Electronics

SMT2200I Key Features Cold-start capable Energy Meter Green mode High online efficiency Intuitive LCD Status Display Predictive replace battery date Pure sine wave output on battery Sequenced network shutdown and reboot Single switched outlet group Smartslot StruxureWare Central comptible Temperature-compensated battery charging

Key Features Cold-start capable Green mode High online efficiency LCD Status Display Pure sine wave output on battery Temperature-compensated battery charging Technical Specifications Part number: SMC2000I Output power capacity: 1.3 KWatts / 2.0 kVA Max Confidurable Power: 1.3 KWatts / 2.0 kVA Nominal Output Voltage: 230V Output Voltage Distortion: Less than 5% at full load. Output Frequency (sync to mains): 50 Hz Topology: Line Interactive Waveform Type: Sine Wave Output Connections: (6) IEC 320 C13 (Battery Backup), (1) IEC 320 C19 (Battery Backup) Nominal Input Voltage: 230V Input Frequency: 47 - 63 Hz Input Connections: IEC-320 C20 Input Voltage range for main operations: 180 - 287V Input voltage adjustable range for mains operation: 170 - 300V Other Input Voltages: 220, 240 Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 Interface Port(s): USB Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays Surge energy rating: 300Joules Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Warranty: 1 Year

Key Features SMT3000I Cold-start capable Green mode High online efficiency Intuitive LCD Status Display Pure sine wave output on battery Temperature-compensated battery charging

Technical Specifications Output Max Configurable Power (Watts) 8.0kWatts / 8.0kVA Output Voltage Distortion: Less than 2 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor - 3 : 1 Topology: Double conversion online Waveform type: Sine wave Bypass: Internal bypass (automatic and manual) Input Input frequency: 40 - 70 Hz Auto-sensing Input voltage range for main operations: 100 - 275 Adjustable (half load), 173 - 476 Adjustable (half load)V Other Input Voltages: 220 V, 240 V, 380 V, 415 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 1.5hour(s) Nominal Battery Voltage +/- 192 V (split battery referenced to neutral) Replacement Battery: APCRBC140 Expected Battery Life (years): 3 - 5 RBC Quantity: 2 Battery Charge Power (Watts): 1.144kWatts Extendable Run Time: 1 Runtime: View Runtime Graph Efficiency: View Efficiency Graph Communications & Management Interface Port(s) RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB Control panel: Multifunction LCD status and control console Audible Alarm: Audible and visible alarms prioritized by severity Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity: 1 Surge Protection and Filtering Surge energy rating: 480Joules Physical Maximum Height: 432MM, 43.2CM Maximum Width: 263MM, 26.3CM Maximum Depth: 715MM, 71.5CM Net Weight: 111.82KG Shipping weight: 126.82KG Shipping Height: 461MM, 46.1CM Shipping Width: 600MM, 60.0CM Shipping Depth: 1000MM, 100.0CM Color: Black Units per Pallet: 1.0 Environmental Operating Temperature: 0 - 40 °C Operating Relative Humidity: 0 - 95 (Non-condensing) % Operating Elevation: 0 - 3048meters Storage Temperature - 15 - 45 °C Storage Relative Humidity: 0 - 95 (Non-condensing) % Storage Elevation: 0 - 15240meters Audible noise at 1 meter from surface of unit: 55.0dBA Online thermal dissipation: 1497.0BTU/hr Protection Class: IP20 Conformance Approvals: CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE Sustainable Offer Status RoHS Compliant

Key Features High density, double-conversion on-line power protection with scalable runtime 10/100 BaseT Connection Green mode Battery failure notification LCD graphics display Technical Specifications Output power capacity: 10.0 KWatts / 10.0 kVA Max Confidurable Power: 10.0 KWatts / 10.0 kVA Nominal Output voltage: 230V Output Voltage Distortion: Less than 2% Output Frequency (sync to mains): 50/60Hz +/- 3 Hz Other Output Voltages: 220, 240 Load Crest Factor: 3 : 1 Topology: Double Conversion Online Waveform Type: Sine Wave Output Connections: (6) IEC 320 C13 (Battery Backup), (4) IEC 320 C19 (Battery Backup), (1) Hard Wire 3-wire (H N + G) (Battery Backup), (3) IEC Jumpers (Battery Backup) Bypass: Internal Bypass (Automatic and Manual) Nominal Input Voltage: 230V , 400V 3PH Input Frequency: 40 - 70 Hz (auto sensing) Input Connections: Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G) Input Voltage range for main operations: 160 - 275V Input voltage adjustable range for mains operation: 100 - 275 (half load), 173 - 476 (half load)V Other Input Voltages: 220, 240, 380, 415 Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time: 1.5hour(s) Nominal Battery Voltage: +/-192 V (split battery referenced to neutral) Expected Battery Life (years): 3 - 5 Interface Port(s): RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB Audible Alarm: Audible and visible alarms prioritized by severity Emergency Power Off (EPO): Yes Available SmartSlot™ Interface Quantity: 1 Surge energy rating: 480Joules Warranty: 1 Year

Key Features SRT6KXLI 10/100 BaseT Connection Battery failure notification Green mode LCD graphics display

Mod., Start-Up 5X8, Internal Maint Bypass Parallel Capability 9943 VAH DB-9 RS-232 SmartSlot SUVTPCOM Multi-function LCD status and control console

Hot-swappable batteries- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced, Rack/Tower convertible-Protects the initial investment in the UPS when migrating from tower to rack-mount environment,Scalable runtime-Allows additional run time to be quickly added as needed, User-replaceable batteries-Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other.

Key Features Cold-start capable Green mode High online efficiency LCD Status Display Pure sine wave output on battery Temperature-compensated battery charging Technical Specifications Color: Black Output power capacity: 600Watts / 1.0 kVA Max Confidurable Power: 600Watts / 1.0 kVA Nominal Output Voltage: 230V Output Voltage Distortion: Less than 5% at full load. Output Frequency (sync to mains): 50/60Hz +/- 3 Hz Topology: Line Interactive Waveform Type: Sine Wave Output Connections: (8) IEC 320 C13 (Battery Backup), (2) IEC Jumpers (Battery Backup) Nominal Input Voltage: 230V Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing) Input Connections: IEC-320 C14 Input Voltage range for main operations: 180 - 287V Input voltage adjustable range for mains operation: 170 - 300V Other Input Voltages: 220, 240 Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 RBC Quantity: 1 Interface Port(s): USB Control panel: Multi-function LCD status and control console Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays Surge energy rating: 455Joules Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Operating Temperature: 0 - 40 °C Operating Relative Humidity: 0 - 95 % Operating Elevation: 0-3000meters Storage Temperature: -15 - 45 °C Storage Relative Humidity: 0 - 95 % Storage Elevation: 0-15000meters Audible noise at 1 meter from surface of unit: 41.0dBA Online thermal dissipation: 100.0BTU/hr Approvals: CE, CSA, GOST, UL 1778, VDE RoHS: Compliant REACH: REACH: Contains No SVHCs Warranty: 1 Year

Features : Cold-start capable; Green mode; High online efficiency; LCD Status Display; Pure sine wave output on battery; Temperature-compensated battery charging; 2 years repair or replace warranty

Output power capacity 600Watts / 1.0kVA Output Connections (8) IEC 320 C13 (Battery Backup) (2) IEC Jumpers (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections IEC-320 C14 APC Smart-UPS C 1000VA LCD 230V with SmartConnect Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Includes: USB cable Cold-start capable Provides temporary battery power when the utility power is out. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. High online efficiency Reduces utility costs, generates less heat. LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. SmartConnect Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.

900W /1500VA,120V/USB Features : Cold-start capable; Green mode; High online efficiency; LCD Status Display; Pure sine wave output on battery; Temperature-compensated battery charging; 2 years repair or replace warranty

APC Smart-UPS, 1500VA Rack Mount, LCD 230V with SmartConnect Port SMC1500I-2UC Main Input Voltage 230 V Other Input Voltage 220V 240V Main Output Voltage 230 V Other Output Voltage 220V 240V rated power in W 900W rated power in VA 1500 VA product or component type Uninterruptible power supply (UPS) Input Connection Type IEC 320 C14 output connection type 4 IEC 320 C13 2 IEC Jumpers Number of rack units 2U number of cables 1 battery type Lead acid battery equipment Supplied equipment 30 Documentation CD Supplied equipment 30 installation guide Supplied equipment 30 Rack mounting brackets Supplied equipment 30 USB cable product line Smart-UPS

Features : Cold-start capable; Green mode; High online efficiency; LCD Status Display; Pure sine wave output on battery; Temperature-compensated battery charging; 2 years repair or replace warranty

SMC2000I-2U APC Smart-UPS C 2000VA 2U Rack mountable 230V Features : Cold-start capable; Green mode; High online efficiency; LCD Status Display; Pure sine wave output on battery; Temperature-compensated battery charging; 2 years repair or replace warranty

Key Features SMC3000I Cold-start capable Energy meter Green mode High online efficiency Intuitive LCD interface Predictive replace battery date Pure sine wave output on battery Sequenced network shutdown and reboot Single switched outlet group SmartSlot StruxureWare Data Center Expert compatible Temperature-compensated battery charging

SMC3000RMI2U Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network Businessclaud.com : CD with software , Documentation CD , Rack Mounting Brackets , Smart UPS signalling RS-232 cable , USB cable , User Manual

Maximises battery performance, life, and reliability through intelligent, precision charging Protects connected loads from surges, spiprice shown lightning, and other power disturbances Voltage regulation Provides remote power management of the UPS over the network 1KVA (1000VA) SMT1000I Smart-UPS, LCD, 230V - Black

SMT1000IC efficiency; Intuitive LCD Status Display; Predictive replace battery date; Pure sine wave output on battery; Single switched outlet group; SmartSlot; Temperature-compensated battery charging; 3 years repair or replace warranty (excluding battery) and 2 year for battery

Output: 700W / 1000VA Input: 230V 4x Battery Powered Outlets, 2x Jumpers 4 x IEC 320 C13, 2x IEC Jumpers Recharge Time: 3 Hours Audio Alarm RJ-45 Serial, SmartSlot, USB Ports LCD Status and Console Control Cold Start/Hot Swappable Batteries

APC Smart-UPS, Line Interactive, 1000VA, Rackmount 2U, 230V, 4x IEC C13 outlets, SmartConnect Port+SmartSlot, AVR, LCD

Key Features Cold-start capable Energy meter Green mode High online efficiency Intuitive LCD interface Predictive replace battery date Pure sine wave output on battery Single switched outlet group SmartSlot Temperature-compensated battery charging Technical Specifications Output power capacity: 1.0 KWatts / 1.5 kVA Max Confidurable Power: 1.0 KWatts / 1.5 kVA Nominal Output Voltage: 230V Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage Output Voltage Distortion: Less than 5% at full load. Output Frequency (sync to mains): 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal Other Outputs: 220, 240 Topology: Line Interactive Waveform Type: Sine Wave Output Connections: (2) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup) Nominal Input Voltage: 230V Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing) Input Connections: IEC-320 C14 Cord Length: 1.83meters Input Voltage range for main operations: 160 - 286V Input voltage adjustable range for mains operation: 151 - 302V Number of Power Cords: 1 Other Input Voltages: 220, 240 Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time: 3hour(s) Expected Battery Life (years): 3 - 5 Interface Port(s): SmartSlot , USB Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Available SmartSlot™ Interface Quantity: 1 Surge energy rating: 459Joules Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Warranty: 1 Year SMT1500I

Features : Cold-start capable; Green mode; High online efficiency; LCD Status Display; Pure sine wave output on battery; Temperature-compensated battery charging; 2 years repair or replace warranty , Input : IEC-320 C14 RBC7 * 1 Battery 408 VAH SmartSlot, USB

Run time for load 1000 W: 7min 9s Main Input Voltage: 230 V Main Output Voltage: 230 V Rated Power in W: 1000 W Rated Power in VA: 1500 VA Input Connection Type: IEC 320 C14 Output Connection Type: 4 IEC 320 C13 / 2 IEC Jumpers Number of Rack Unit: 2U Battery Type: Lead-acid Battery Height: 8.6 cm Width: 43.2 cm Depth: 47.7 cm Net Weight: 26.1 kg Provided equipment: Installation guide Rack mounting support rails USB cable

Features : Cold-start capable; Energy meter; Green mode; High online efficiency; Intuitive LCD Status Display; Predictive replace battery date; Pure sine wave output on battery; Sequenced network shutdown and reboot; Single switched outlet group; SmartSlot; StruxureWare Central compatible; Temperature-compensated battery charging; 3 years repair or replace (excluding battery) and 2 year for battery

APC Smart-UPS 3000VA LCD RM 2U 230V with AP9631 Network Card Output : (1) IEC 320 C19 (Battery Backup) , (8) IEC 320 C13 (Battery Backup) (3) IEC Jumpers (Battery Backup) Input : IEC-320 C20 2 U Rack Height Multi-function LCD status and control console , RJ-45 10/100 Base-T, RJ-45 Serial, SmartSlot, USB, APCRBC 43 , 547 VAH . Pure Sine wave .Cold-start capable; Energy meter; Green mode; High online efficiency; Intuitive LCD Status Display; Predictive replace battery date; Pure sine wave output on battery; Sequenced network shutdown and reboot; Single switched outlet group; SmartSlot; StruxureWare Central compatible; Temperature-compensated battery charging; years repair or replace (excluding battery) and 2 year for battery

APC Smart-UPS 750VA LCD with Smart Connect 230V Features : Cold-start capable; Energy meter; Green mode; High online efficiency; Intuitive LCD interface; Predictive replace battery date; Pure sine wave output on battery; SmartSlot; Temperature-compensated battery charging; 2 years repair or replace warranty

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers Includes: Documentation CD, USB cable, User Manual APC Easy UPS Line-interactive SMV 1000VA 230V, Universal Outlet

SMV1500AI-MS APC Easy UPS SMV 1500VA, Universal Outlet, 230V The best inverter with battery backup and surge protection for electronics and computers Includes: Documentation CD, USB Cable, User Manual Automatic regulation of the voltage Increases low voltages and lowers high voltages to levels suitable for your equipment automatically. Cold start possible Provides temporary battery power in case of power failure. LCD graphic display Schematic text and diagrams that display operating modes, system settings, and alarms. Pure sinusoidal output on battery Simulates mains power to provide the highest degree of compatibility with sensitive electronic equipment and active servers with Power Factor Correction (PFC). Easy-UPS UPS Features and Benefits Characteristics Elegant design Their modern and slim design can be vertical, flat or wall mounted, to easily adapt to all electronic configurations and interior design. Automatic regulation of the voltage (AVR) by amplification Preserves the battery life and optimizes the operating time by correcting low voltages without discharging the battery. Cold start possible Provides temporary battery power in case of power failure. Spaced plugs of transformer blocks Protects equipment with input transformer blocks without disabling access to other receptacles. Availability Intelligent battery management Maximizes performance, battery life and battery reliability through a smart precision charging process. Advanced security features Protect your domestic inverter against overloads, excessive mains voltagesprice shownort circuits, installation problems, and battery damage due to low voltages. Notification of battery failure Provides a battery failure analysis function with early warning, enabling timely preventive maintenance Protection Battery backup and arrester The outlets allow network gateway equipment and other low-power critical devices to continue to run for hours so that you always have access to the Internet during a power outage. Battery and surge protected outlets Back up and protect your hardware and data in the event of power outages, surges, or peaks. security Homologated by a Security Office Guarantees that the product has been tested and certified as safe for use with connected loads and in the environment. Simplicity of management LED Indicators Allows easy reading of the status of the mains supply, the inverter and the battery. Sound alarms Informs of the change in the conditions of the mains supply and the inverter. Output power capacity 1.05kWatts / 1.5kVA Configurable power max. (Watts) 1.05kWatts / 1.5kVA Rated output voltage 230 Output frequency (non-sync) 50/60 Hz +/- 1 Hz Load peak factor 3:01 Technology Line interactive Type of waveform Sine Transfer time 2ms typical

Output power capacity 1.4kWatts / 2.0kVA Max Configurable Power (Watts) 1.4kWatts / 2.0kVA Nominal Output Voltage 230V Output Frequency (not synced) 50/60 Hz +/-1 Hz Load Crest Factor 3 : 1 Topology Line Interactive Waveform type Sine wave Transfer Time 2ms typical Input Nominal Input Voltage 230V Input frequency 45 - 65 Hz (auto sensing) Input Connections IEC-320 C14 Input voltage range for main operations 157 - 303V Number of Power Cords 1 Other Input Voltages 220, 240

Output power capacity 2.1kWatts / 3.0kVA Max Configurable Power (Watts) 2.1kWatts / 3.0kVA Nominal Output Voltage 230V Output Frequency (not synced) 50/60 Hz +/-1 Hz Load Crest Factor 3 : 1 Topology Line Interactive Waveform type Sine wave Transfer Time 2ms typical Input Nominal Input Voltage 230V Input frequency 45 - 65 Hz (auto sensing) Input Connections IEC-320 C20 Input voltage range for main operations 157 - 303V Number of Power Cords 1 Other Input Voltages 220, 240 Batteries & Runtime Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time 4hour(s) Expected Battery Life (years) 3 - 5 Battery Volt-Amp-Hour Capacity 395

input voltage 230 V Input voltage 220 V output voltage 230 V rated power in W 525 W rated power in VA 750 VA plug standard IEC 60320 C14 nb of power socket outlets 4 universal receptacle number of cables 1 battery type Lead-acid battery provided equipment Documentation CD User manual USB cable General Number of power module free slots 0 Number of power module filled slots 0 redundant No UPS size WS Physical colour Black height 22 cm width 16 cm depth 41 cm net weight 13.6 kg mounting preference No preference mounting mode Not rack-mountable two post mountable 0 USB compatible No Input network frequency 45...65 Hz +/- 1 Hz auto-sensing input voltage limits 165...290 V Output Maximum configurable power in W 525 W output frequency 50/60 Hz +/- 1 Hz unsynchronised crest factor 3 : 1 UPS type Line interactive Wave type Sine wave graph display 1 Maximum configurable power in VA 750 VA Transfer time 2-6 ms typical : 12 ms maximum Conformance product certifications CE standards EN/IEC 62040-1 EN/IEC 62040-2 Environmental ambient air temperature for operation 0…40 °C relative humidity 0…95 % non-condensing operating altitude 0...3000 m ambient air temperature for storage -10…40 °C storage Relative Humidity 0…95 % Non-condensing storage altitude 0…15000 m acoustic level 45 dBA IP degree of protection IP20 Batteries & Runtime Run Time View Runtime Graph Efficiency View Efficiency Graph number of battery filled slots 0 number of battery free slots 0 Battery recharge time 4 h battery voltage 24 V battery charger power 33 W rated battery life 3…5 year(s) extended runtime 0 Communications & Management alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Surge Protection and Filtering Surge energy rate 190 J Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 16.6 kg Package 1 Height 33.9 cm Package 1 width 27.2 cm Package 1 Length 50.8 cm Contractual warranty Warranty 2 years repair or replace

APC Smart-UPS RT 10000VA 230V,10.0 KWatts / 10.0 kVA Main Input Voltage 230 V 400 V 3 phases Other Input Voltage 220 V 240 V 380 V 415 V Main Output Voltage 230 V Other Output Voltage 220 V 240 V rated power in W 10000 W rated power in VA 10000 VA nb of power socket outlets 6 IEC 60320 C13 3 IEC Jumpers 4 IEC 60320 C19 output connector type Hard wire 3-wire (H N + E) 1 battery type Lead-acid battery provided equipment CD with software Documentation CD Installation guide Temperature probe USB cable Warranty card Web/SNMP management card Generalproduct web sub-family High density Number of power module free slots 0 Number of power module filled slots 0 redundant No Physicalcolour Black height 43.2 cm width 26.3 cm depth 71.5 cm net weight 111.82 kg mounting location Front mounting preference No preference mounting mode Rack-mounted with kit two post mountable 0 USB compatible Yes Inputnetwork frequency 40...70 Hz auto-sensing number of input connectors 1 hard wire 3-wire (1P + N + E) 1 hard wire 5-wire (3P + N + E) input voltage limits 100...275 V adjustable (half load) 173...476 V adjustable (half load) OutputMaximum configurable power in W 10000 W harmonic distortion Less than 2 >#/span### output frequency 50/60 Hz +/- 3 Hz sync to mains crest factor 3 : 1 UPS type Double conversion online Wave type Sine wave bypass type Internal bypass (automatic and manual) Maximum configurable power in VA 10000 VA Conformanceproduct certifications CE EAC IRAM RCM VDE marking CE Mark standards EN/IEC 62040-1 EN/IEC 62040-2 Environmental ambient air temperature for operation 0…40 °C relative humidity 0…95 >#/span### operating altitude 0...10000 ft ambient air temperature for storage -15…45 °C storage Relative Humidity 0…95 % Non-condensing storage altitude 0.00…15240.00 m acoustic level 55 dBA heat dissipation 1947 Btu/h IP degree of protection IP20 Batteries & Runtime Run Time Efficiency number of battery filled slots 0 Battery recharge time 1.5 h number of battery replacement quantity 2 battery voltage +/- 192 V (split battery referenced to neutral) battery charger power 1195 W rated Battery power in VAH 1805 VAh runtime battery life 3…5 year(s) battery option SRT192BP2 1 3610 VAh SRT192BP2 2 5415 VAh SRT192BP2 3 7220 VAh SRT192BP2 4 9025 VAh SRT192BP2 5 10830 VAh SRT192BP2 6 12635 VAh SRT192BP2 8 16245 VAh SRT192BP2 10 19855 VAh extended runtime 1 Communications & Managementfree slots 1 control panel Multifunction LCD status and control console alarm Audible and visible alarms prioritized by severity Emergency power off Yes Surge Protection and FilteringSurge energy rate 480 J Packing UnitsPackage 1 Weight 126.82 kg Package 1 Height 46.1 cm Package 1 width 60 cm Package 1 Length 100 cm

1500VA/1500W double-conversion on-line pure sine wave tower UPS Ideal for servers, storage, voice/data networks, medical labs, and light industrial applications Rack/Tower convertible (rail kit SRTRK2 or SRTRK3 sold separately) Delivers clean power with zero transfer time for critical or sensitive devices Add up to 10 external battery packs (SRT48BP) for extended runtime For more information clickhere

APC Smart-UPS On-Line, 2200VA, Tower, 230V, 8x C13+2x C19 IEC outlets, SmartSlot, Extended runtime, W/O rail kit 2200VA/1980W double-conversion on-line pure sine wave tower UPS Ideal for servers, storage, voice/data networks, medical labs, and light industrial applications Rack/Tower convertible (rail kit SRTRK4 or SRTRK3 sold separately) Delivers clean power with zero transfer time for critical or sensitive devices Add up to 10 external battery packs (SRT72BP) for extended runtime For more information clickhere

Max Configurable Power (Watts) 2.7kWatts / 3.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Output Voltage Distortion Less than 2% Output Frequency (sync to mains) 50/60Hz +/- 3 Hz Other Output Voltages 220, 240 Load Crest Factor 3 : 1 Topology Double Conversion Online Waveform type Sine wave Bypass Internal Bypass (Automatic and Manual) Input Input frequency 40 - 70 Hz (auto sensing) Input voltage range for main operations 160 - 275V Input voltage adjustable range for mains operation 100 - 275 (half load)V Number of Power Cords 3 Other Input Voltages 220, 240 Batteries & Runtime Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time 3hour(s) Nominal Battery Voltage 96V Replacement Battery APCRBC152 Expected Battery Life (years) 3 - 5 RBC Quantity 1 Extendable Run Time 1 Battery Volt-Amp-Hour Capacity 505

General provided equipment Smart UPS signalling RS-232 cable User manual Number of tare power 174.6 W Number of power module free slots 0 Number of power module filled slots 0 redundant No UPS size S Physical depth 62 cm height 21.7 cm mounting preference No preference net weight 81.12 kg mounting mode Rack-mounted with kit two post mountable 0 USB compatible No width 44 cm Input network frequency 40...70 Hz auto-sensing number of input connectors 1 hard wire 3-wire (1P + N + E) input voltage limits 160...285 V Input voltage 220 V 240 V maximum input current 30 A max short time withstand current 40 kA input voltage 230 V Output rated power in W 10000 W Maximum configurable power in W 10000 W harmonic distortion Less than 2 % output frequency 50/60 Hz +/- 3 Hz sync to mains Output voltage 220 V 240 V crest factor 3 : 1 UPS type Double conversion online Wave type Sine wave output connector type Hard wire 3-wire (H N + E) 1 nb of power socket outlets 2 IEC 60320 C13 1 IEC 60320 C19 bypass type Internal bypass (automatic and manual) curve equation Efficiency curve fixed loss 0.0130 curve load maximum 100 % curve load minimum 2 % curve proportional loss 0.0242 curve square loss 0.0229 curve X-axis maximum 100 % curve test cond ID Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output. curve X-axis minimum 0 % curve X-axis title Load curve X-axis units Percentage curve Y-axis maximum 100 % curve Y-axis minimum 50 % curve Y-axis title Efficiency curve Y-axis units Percentage full load runtime 00:03:30 10000 W graph display 1 half load runtime 00:11:00 5000 W output voltage 230 V Maximum configurable power in VA 10000 VA rated power in VA 10000 VA Environmental ambient air temperature for operation 0…40 °C relative humidity 0…95 % non-condensing operating altitude 0...6600 ft ambient air temperature for storage -15…45 °C storage Relative Humidity 0…95 % Non-condensing storage altitude 0.00…15240.00 m acoustic level 55 dB heat dissipation 2217.98 Btu/h show note OP temperature No IP degree of protection IP20 Batteries & Runtime battery type Lead-acid battery number of battery filled slots 0 number of battery free slots 0 Battery recharge time 4 h additional information Configurable for 220 : 230 or 240 nominal output voltage liquid value 0 battery voltage +/- 96 V battery curve D battery charger power 431 W rated Battery power in VAH 1772 VAh runtime battery life 3…5 year(s) battery option SRTG192XLBP4 1 3564 VAh SRTG192XLBP4 2 5415 VAh SRTG192XLBP4 3 7378 VAh SRTG192XLBP4 4 9216 VAh extended runtime 1 Communications & Management preinstalled device Network management card control panel LED Status display with on line : on battery Multifunction LCD status and control console alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency power off Yes Surge Protection and Filtering Surge energy rate 600 J Packing Units Package 1 Weight 83.14 kg Package 1 Height 41.4 cm Package 1 width 59 cm Package 1 Length 79 cm

Output power capacity 5.0kWatts / 5.0kVA Output Connections (1) Hard wire 3-wire (H N + E) (Battery Backup) (2) IEC 60320 C13 (Battery Backup) (1) IEC 60320 C19 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections Hard wire 3-wire (1P + N + E) APC Smart-UPS On-Line, 5kVA/5kW, Rack/Tower, 230V, 2x IEC C13+1x IEC C19+Hard wire 3-wire (H+N+E) outlets, Network Card, Rail kit excluded High density, double-conversion on-line power protection with scalable runtime Includes: Smart UPS signalling RS-232 cable, USB cable, User manual Max Configurable Power (Watts) 5.0kWatts / 5.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Output Voltage Distortion Less than 2 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 - 70 Hz Auto-sensing Input voltage range for main operations 160 - 285V Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Included Battery Modules 2 Typical recharge time 4hour(s) Nominal Battery Voltage +/- 96 V Expected Battery Life (years) 3 - 5 Battery Charge Power (Watts) 239 Watts Extendable Run Time 1 Battery Volt-Amp-Hour Capacity 960 Runtime View Runtime Graph Efficiency View Efficiency Graph Communications & Management Interface Port(s) RJ-45 Serial, Smart-Slot, USB Control panel LED Status display with on line : on battery, Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 178MM, 17.78CM Maximum Width 440MM, 44.0CM Maximum Depth 620MM, 62.0CM Net Weight 51.9KG Shipping weight 59.0KG Shipping Height 275MM, 27.5CM Shipping Width 590MM, 59.0CM Shipping Depth 790MM, 79.0CM Environmental Operating Temperature 0 - 40 °C Operating Relative Humidity 0 - 95 (Non-condensing) % Operating Elevation 0 - 2011.68meters Storage Temperature -15 - 45 °C Storage Relative Humidity 0 - 95 (Non-condensing) % Storage Elevation 0 - 15240meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1109.0BTU/hr Protection Class IP20

30V, 2x IEC C13+1x IEC C19+Hard wire 3-wire (H+N+E) outlets, Network Card, W/O rail kit Run time for load 1m 31s Max. Capacity Used 100% Output power capacity 6.0kWatts / 6.0kVA Output Connections (1) IEC 60320 C19 (Battery Backup) (2) IEC 60320 C13 (Battery Backup) (1) Hard wire 3-wire (H N + E) (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections Hard wire 3-wire (1P + N + E)

Max. Capacity Used 100% Output power capacity 6.0kWatts / 6.0kVA Rack Height 5U Output Connections (1) Hard wire 3-wire (H N + E) (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections Hard wire 3-wire (1P + N + E) APC Easy UPS On-Line SRV 6000VA RM 230V with Extended Runtime Battery Pack, Rail Kit High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions. Includes: (1) DC cable, Basic UPS signalling RS-232 cable, CD with software, Rack mounting brackets, Rack mounting support rails, USB cable, User manual Automatic internal bypass Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Intelligent SmartSlot Mini slot supports various optional management cards which provide basic or essential monitoring, management and control features for the UPS. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Serial connection Use your PC to access additional power protection and management features for your UPS via a serial port. USB connectivity Provides management of the UPS via a USB port (not available on all models). Easy UPS On-Line Features & Benefits Serviceability Disconnected battery notification Warns when a battery is not available to provide backup power. Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Manageability Network manageable Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded. Serial connectivity Provides management of the UPS via a serial port. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. LED Indicators Provide easy-to-read status of the unit and utility power conditions. Intelligent Card Slot Customize UPS capabilities with management cards. Features ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring. Management Software Double conversion on-line topology Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source. Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High efficiency High efficiency rates that remain stable even at lower operating power levels Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Management Software Allows you to easily monitor your utility power and manage your UPS. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Availability Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

Availability Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Features Double conversion on-line topology Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source. ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring. Management Software Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Management Software Allows you to easily monitor your utility power and manage your UPS. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Input Power Factor Correction Minimizes installation costs by enabling the use of smaller generators and cabling. Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. High efficiency High efficiency rates that remain stable even at lower operating power levels Serviceability Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Manageability LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Network manageable Provides remote power management of the UPS over the network. Serial connectivity Provides management of the UPS via a serial port. SmartSlot Customize UPS capabilities with management cards. LED Indicators Provide easy-to-read status of the unit and utility power conditions. Product Distribution Afghanistan, Albania, Armenia, Argentina, Australia, Bosnia and Herzegovina, Belgium, Benin, Botswana, Belarus, Cameroon, Cyprus, Czech Republic, Denmark, Dominica, Estonia, Egypt, Finland, France, United Kingdom, Georgia, Guadeloupe, Greece, Croatia, Hungary, Indonesia, Ireland, Israel, Iceland, Italy, Jordan, Cambodia, South Korea, Kazakhstan, Lebanon, Lithuania, Luxembourg, Latvia, Morocco, Macedonia, Myanmar, Mongolia, Martinique, Malta, Mauritius, Malawi, Malaysia, Netherlands, New Zealand, Philippines, Pakistan, Poland, Portugal, Romania, Russia, Sweden, Slovenia, Slovakia, Thailand, Ukraine, Uzbekistan, Vietnam, Zambia Technical Specifications Print Download Output Max Configurable Power (Watts) 10.0kWatts / 10.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220, 240 Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 - 70 Hz Input voltage range for main operations 110 - 300 Adjustable (half load), 176 - 300V Efficiency at Full Load 94.0 % Other Input Voltages 220, 240 Batteries & Runtime Battery type Lead-acid battery Typical recharge time 3hour(s) Battery Charge Power (Watts) 502 Watts Extended Run Options APC-Easy-UPS-On-Line-SRV-RM-10000VA-230V-with-External-Battery-Pack-with-RailKit Communications & Management Interface Port(s) DB-9 RS-232, Intelligent Smart Slot, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 220MM, 21.95CM Maximum Width 438MM, 43.8CM Maximum Depth 615MM, 61.5CM Net Weight 78.0KG Shipping weight 88.0KG Shipping Height 490MM, 49.0CM Shipping Width 600MM, 60.0CM Shipping Depth 870MM, 87.0CM Color Black Environmental Operating Temperature 0 - 40 °C Operating Relative Humidity 0 - 95 (Non-condensing) % Operating Elevation 0 - 3048meters Storage Temperature -15 - 60 °C Storage Relative Humidity 0 - 95 (Non-condensing) % Storage Elevation 0 - 15240meters Audible noise at 1 meter from surface of unit 58.0dBA Protection Class IP20 Conformance Approvals CE, IEC 62040-1-1, IEC 62040-1-2

APC Easy UPS SRV RM 10000VA 230V ,with RailKit, External Battery Pack

Main Input Voltage 230 V Other Input Voltage 220 V 240 V Main Output Voltage 230 V Other Output Voltage 220 V 240 V rated power in W 800 W rated power in VA 1000 VA Input Connection Type IEC 60320 C14 nb of power socket outlets 3 IEC 60320 C13 cable length 1.50 m number of cables 1 provided equipment Basic UPS signalling RS-232 cable USB cable CD with software User manual IEC-C14 - Shuko input power cord C13-C14 power cord General max runtime 4 min Number of power module filled slots 0 Number of power module free slots 0 redundant No Physical colour Black height 22.3 cm width 14.5 cm depth 28.8 cm net weight 9.3 kg mounting location Front mounting preference No preference mounting mode Not rack-mountable USB compatible Yes mounting position Vertical Input input voltage limits 110...285 V half load 160...280 V full load network frequency 40...70 Hz auto sensing Output Maximum configurable power in VA 1000 VA Maximum configurable power in W 800 W output frequency 50/60 Hz +/- 3 Hz sync to mains harmonic distortion 3 >#/span### UPS type Double conversion online Wave type Sine wave efficiency 88 % (full load) additional information Configurable for 220 : 230 or 240 nominal output voltage bypass type Internal bypass (automatic and manual) crest factor 3 : 1 Conformance product certifications CE EAC TISI standards EN/IEC 62040-1 EN/IEC 62040-2 Environmental ambient air temperature for operation 0…40 °C relative humidity 0…95 % non-condensing operating altitude 0...3000 m ambient air temperature for storage -20…50 °C storage Relative Humidity Non-condensing 0…95 >#/span### storage altitude 0…15000 m acoustic level 50 dBA heat dissipation 372 Btu/h IP degree of protection IP20 Batteries & Runtime battery type Lead-acid battery battery voltage 24 V number of battery filled slots 1 number of battery free slots 0 Battery recharge time 4 h battery life 3…5 year(s) battery charger power 30 W rated Communications & Management alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm control panel Multifunction LCD status and control console free slots 1 Surge Protection and Filtering Surge energy rate 600 J Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 10.600 kg Package 1 Height 32.995 cm Package 1 width 23.495 cm Package 1 Length 36.500 cm Contractual warranty Warranty 2 years repair or replace

Key Features Max. Capacity Used: 100% Output power capacity: 800 Watts / 1.0kVA Rack Height: 2U Output Connections: (3) IEC 60320 C13 (Battery Backup) Nominal Output Voltage: 230V Nominal Input Voltage: 230V Input Connections: IEC 60320 C14 Cord Length: 1.5meters Automatic internal bypass - Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load. Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power. Automatic updates and backups - Updates and backups are automatically applied to always provide the most current solution. ECO Mode - Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging. LCD graphics display - Text and mimic diagrams that display modes of operation, system parameters and alarms. Serial connection - Use your PC to access additional power protection and management features for your UPS via a serial port. USB connection - Use your PC to access additional power protection and management features for your UPS via a USB Port.

Brand: APC; Condition: New; Device Mounting: Rack Mount; Warranty Issuer: Manufacturer

2000VA/1600W Double Conversion Online Pure Sine Wave Tower Inverter High operational efficiency in energy-saving ECO mode Add up to 4 external battery packs (SRV72BP-9A) for extended runtime For more information clickhere

APC Easy UPS On-Line, 2000VA/1600W, Rackmount 4U, 230V, 4x IEC C13 outlets, Intelligent Card Slot, LCD, Extended runtime, W/ rail kit For more information clickhere