual) High Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272 CERTIFICATIONS Certifications RoHS Compliant WARRANTY Product Warranty Period (International) 2-year limited warranty

6000W APS X Series 48VDC 208/230V Inverter/Charger with Pure Sine-Wave Output, AVR, Hardwired MODEL NUMBER: APSX6048VRNET Highlights Delivers pure sine-wave AC power from AC or DC source ● 6000W continuous output power; 12000W peak power ● Auto-transfer switching option for UPS operation ● DB9 port for optional SNMPWEBSOLOHV network management ● Corrects brownouts and overvoltages without using battery power ● Package Includes APSX6048VRNET 6000W APS X Series 48V DC 208/230V AC Inverter/Charger ● ● Owner’s manual Description The APSX6048VRNET 6000W APS X Series 48V DC 208/230V AC Inverter/Charger is a reliable power source for a wide variety of power tools, computers, audio/video components and other sensitive electronics at mobile, emergency and remote sites. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power. The DC-to-AC pure sine-wave inverter delivers clean power to sensitive electronics. Its automatic line-tobattery transfer switch and integrated charging system allow the unit to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 6000W of continuous power, 9000W up to one minute or 12000W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage. Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, the APSX6048VRNET converts stored power from a 48V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime in heavy-load conditions. When hardwired to an external 208V or 230V AC source, the unit keeps the user-supplied battery charged via a three-stage 23/90A selectable charging system while simultaneously delivering conditioned, pure sine-wave AC power to connected equipment. When used as a UPS, the APSX6048VRNET responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived, pure sine-wave AC power. The optional SNMPWEBSOLOHV accessory card enables remote monitoring of the unit via SNMP, Sprice shown Telnet, and Internet. Features Reliable Power for Mobile, Emergency and Remote Sites ● Generates 208/230V pure sine-wave power from 48V battery bank Ideal for powering variable-speed tools, computers, LEDs, fans, audio/video components and other sensitive electronics ● ● Designed for easy installation in RVs, fleet vehicles and emergency vehicles ● Functions as vehicle inverter, standalone AC power source or extended-run UPS ● Unlimited runtime with variety of user-supplied batteries 6000W of continuous power ● 9000W of reserve power up to 1 min. 12000W of peak power up to 10 sec. to accommodate surge power demands during equipment startup and cycling ● ● Automatic overload detector, cooling fan and resettable AC circuit breaker protect unit from damage ● High-current DC input terminals for simple hardwired installation Automatic Voltage Regulation Corrects brownouts and overvoltages without using battery power during battery charging and UPS standby modes ● Remote Monitoring Capability ● DB9 port for optional SNMPWEBSOLOHV, which turns the unit into a monitored network device ● Enables network monitoring via SNMP, Sprice shown Telnet, or the Internet Automatic Transfer Switching ● Transfer relay switches to inverter power during blackout in 10 or 20 ms ● DIP switches configure high and low voltage auto-transfer 3-Stage 23/90A Selectable Battery Charger Serves as battery charger when external 208V or 230V AC power is supplied and powering connected equipment ● ● Protects battery from overcharging and overdischarging ● Low-battery protection prevents excessive battery depletion ● DIP switches configure wet/gel charging profiles

3000W APS X Series 24VDC 230V Inverter/Charger with Pure Sine-Wave Output, Hardwired MODEL NUMBER: APSX3024SW Highlights Delivers pure sine-wave 230V AC power from AC or DC source ● 3000W continuous output power; 6000W peak power ● Auto-transfer switching option for UPS operation ● Protects against blackouts, surges and EMI/RFI line noise ● Rugged steel housing resists moisture and impact ● Package Includes APSX3024SW 3000W APS X Series 24V DC 230V AC Inverter/Charger ● ● Owner’s manual Description The APSX3024SW 3000W APS X Series 24V DC 230V AC Inverter/Charger is a reliable power source for a wide variety of power tools, computers, audio/video components and other sensitive electronics at mobile, emergency and remote sites. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power. The DC-to-AC pure sine-wave inverter delivers network-grade power to sensitive electronics. Its automatic line-to-battery transfer switch and integrated charging system allow the unit to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 3000W of continuous power, 4500W up to one minute or 6000W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage. Designed for easy installation in RVs, commercial and fleet vehicles and emergency vehicles, the APSX3024SW converts stored power from any 24V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime. When hardwired to an external 230V AC source, the unit keeps the user-supplied battery charged via a three-stage 23/90A selectable charging system while simultaneously delivering AC power to connected equipment. When used as a UPS, the APSX3024SW responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived AC output. LEDs on the unit indicate load percentage and battery charge level. Features Reliable Power for Mobile, Emergency and Remote Sites ● Generates 230V pure sine-wave power from 24V battery bank Ideal for powering variable-speed tools, computers, LEDs, fans, audio/video components and other sensitive electronics ● Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment ● ● Functions as vehicle inverter, standalone AC power source or extended-run UPS ● Unlimited runtime with variety of user-supplied batteries 3000W of continuous power ● 4500W of reserve power up to 1 min. 6000W of peak power up to 10 sec. to accommodate surge power demands during equipment startup and cycling ● Automatic overload detector, built-in cooling fan and resettable AC circuit breakers protect unit from damage ● ● High-current DC input terminals for simple hardwired installation

APS2012SW Product Summary Heavy-duty Inverter/ Charger ideal for automotive, RV, residential, industrial or commercial applications. Pure sine wave AC power from an AC or DC power source. 2000 watts continuous output power; up to 4000 watts peak power. Auto transfer switching option for battery backup (UPS) operation. Protection against blackouts, surges, line noise and unstable voltages. Easy installation and optional remote control capability. 2-year warranty What’s in the Box APS2012SW 2000W PowerVerter APS 12V DC 120V AC Inverter/Charger Owner’s Manual

ripp Lite APSX1250 Product Summary Generates safe, stable, computer-grade 230V AC power from 12V battery bank Ideal for powering tools, saws, motors, portable lighting, small appliances and computer equipment in heavy-load conditions Designed for easy installation in RVs, over-the-road trucks, fleet vehicles and conversion vans Functions as a vehicle inverter, standalone AC power source or extended-run UPS Features dual C13 outlets Unlimited runtime with variety of user-supplied batteries Automatic overload detector, built-in cooling fan and resettable AC circuit breakers protect unit from damage Transfer relay switches to inverter power during blackout in 10 ms 2-year warranty What’s in the Box APSX1250 1250W PowerVerter APS 12V DC 230V AC Inverter/Charger Owner’s Manual

Specification Tripp Lite 2400W APS INT 24VDC 230V Inverter / Charger w/ Auto Transfer Switching ATS Hardwired DC to AC power inverter + battery charger 2400W Device Type DC to AC power inverter + battery charger - external Weight 17.3 kg Input Voltage AC 230 / DC 24 V Output Voltage AC 230 V Power Capacity 2400 Watt Input Connectors Hardwire Dimensions (WxDxH) 21.59 cm x 41.28 cm x 18.42 cm Extended Specification General Colour Black Device Type DC to AC power inverter + battery charger - external Dimensions & Weight Depth 41.28 cm Height 18.42 cm Weight 17.3 kg Width 21.59 cm Dimensions & Weight (Shipping) Shipping Weight 19.5 kg Environmental Parameters Humidity Range Operating 0 - 95% (non-condensing) Expansion / Connectivity Interfaces 1 x monitoring Miscellaneous Compliant Standards RoHS Features LED indicators, overload protection, Automatic Transfer Switch (ATS), cooling fan Power Device Circuit Protection Circuit breaker Frequency Provided 50 Hz Frequency Required 50 Hz Input Connectors Hardwire Input Voltage AC 230 / DC 24 V Output Voltage AC 230 V 50 Hz Output Waveform Sinewave Power Capacity 2400 Watt

Tripp Lite APSINT2012 Product Summary Converts DC power from a 12V vehicle battery bank into 230V AC power Terminal and hardwire input/hardwire output Automatic line-to-battery transfer switch and integrated charging system allow unit to work as a vehicle inverter, standalone AC power source or extended-run UPS 2000W continuous/4000W peak output power Six front-panel diagnostic LEDs Rugged, moisture-resistant, polycarbonate housing withstands vibration, impact and high-humidity environments Optional remote control capability with APSRM4 accessory (sold separately) One-year domestic/two-year international warranty What’s in the Box APSINT2012 PowerVerter® Inverter/Charger with ATS Owner’s Manual

AVR Series 230V 750VA 450W Ultra-Compact Line-Interactive UPS with USB port, C13 Outlets (C14 inlet and 6 C13 outlets - 3 UPS battery supported outlets, 3 surge-only outlets)

Technical specifications Output Volt Amp Capacity (VA): 2200 Output Watt Capacity (Watts): 1600 Nominal Output Voltage(s) Supported: 200V; 220V; 230V; 240V Topology: Smart Online Waveform: Sine wave Indicators: 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in rack/tower formats Alarms: Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions Outlets: (4) C13; (2) C19 Rackmountable: 2U Ports: USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface Warranty: 1 year warranty Click here to read more details about this product.

The Tripod Projector Screen 200x200 cm Portable – Model TPS200 is a versatile projection solution designed for homes, schools, offices, and outdoor events in Kenya. With its large 200x200 cm display area and sturdy tripod stand, it delivers a clear and professional viewing experience.

Get the Triple Chafing Dishes Food Warmer online at Businessclaud Kenya and other Generic Electronic Systems on Businessclaud at the best price in Kenya ➤ Enjoy Free DELIVERY & Cash on Delivery available on eligible purchases.

Triopo KX55cm SOFTBOX universal for Godox V1 Material: Nylon material, Aluminum shaft Size: Diameter: 65cm Color: Black/Silver Shape, Octagon

Triopo 90cm 35″ Deep Octagon Umbrella Speedlite Softbox with Flash Bracket Material: Nylon material, Aluminum shaft Size: Diameter: 90cm Color: Black/Silver Shape, Octagon Weight (kg): 0.42

Triopo 120cm 47″ Deep Octagon Umbrella Speedlite Softbox with Flash Bracket Material: Nylon material, Aluminum shaft Size: Diameter: 120cm Color: Black/Silver Shape, Octagon Features & Benefits Material Aluminum Nylon Color Black/Silver General Diameter 120cm

This mosquito killer is intended to destroy flying insects that come into touch with it. Mosquitoes are electrocuted upon contact with the fireproof and ABS material, which has no offensive odor and is non-toxic and safe for humans. The interior grid is walled with an ABS housing to prevent children and animals from touching the device's electrified grids. Specifications: Colour: Black Watts: 40W Voltage: AC 220 - 240V Material: ABS & Aluminum IP Rating: IP54 Warranty: 1 Year

Get the DASHCAM AI2C 4G DUAL LENS DASHBOARD CAMERA WITH 4G, OBD POWER CABLE, TWO-WAY AUDIO, PRIVACY MODE, PARKING GUARD, VIBRATION DETECTION, GPS & SPEED MONITORING, REMOTE ACCESS & INSTANT NOTIFICATIONS online at Businessclaud Kenya and other Trendyproducts Security Devices on Businessclaud at the best price in Kenya ➤ Enjoy Free DELIVERY & Cash on Delivery available on eligible purchases.

Boost your productivity with TransPen, a high-precision active capacitive wireless stylus designed for seamless interaction with your touchscreen device. Its transparent design combines functionality with aesthetic appeal, providing precision in every stroke. Enjoy true 5D tilt pressure sensation, palm rejection technology, and up to 8 hours of continuous use. The stylus offers quick pairing via Bluetooth v5.0, eliminating the need for cables, and is compatible with iPads launched after 2018 and all applications supporting the Apple Pencil. Elevate your digital experience with TransPen. Specification Bluetooth Version: v5.0 Battery Type: Li-Polymer Battery Capacity: 100mAh Input Rating: 5V/0.1A Wireless Charging Distance: 1.5mm Wireless Charging Frequency: 900kHz Wireless Charging Rating: 5V/0.1A Wireless Charging Efficiency: 95% Total Charging Time: 2 Hours Total Playtime: 8 Hours Charging Cable Length: 30cm

Transcend External HDD 4TB

price in kenya : price shown/=

Transend 1TB Storage Capacity